Abstract:Poly(trimethylene terephthalate)(PTT)/thermoplastic polyester elastomer (TPEE) blends were prepared and their miscibility, crystallization and melting behaviors, phase morphology, dynamic mechanical behavior, rheology behavior, spherulites morphology, and mechanical properties were investigated by differential scanning calorimetry (DSC), scanning electron microscopy (SEM), dynamic mechanical analysis (DMA), parallel-plate rotational rheometry, polarized optical microscopy (POM), wide angle X-ray diffraction (WAXD), universal tensile tester and impact tester, respectively. The results suggested that PTT and TPEE were partially miscible in the amorphous state, the TPEE rich phase was dispersed uniformly in the solid matrix with a size smaller than 2 mu m, and the glass transition temperatures of the blends decreased with increasing TPEE content. The TPEE component had a good effect on toughening the PTT without depressing the tensile strength. The blends had improved melt viscosities for processing. When the blends crystallized from the melt state, the onset crystallization temperature decreased, but they had a faster crystallization rate at low temperatures. All the blends' melts exhibited a predominantly viscous behavior rather than an elastic behavior, but the melt elasticity increased with increasing TPEE content. When the blends crystallized from the melt, the PTT component could form spherulites but their morphology was imperfect with a small size. The blends had larger storage moduli at low temperatures than that of pure PTT.

Crystalline and Thermal Properties in Miscible Blends of Peek, Pps and Pei Obtained by Melt Compounding

Crystallization Behavior of Miscible PA6 and PA6IcoT Blends

Crystallization Behavior of Reactive Blends Between Pbs and Pa6icot

CRYSTALLIZATION AND MELTING BEHAVIOR OF PPS IN THE CRYSTALLINE/CRYSTALLINE BLENDS OF PPS AND PEEK .2. EFFECT OF MELT CONDITIONS ON CRYSTALLIZATION AND MELTING BEHAVIOR OF ANNEALED BLENDS

Thermal, Crystalline, and Tribological Properties of PEEK/PEI/PES Plastics Alloys

Micromorphology and Thermostability of Peek/Pei/Pes Plastics Alloys

Mechanical and Thermal Properties of Poly(phthalazinone biphenyl ether sulfone)/PEEK Blends

Crystallization Kinetics of Compatibilized Blends of Liquid Crystalline Polymer with PEEK

Preparation, Morphology and Properties of Poly(Trimethylene Terephthalate)/Thermoplastic Polyester Elastomer Blends

Crystallization in Blend of Polycaprolactone and High Molecular Weight Polyethylene Oxide

Tailored Morphologies and Properties of High-Performance Microcellular Poly(phenylene Sulfide)/poly(ether Ether Ketone) (PPS/PEEK) Blends

Temperature-Dependent Triple Crystal Polymorphism of Poly(hexamethylene Terephthalate): Long-Range Ordered Mesophase Formation and Crystal Structure–Property Relationships

Thermal Behavior and Phase Behavior in Blends of Liquid Crystalline Poly(aryl Ether Ketone) and Poly(aryl Ether Ether Ketone) Containing Thioether Units

Molecular Aggregation of PEEK with PES Blends and the Block Copolymers Composed of PEEK and PES Components

Blends Of Poly(Aryl Ether Ether Ketone) With Thermotropic Liquid-Crystalline Copolyesters .2. Crystallization Kinetics

Effect of High-Performance Polymers on Crystallization and Multiple Melting Behavior of Poly(Phenylene Sulfide)

Thermal and dynamic mechanical properties of PPESK/PTFE blends

Blends of Poly(ether Ether Ketone) with a Thermotropic Liquid Crystalline Polyester I. the Morphology, Crystallization, and Melting Behavior

CRYSTALLIZATION AND MELTING BEHAVIOR OF POLYPHENYLENE SULFIDE BLENDS WITH POLYAMIDE 6

Crystallization and Melting Behavior of Poly(P-Phenylene Sulfide) in Blends with Poly(Ether Sulfone)

Morphology, Crystallization Kinetics And Melting Behavior Of The Blends Of Poly(Ether Ether Ketone) With Poly(Ether Sulfone With Cardo Side-Group)