Abstract:Abstract Conventional manufacturing techniques to fabricate microfluidic chips, such as soft lithography and hot embossing process, have limitations that include difficulty in preparing multiple-layered structures, cost- and labor-consuming fabrication process, and low productivity. Digital light processing (DLP) technology has recently emerged as a cost-efficient microfabrication approach for the 3D printing of microfluidic chips; however, the fabrication resolution for microchannels is still limited to sub-100 microns at best. Here, we developed an innovative DLP printing strategy for high resolution and scalable microchannel fabrication by dosing- and zoning-controlled vat photopolymerization (DZC-VPP). Specifically, we proposed a modified mathematical model to precisely predict the accumulated UV irradiance for resin photopolymerization, thereby providing guidance for the fabrication of microchannels with enhanced resolution. By fine-tuning the printing parameters, including optical irradiance, exposure time, projection region, and step distance, we can precisely tailor the penetration irradiance stemming from the photopolymerization of the neighboring resin layers, thereby preventing channel blockage due to UV overexposure or compromised bonding stability owing to insufficient resin curing. Remarkably, this strategy can allow the preparation of microchannels with cross-sectional dimensions of 20 μm × 20 μm using a commercial printer with a pixel size of 10 μm × 10 μm; this is significantly higher resolution than previous reports. In addition, this method can enable the scalable and biocompatible fabrication of microfluidic drop-maker units that can be used for cell encapsulation. In general, the current DZC-VPP method can enable major advances in precise and scalable microchannel fabrication and represents a significant step forward for widespread applications of microfluidics-based techniques in biomedical fields.

Optimization of 4D Polymer Printing Within a Massively Parallel Flow-Through Photochemical Microreactor

Polymer Pen Chemical Lift-Off Lithography

Efficient 3D Printing Via Photooxidation of Ketocoumarin Based Photopolymerization

Beyond 100 nm Resolution in 3D Laser Lithography: Post Processing Solutions

Ultrafast Digital Printing toward 4D Shape Changing Materials.

Printing Depth Modeling, Printing Process Quantification and Quick-Decision of Printing Parameters in Micro-Vat Polymerization

Droplet-Flow Photopolymerization Aided By Computer: Overcoming The Challenges Of Viscosity And Facilitating The Generation Of Copolymer Libraries

Chemical Optimization Strategy of Rapid Additive Manufacturing via Up‐Conversion Assisted Photopolymerization Based Direct Ink Writing

3D nanoprinting via spatially controlled assembly and polymerization

On‐Tip Photo‐Modulated Molecular Printing

Spatiotemporal Reaction Dynamics Control in Two‐Photon Polymerization for Enhancing Writing Characteristics

Mixed-flow design for microfluidic printing of two-component polymer semiconductor systems

Photoactive Resin Formulations and Composites for Optical 3D and 4D Printing of Functional Materials and Devices

Micro- and Nanofabrication Using Bessel-beam Activated Photopolymerization

4D Printing of Polymers: Techniques, Materials, and Prospects

Customizable and Reconfigurable Surface Properties of Printed Micro‐objects by 3D Direct Laser Writing via Nitroxide Mediated Photopolymerization

Digital light processing 3D printing for microfluidic chips with enhanced resolution via dosing- and zoning-controlled vat photopolymerization

Photoinduced 3D Printing Through a Combination of Cationic and Radical RAFT Polymerization

Electrochemical Polymer Pen Lithography

Lab-on-a-print: from a single polymer film to three-dimensional integrated microfluidics.

Development of High Throughput Photopolymerizations Using Micron‐Sized Ultrathin Metal‐Organic Framework Nanosheets