Abstract:The perforated panels are widely used in noise control and loudspeaker systems. Besides the inner acoustic impedance of each aperture,the interactions among apertures have some effects on the acoustic impedance of the perforated panel. The previous studies on the acoustic impedance of the perforated panel use the following three methods:the simplified analytical methods,the experimental methods and the numerical methods. The aforesaid analytical methods and experimental methods are limited due to some special restrictions. Although the numerical methods can predict the acoustic impedance of the perforated panel accurately,it is not convenient in practical situations. A simple analytical model is proposed to simulate the acoustic impedance of the perforated panel. Considering each aperture in the perforated panel as a sound source,the total sound field radiated by the system is the sum of each individual sound field radiated by each aperture. The mutual radiation impedance between one aperture and other apertures is obtained on the basis of the self radiation impedance of the aperture. Then the total impedance of each aperture,including the inner impedance and the radiation impedance,can be obtained. And the total acoustic impedance of the perforated panel can be derived. The proposed model and the previous model are applied to simulate the acoustic impedances of two perforated panels with different perforations,and the differences between two models are compared. It is shown that when the frequency increases,the interactions among apertures become small,and the difference between the acoustic impedances calculated by two models decreases. It is also found that when the distance among apertures increases,the interactions among apertures become small. The equivalent circuit method is used to calculate the frequency responses of actual loudspeaker systems with the perforated panels in front of the loudspeakers,and the acoustic impedances of the perforated panels are calculated with both of the mentioned two models. The frequency responses of the actual loudspeaker systems are also measured in an anechoic chamber. For the loudspeaker system with a single aperture in the perforated panel,both of the simulated frequency responses are similar to the experimental results. For the loudspeaker system with three or seven apertures in the perforated panel,the simulated frequency response calculated by the proposed model is closer to the experimental result,and the other simulated frequency response calculated by the previous model diverges a lot from the experimental result,especially for the resonant frequency in the medium-high frequency range. And the resonant frequency is determined by the acoustic reactance of the perforated panel and the acoustic compliance of the front cavity. It is confirmed that the proposed model is more accurate as the interactions among apertures have large effects on the acoustic impedance of the perforated panel when the distance between apertures is not large.

Acoustic Properties of Micro-Perforated Panel Absorber Having Arbitrary Cross-Sectional Perforations

Ultra-broadband sound absorption in a compact multi-chamber micro-perforated panel absorber with varying depths

Experimental Research of Noise Control in the Fighter Cockpit Using Microperforated Panel Absorber Structure

Acoustics Property Measurement and Analysis of Flexible Micro-perforated Panel Absorber

Broaden the sound absorption band by using micro-perforated plate back cavities with different cross-sectional areas

Modeling and optimization of sound absorption coefficient of microperforated compressed porous metal panel absorber

Broadband sound absorption based on impedance decoupling and modulation mechanisms

Structural acoustic controlled active micro-perforated panel absorber for improving wide-band low frequency sound absorption

Customized sound mitigation with micro-perforated panels

Bandwidth widening for sound absorption of a flexible microperforated panel backed by a multi-frequency panel-type resonator

Equivalent Circuit Method Based Double Layer Micro-perforated Panel (MPP) Design to Widen the Sound Absorption Bandwidth

On improving low-frequency sound absorption using a compound microperforated panel backed by a panel-type resonator with tuned multi-frequency resonators

A study on the acoustic impedance model of perforated panels

Design and Acoustical Performance Investigation of Sound Absorption Structure Based on Plastic Micro-Capillary Films

Sound absorption properties of the metamaterial curved microperforated panel

A Composite Sound Absorber with Micro-Perforated Panel and Shunted Loudspeaker

A parallel piezoelectric micro-perforated panel absorber with flexible acoustic characteristics

Effects of structure design on resilience and acoustic absorption properties of porous flexible-foam based perforated composites

Low-Frequency Wideband Sound Absorption Properties of Composite Layer Micro-perforated Panel Absorber

Improvement of the sound absorption performance of sandwich panel using inhomogeneous micro-perforations

A broadband sound absorber of hybrid-arranged perforated panels with perforated partitions