Wear Resistance and Anti-Friction of Expansion Cone with Hard Coating

Wei Songbo,Pei Xiaohan,Shi Bairu,Shao Tianmin,Li Tao,Li Yiliang,Xie Yi

DOI: https://doi.org/10.1016/s1876-3804(16)30038-6

IF: 5.194

2016-01-01

Petroleum Exploration and Development

Abstract:To improve wear resistance of expansion cone and decrease the friction between cone and tube, an expansion cone covered by hard coating was prepared and applied in the field. The carbide-based hard coatings were fabricated on the expansion cone surface by using high-velocity oxygen fuel thermal spraying technology, and the coating improved surface hardness of the cone by nearly 60%. The wear tests indicate that: the hard coating reduces friction coefficient of expansion cone sample by over 30% and wear loss by 33% with lithium grease lubricating; the hard coating reduces friction coefficient of expansion cone sample by about 25% with water lubricating; the hard coating reduces the wear and friction between expansion cone and tube significantly, and extends the cone life. Field tests indicate that: the expansion cones with hard coating have excellent wear resistance; the coating bound well with the expansion cone substrate after application for four wells, and no evident abrasion happens on the cone surface; the cone is successfully applied in the field to repair the damaged casings.