Abstract:Thin-walled structures are widely used as crucial structural components for energy absorbing applications. To design lightweight thin-walled-involved composite structures with better mechanical performance remains an open issue. In this study, the X-shaped rib-reinforced foam-filled tubes were designed and tested under quasi-static axial compression. Two types of foams, i.e., the aluminum foam and the additively manufactured polylactide (PLA) foam were considered as lightweight fillers. The effects of foam block filling ratio (rib angle) and arrangement of different foam fillers on the axial crushing performance of the diagonally rib-reinforced foam block-filled tube were analyzed. Results indicated that tubes that were diagonally filled with PLA foam blocks possessed better energy absorption capacity, whereas the higher mean crushing strength was achieved by diagonally filling with two aluminum blocks. It also revealed that tubes filled with different foam blocks did not always show advantages over those filled with the same foams. Moreover, the diagonally aluminum foam blocks filled tubes with a large rib angle could induce the global buckling, whereas that with the rib angle of 120 degrees exhibited better mechanical properties in load consistency and specific energy absorption capacity. Numerical simulations were conducted to reveal the energy absorption enhancement mechanism of the tubes filled with varying combinations of the reinforced fillers. Results indicated that the interaction between the foam blocks and the reinforced rib contributed most to the increased energy absorption. Further, an analytical model for evaluating the crushing strength of the developed structure was proposed. The theoretical predictions are in good agreement with the experimental results. The idea of tailoring the fillers arrangement and assembling pattern would promote the development of optimal energy-absorbing thin-walled involved composite structures.

Axial Crush Behavior and Energy Absorption Capability of Foam-Filled GFRP Tubes under Elevated and High Temperatures

Energy-absorption properties of foam-filled composite tubes at elevated temperatures

Axial crush behavior and energy absorption capability of foam-filled GFRP tubes manufactured through vacuum assisted resin infusion process

EXPERIMENTAL RESEARCH ON IMPACT BEHAVIOR OF CONCRETE-FILLED STEEL TUBE AT ELEVATED TEMPERATURES

Axial Impact Behavior of Confined Concrete Filled Square Steel Tubes Using Fiber Reinforced Polymer

Quasi-static Axial Crushing and Transverse Bending of Double Hat Shaped CFRP Tubes

Effect of thermal and hydrothermal aging on the crashworthiness of carbon fiber reinforced plastic composite tubes

On axial crushing behavior of double hat-shaped CFRP and GFRP structures

Numerical simulation of lateral impact resistance of GFRP tube confined foam composite column

Transverse impact response of GFRP tubes filled with MWCNT-reinforced syntactic foam

Mode I Interfacial Fracture Characterization of Foam Core Sandwich Materials at Elevated Temperatures

Crushing responses of carbon/glass hybrid composite tubes under dynamic compressive loads

On-axis and Off-Axis Compressive Behavior of Pultruded GFRP Composites at Elevated Temperatures

Crashworthiness and Failure Analyses of FRP Composite Tubes under Low Velocity Transverse Impact

Axial compressive behavior and energy absorption of syntactic foam-filled GFRP tubes with lattice frame reinforcement

Behavior of Cross Arms Inserted in Concrete-Filled Circular GFRP Tubular Columns

Impact performance and damage assessment of GFRP-RC columns at high temperatures: a numerical insight

Energy-absorbing mechanism and crashworthiness performance of thin-walled tubes diagonally filled with rib-reinforced foam blocks under axial crushing

Crushing responses and energy absorption behaviors of multi-cell CFRP tubes

Improvements in the lateral crushing behavior of syntactic foam‐filled glass fiber reinforced polymer tubes by the addition of straight and helical multiwalled carbon nanotubes

Experimental and Analytical Responses of Hollow and Concrete-Filled Gfrp Tube Columns under Impact