Abstract:The results of two sets of experiments to measure the elastic-plastic behaviour of gold at the nanometre length scale are reported. One set of experiments was on free-standing nanoscale single crystals of gold, and the other was on freestanding nanoscale specimens of open-celled nanoporous gold. Both types of specimens were fabricated from commercially available leaf which was either pure Au or a Au/Ag alloy following by dealloying of the Ag. Mechanical testing specimens of a 'dog-bone' shape were fabricated from the leaf using standard lithographic procedures after the leaf had been glued onto a silicon wafer. The thickness of the gauge portion of the specimens was about 100 nm, the width between 250 nm and 300 nm and the length 7 mu m. The specimens were mechanically loaded with a nanoindenter (MTS) at the approximate midpoint of the gauge length. The resulting force-displacement curve of the single crystal gold was serrated and it was evident that slip localization occurred on individual slip systems; however, the early stages of the plastic deformation occurred in a non-localized manner. The results of detailed finite element analyses of the specimen suggest that the critical resolved shear stress of the gold single crystal was as high as 135 MPa which would lead to a maximum uniaxial stress of about 500 MPa after several per cent strain. The behaviour of the nanoporous gold was substantially different. It exhibited an apparent elastic behaviour until the point where it failed in an apparently brittle manner, although it is assumed that plastic deformation occurred in the ligaments prior to failure. The average elastic stiffness of three specimens was measured to be E-np = 8.8 GPa and the stress at ultimate failure averaged 190 MPa for the three specimens tested. Scaling arguments suggest that the stress in the individual ligaments could approach the theoretical shear strength.

Effects of Interface Dynamics and Layered Structure on Nanoformed Gold Films Investigated Using Molecular Dynamics Simulation

Atomistic dynamics of disconnection-me diate d grain boundary plasticity: A case study of gold nanocrystals

Molecular Dynamics Investigation of the Deformation Mechanism of Gold with Variations in Mold Profiles during Nanoimprinting

Fatigue behaviors and atomic-scale mechanisms in nanocrystalline gold thin film

Dimension-dependent mechanical features of Au-nanocrystalline nanofilms

Effect of Interface Structure on Dislocation Glide Behavior in Nanolaminates

Competitive Effect of Disorder and Defects on Dynamic Structural Transformation of Compressed Gold

Unraveling the effects of interface orientation and crystallography on the deformation mechanisms of accumulative roll-bonded Cu-Nb-multilayered nanocomposites using molecular dynamics

Atomistic investigation of interface-dominated deformation mechanisms in nanolayered Cu–Ag eutectic alloy

Molecular Dynamics Simulation of Nanomachining Process and Mechanical Properties of Nanostructure

Direct Dynamic Atomic Mechanisms of Strain-Induced Grain Rotation in Nanocrystalline, Textured, Columnar-Structured Thin Gold Films

Plastic Deformation in Nanoscale Gold Single Crystals and Open-Celled Nanoporous Gold

Atomistic simulation of plasticity in Cu/Nb metallic nanolayered composites with thick interfaces

Control Synthesis and Numerical Analysis of Gold Nanofilms after Electric-Field-Assisted, One-Step Deposition

Molecular Dynamics Study on the Nanoimprint of Copper

Molecular dynamics simulation study on the effect of crystal orientation on bi-crystal gold nanocrystals in nanoskiving process

Deformation Mechanism of Aluminum, Copper, and Gold in Nanoimprint Lithography Using Molecular Dynamics Simulation

Simulations on nanotribological properties of molecular deposition films

The effect of interface structures on deformation behavior of Cu/Ni multilayer by molecular dynamics

Influence of mechanical compliance of the substrate on the morphology of nanoporous gold thin films

Mechanical Properties of Au Coated Si Nanowafer: an Atomistic Study