Abstract:A novel technical solution about helically coiled tube-in-tube (HCTT) heat exchanger with double cooling source is proposed to obtain regeneratively cooled air for advance aeroengine. 54 simulation runs are performed according the Box-Behnken design table, in which the effect of geometrical and operating parameters on performance of heat exchanger are well considered. Grid independence was carefully carried out referring to ASME V&V 20–2009. The simulation model is validated based on comparison with available experimental data and analysis of flow pattern. The performance of the HCTT heat exchanger i.e. entropy generation number Ne, absorption heat ratio of the inner tube η, and out temperature of the regeneratively cooled air Ta,out were evaluated using Response Surface Methodology. The significance of each term in regression model has been checked by analysis of variance. The results shows that all the design variables are significant for predicting Ne, η, and Ta,out, except non-dimensional coil pitch λ for finding η; the regression models have a good prediction performance; outer tube curvature ratio (δo) is the most significant structure parameter affecting Ne and Ta,out, while inner tube curvature ratio (δi) is the most significant linear term for predicting η, indicating that δo and δi are key structure parameters. It also shows that heat transfer characteristics of the HCTT heat exchanger are complicated engineering problem subjected to multi factors interaction. For instance, total number of terms in model for predicting η reaches to 18, including 5 linear terms, 10 interaction terms along with 3 square terms. The influences of all interaction terms on Ne, η, and Ta,out were displayed using 3D surface graph, the effect rule of interaction terms were discussed in details. Desirability function approach was employed to conduct multi-objective optimization for goals of Ta,out = 630 K, and minimum Ne and η. The optimum values of design variable were obtained. This method possesses practical significances for prediction and optimization of HCTT heat exchanger.

Multi-response Optimization of Geometric and Flow Parameters in a Heat Exchanger Tube with Perforated Disk Inserts by Taguchi Grey Relational Analysis

Multi-Objective Optimization of Plate-Fin Heat Exchanger Using Taguchi-based Grey Relational Analysis

Globally Optimal Design of Intensified Shell and Tube Heat Exchangers Using Complete Set Trimming

Thermal-Hydraulic Performance and Optimization of Tube Ellipticity in a Plate Fin-And-Tube Heat Exchanger

Multi-Objective Finned-Tube Heat Exchanger Optimization Using a Genetic Algorithm

Performance analysis and multi-objective optimization for tubes partially filled with gradient porous media

Hybrid optimization algorithm for enhanced performance and security of counter-flow shell and tube heat exchangers

Analysis, prediction and multi-objective optimization of helically coiled tube-in-tube heat exchanger with double cooling source using RSM

Parametric optimization of a spiral ground heat exchanger by response surface methodology and multi-objective genetic algorithm

Optimization of H-type finned tube heat exchangers with combinations of longitudinal vortex generator, dimples/protrusions and grooves by Taguchi method

Application of Response Surface Methodology and Artificial Neural Network to Optimize the Curved Trapezoidal Winglet Geometry for Enhancing the Performance of a Fin-and-Tube Heat Exchanger

Computational and statistical analysis on the U‐tube heat exchanger with different passes configuration: Taguchi method

Experimental investigation and multi-objective optimization of a novel multi-fluid heat exchanger performances using response surface methodology and genetic algorithm

Enhancing heat transfer efficiency in corrugated tube heat exchangers: A comprehensive approach through structural optimization and field synergy analysis

Optimized design of Helical-Finned Double Pipe heat exchangers via numerical simulation and Artificial Intelligence

Performance optimization for an optimal operating condition for a shell and heat exchanger using a multi-objective genetic algorithm approach

Optimization of thermal and flow characteristics of plate heat exchanger with variable structure parameter

Multi-objective optimization of a double helical coil heat exchanger using response surface method and genetic algorithm

Flow and heat transfer optimization of a fin-tube heat exchanger with vortex generators using Response Surface Methodology and Artificial Neural Network

Prediction of optimal dimensions and arrangements of circular tubes of a fin and tube heat exchanger for an improved thermal-hydraulic performance

Comparison of different configurations of a solar-assisted ground-source CO2 heat pump system for space and water heating using Taguchi-Grey Relational analysis