Abstract:In this paper, a band stop all-dielectric metamaterial frequency selective surface (FSS) is designed based on effective medium theory and dielectric resonator theory. The FSS is made of high-permittivity ceramics without using any metallic parts. The stop band FSS is composed of 2D arrays of Jerusalem cross-shaped ceramic resonators. Solid-state sintering method is adopted to prepare the high-permittivity ceramics, which is made of 0.7Ba(0.6)Sr(0.4)TiO(3)-0.3La(Mg0.5Ti0.5)O-3. The permittivity of this ceramics is about 110. The simulation results show that the FSS can achieve a stop band at 6.91-9.25 GHz. The relative effective permittivity, permeability and the normalized impedance of the structure are retrieved, showing that the first resonant is a magnetic resonant and the second resonant is an electric resonant. Due to the magnetic and electric resonant, the impedance matching becomes worse, so the normalized impedance is close to 0 and the stop band forms. The electric fields and magnetic fields of the resonant points are observed to further analysis the FSS. At the first resonant point, the electric field loop is formed, equivalent to a magnetic dipole. At the second resonant point, the magnetic field loop is formed, equivalent to an electric dipole. The magnetic and electric fields are accordance with the retrieved parameters. Since such FSSs are made of high-permittivity ceramics, they have potential engineering application in high-power or high-temperature.

Polarization and Angle Insensitive Dual-Band Bandpass Frequency Selective Surface Using All-Dielectric Metamaterials

Single- and Dual-Band High-Order Polarization Rotating Frequency Selective Surface

A Bandpass Frequency Selective Surface With a Low Cross-Polarization Based on Cavities With a Hybrid Boundary

Reconfigurable All-Dielectric Metamaterial Frequency Selective Surface Based on High-Permittivity Ceramics.

Bandpass Frequency Selective Surface with Two Sharp Sidebands Based on Shunted Quarter‐mode Substrate Integrated Waveguide Cavities

A Dual-Polarized Bandpass Frequency Selective Surface With Stable Response

A Dual-Passband Frequency Selective Surface with High Angular Stability and Polarization Insensitivity

A Novel Miniaturized Multiband Strong Coupled-FSS Structure Insensitive to Almost All Angles and All Polarizations

Dual-band Frequency Selective Surface with Quasi-Elliptic Bandpass Response

Design of Dual-Polarized Frequency Selective Structure with Quasi-Elliptic Bandpass Response

Dual-Band Frequency Selective Surface with Different Polarization Selectivity for Wireless Communication Application

Dual-polarization Absorptive/Transmissive Frequency-selective Surface Utilizing Composite Metamaterial

Filtenna-Filtenna Design for Broadband and High-Selectivity Frequency Selective Surface

A Dual-Band Dual-Polarization Frequency Selective Surface with Wide-Range Flexible Band Ratio and Wide Angular Stability

Dual-band and Dual-Polarized Bandpass Frequency Selective Structure

A transmit/reflect switchable frequency selective surface based on all dielectric metamaterials

Investigating the Dual-Passbands Frequency Selective Surface with Complementary Structure

Design of a Dual-Band Dual-Polarization Transparent Frequency Selective Surface

Broad-Band Angle Insensitive Frequency-Selective Surface With Multiple Resonant Modes

Dual-Band High Selective Frequency Selective Surface Design and Analysis

A Dual-Band Frequency Selective Surface With Wide Bandwidths