Abstract:Temperature plays an important impact on rock mechanical properties. In this paper, the mechanical properties, fracture mechanism and constitutive model of marble under 20–120 °C and 15 MPa are studied. The results show marble deformation can be divided into four stages: compaction, linear elasticity, crack propagation and post-peak failure. Stress–strain curve is not obviously affected by temperature. Macroscopic fracture characteristics change from shear failure to tensile mixed failure with temperature increasing. With the increase of temperature, the strength of marble tends to decrease, indicating that temperature increase has a weakening effect on marble, and there are temperature-sensitive areas of 20–60 °C and temperature sub-sensitive areas of 60–120 °C. The elastic modulus of marble decreases and Poisson's ratio increases with increasing temperature. The energy evolution law of marble under different temperature is basically the same, which shows that before crack initiation, the energy dissipation is less, and after the damage and yielding occurs, the energy dissipation increases quickly. The energy dissipation in the failure process is mainly used for crack initiation-connection-penetration, as well as plastic deformation caused by friction and slip of cracks, and the plastic deformation and energy dissipation have good linear characteristics. The statistical damage constitutive model based on three-parameter Weibull distribution function can effectively reflect the characteristics of post-peak plastic deformation and strain softening. The weakening effect of marble at 20–120 °C is related to its internal moisture excitation. With the increase of temperature, water is stimulated to absorb and attach to the original relatively dry interface, which plays a role in lubrication. The relative motion friction resistance between solid particles or crack surfaces decreases, which leads to crack initiation and friction energy consumption reduction, changes the specific surface energy of rocks and weakens the strength of marble. The results provide a theoretical basis for predicting and evaluating the long-term stability and safety of surrounding rock of underground deep engineering in complex environment with high ground temperature and high geo-stress.

Experimental Study on the Thermal Damage Characteristics of Limestone and Underlying Mechanism

Experimental study of the effect of high temperature on primary wave velocity and microstructure of limestone

Experimental Study on Mechanical and Porous Characteristics of Limestone Affected by High Temperature

Experimental Study on Dynamic Mechanical Properties and Energy Evolution Characteristics of Limestone Specimens Subjected to High Temperature

Mesoscopic and macroscopic investigation of a dolomitic marble subjected to thermal damage

Damage Mechanism and Heat Transfer Characteristics of Limestone after Thermal Shock Cycle Treatments Based on Geothermal Development

Microscopic characteristics and thermodynamic property changes in limestone under high-temperature treatment

Microstructural Characterization of Limestone Exposed to Heat with XRD, SEM and TG-DSC

Experimental study on response characteristics of micro–macroscopic performance of red sandstone after high-temperature treatment

Experimental Study on Thermal Damage and Energy Evolution of Sandstone after High Temperature Treatment

A Micromechanical-Based Failure Criterion for Rocks after High-Temperature Treatment

Pore, mechanics and acoustic emission characteristics of limestone under the influence of temperature

The Influence of Temperatures on the Mechanical Properties and Fracture Behavior of Rocks under Mixed Mode I/II Loading

Mechanical Properties of Limestone After High-Temperature Treatment Under Triaxial Cyclic Loading and Unloading Conditions

Experimental study on the variation of physical and mechanical of rock after high temperature treatment

Thermal Damage on Claystone After Exposure to Different High Temperatures: A Review

Preparing rock samples using high temperature heating damage method and its application

Fracture mechanism and constitutive model considering post-peak plastic deformation of marble under thermal–mechanical action

Study on creep characteristics and fractional creep damage constitutive model of limestone under thermal-mechanical action

Physical and Mechanical Properties and Damage Mechanism of Sandstone at High Temperatures

The effect of thermal damage on the electrical resistivity of sandstone