Abstract:Structural Health Monitoring, Ahead of Print. Ultrasonic-guided waves full wavefield scanning technology can realize non-destructive testing with non-contact. The damage detection method based on ultrasonic-guided waves' full wavefield data is widely used in thin-walled plate structures. The defect imaging method based on full wavefield data faces the challenge of simultaneously obtaining the defect contour and thickness direction information. Based on the ultrasonic-guided waves full wavefield scanning detection technology, this paper proposes a multi-time Lamb waves space wavenumber imaging method. In this method, the analytic signal of Lamb wavefield at each moment is constructed by Hilbert transform, and the phase unwrapping is carried out by amplitude sorting and multi-clustering method. Then the wavenumber information is obtained by calculating the phase gradient. The wavenumber at different times of each measurement point is arranged in descending order, and the median wavenumber is extracted as the wavenumber at each measurement point. Based on the dispersion relationship of the tested specimen, the quantitative detection of the plate thickness in the detection area is realized. This method is first applied to the simulation model. Then it is applied to the defect imaging and quantitative detection of aluminum plates with rectangular groove defects and carbon fiber reinforced plastics (CFRP) plates with delamination defects. In simulation and experiment, the local wavenumber imaging method, the frequency domain instantaneous wavenumber imaging method, and the multi-time Lamb waves space wavenumber imaging method are used for defect imaging and quantification. The imaging results are compared and analyzed. The result shows that the multi-time Lamb waves space wavenumber imaging method can restore the morphology of groove defects in aluminum plates and delamination defects in CFRP plates, and accurately estimate the depth of groove defects and the location of delamination defects.

Ultrasonic Inspection Of Multiple-Rivet-Hole Lap Joint Cracks Using Global Analysis With Local Finite Element Approach

Scattering of Torsional Flexural Guided Waves from Circular Holes and Crack-Like Defects in Hollow Cylinders

Ultrasonic Inspection Of Localized Defects In Low-Porosity Cfrp

Ultrasonic Full Guided Wavefield for Damage Detection in Curved CFRP Parts

Numerical Study for Surface-breaking Crack Detection on A Cylinder Using Laser-generated Ultrasound

Numerical Study of Length and Angle Gauging for Subsurface-Inclined Cracks Based on Reflected Surface Waves with Laser Ultrasonic Technique

Fatigue-Crack Detection in a Multi-Riveted Strap-Joint Aluminium Aircraft Panel Using Amplitude Characteristics of Diffuse Lamb Wave Field

Crack detection in beam structures with a novel Laplace based Wavelet Finite Element method

Monitoring fatigue cracks in rib-to-deck joints of orthotropic steel deck using ultrasonic Lamb waves

Enhanced sizing for surface cracks in welded tubular joints using ultrasonic phased array and image processing

Multi-time Lamb waves space wavenumber imaging method based on ultrasonic-guided wavefield

Quantitative Detection Method for Surface Angled Cracks Based on Laser Ultrasonic Full-Field Scanning Data

Structural health monitoring of fastener hole using ring-design direct-write piezoelectric ultrasonic transducer

Surface Crack Monitoring by Rayleigh Waves with a Piezoelectric-Polymer-Film Ultrasonic Transducer Array

Modeling Ultrasonic Elastic Waves in Fiber-Metal Laminate Structures in Presence of Sources and Defects

Enhanced Fatigue Crack Detection in Complex Structure with Large Cutout Using Nonlinear Lamb Wave

Approach to lamb wave lateral crack quantification in elastic plate based on reflection and transmission coefficients surfaces

Nondestructive evaluation with fully non-contact air-coupled transducer-scanning laser Doppler vibrometer Lamb wave system

A Comprehensive Multi-Modal NDE Data Fusion Approach for Failure Assessment in Aircraft Lap-Joint Mimics

Micro-Crack Detection Of Nonlinear Lamb Wave Propagation In Three-Dimensional Plates With Mixed-Frequency Excitation

Damage assessment using the Lamb wave factorization method