Abstract:In the field of aerospace, core components require excellent wear resistance, lubrication and mechanical properties over a wide temperature range. In this study, three groups of CoCrFeNi high-entropy alloy (HEA)-based self-lubricating composites were designed with the addition of Ag, Ni/MoS2 and Cr2O3 using discharge-plasma-sintering technology. Their microstructure, phase composition, mechanical properties, friction and wear properties were analyzed. The results showed that, with the addition of Ag, the hardness and yield stress of HEA-Ni/MoS2-Ag were reduced by 36 HV and 24 MPa, respectively, while the plastic strain was increased by 2%. With the addition of Cr2O3, the hardness (382 HV) and yield stress (430 MPa) of HEA-Ni/MoS2-Ag-Cr2O3 reached their highest values, but the plastic strain reached its lowest value. HEA-Ni/MoS2-Ag-Cr2O3 had the smallest friction coefficient in which the friction coefficient at 800 °C was only 0.42. Additionally, it had a small wear rate of 3.2 × 10−6 mm3/Nm over a wide temperature range. At lower temperatures, Ni/MoS2 and Ag were conducive to lubrication, and the wear resistance was improved by the presence of Cr2O3. At high temperatures, a nickel oxide phase and a variety of silver molybdate phases were formed via a tribochemical reaction, which was vital to the high-temperature tribological properties.

Microstructure, Mechanical and Tribological Properties of the Rapidly Solidified NiAl/Cr(Mo,Dy) Hypoeutectic Alloy

Microstructure and Wear Properties of the Quasi-Rapidly Solidified NiAl/Cr(Mo,Dy) Hypoeutectic Alloy

Microstructure Evolution and Elevated Temperature Compressive Properties of a Rapidly Solidified NiAl–Cr(Nb)/Dy Alloy

Microstructure and Mechanical Properties Determined in Compressive Tests of Quasi-Rapidly Solidified NiAl-Cr(Mo)-Hf Eutectic Alloy after Hot Isostatic Pressure and High Temperature Treatments

Microstructure and Mechanical Properties of Rapidly Solidified NiAl–Cr(Mo) Eutectic Alloy Doped with Trace Dy

High Temperature Wear Behavior of Nial-Cr(Mo)-Ho-Hf Eutectic Alloy

Microstructure, Brittle–ductile Transition Temperature and Elevated Temperature Compressive Behavior of the Directionally Solidified NiAl–Cr(Mo)–Hf Alloy

STUDY ON MICROSTRUCTURE AND ELEVATED TEMPERATURE MECHANICAL PROPERTY OF DIRECTIONALLY SOLIDIFIED NiAl ALLOY Ⅱ. Elevated Temperature Mechanical Property and Interface

Effects of Ni/MoS2, Ag and Cr2O3 on the Microstructure and Mechanical Performance of a CoCrFeNi High-Entropy Alloy over a Wide Temperature Range

Wear Properties of NiAl Based Materials

Microstructure and compressive properties of NiAl–Cr(Mo)–Dy near eutectic alloy prepared by suction casting

Mechanical Properties and Tribological Behavior of Al0.5CoCrFeNb0.5Ni High-Entropy Alloy at High Temperatures

Effects of Ti Addition and Heat Treatment on the Microstructure and Mechanical Properties of NiAl-Cr(Mo) Hypereutectic Alloy

Tensile Properties and Microstructure of DS NiAl—28Cr—5.8Mo—0.2Hf Alloy

Effect of Growth Rate on the Tensile Properties of DS NiAl/Cr(Mo) Eutectic Alloy Produced by Liquid Metal Cooling Technique

Microstructure study of rapidly solidified TiAl-Cr-xNb-Y alloys

Investigations on the Solidification Microstructures and Room Temperature Compression Properties of Nb-doped NiAl-32Cr-6Mo Hypereutectic Alloy

Effects of Hip and Heat Treatment on Microstructure and Compressive Properties of Rapidly Solidified Nial-Cr(Mo)-Hf Eutectic Alloy

Effect of Withdrawal Rate on Microstructure and Mechanical Properties of a Directionally Solidified NiAl-based Hypoeutectic Alloy Doped with Trace Hf and Ho

Microstructure and solidification behaviour of Ni3Al/Ni7Hf2 eutectic alloy

STUDY ON MICROSTRUCTURE AND ELEVATED TEMPERATURE MECHANICAL PROPERTY OF DIRECTIONALLY SOLIDIFIED NiAl ALLOY I. Microstructure and Brittle-to-Ductile Transition Temperature