Abstract:The friction and wear of amorphous diamond-like carbon (DLC) films will dramatically increase with the increment of ambient humidity. This drawback can lead to lubrication failure, which greatly impedes the practical applications of DLC films in humid environment. Herein, a simple method is proposed to improve the tribological performance of DLC films in humid environment by adding hexagonal boron nitride nanosheet wrapped carbon nanoparticles (h-BNNSs) as lubricants. The reciprocating friction tests demonstrate that DLC films with h-BNNSs as lubricants possess excellent antifriction and antiwear performance at the relative humidity (RH) of 7.5–55%. Especially, it can achieve a superlow friction and wear at the RH of 45–55% which decrease by respectively 13 and 25 times as compared to those obtained from DLC films without lubricants. The investigation on the steel ball surface after friction test shows that a protective tribo-layer containing carbon, boron and nitrogen elements is formed. The existence of this tribo-layer can effectively reduce the friction and protect the steel ball surface from excessive wear. Noteworthy, the h-BNNSs are exposed at the friction interface acting as lubricating layer while the carbon nanoparticles are adsorbed on steel ball surface playing as binding binder. Furthermore, the ball movement mode of h-BNNSs and the interaction between water molecules and h-BNNSs are also considered as key factors to reduce friction. All these results indicate that h-BNNSs which can be massively produced have the potential to reduce the friction and wear of DLC films in humid environment.

Effect of Environmental Hydrogen Atoms on the Tribological Behaviors of Diamond-Like Carbon Films

Friction Between Diamond-Like Carbon (DLC) Films—a Molecular Dynamics Study

Effect of relative humidity on the tribological properties of hydrogenated diamond-like carbon films in a nitrogen environment

Tribological Properties of Diamond-Like Carbon Films Deposited by Vacuum Arc

Probing the friction mechanism of diamond-like carbon films in aqueous environments based on molecular dynamics simulations

Superlow friction of amorphous diamond-like carbon films in humid ambient enabled by hexagonal boron nitride nanosheet wrapped carbon nanoparticles

Tribological Behavior of Diamond Like Carbon Film Sliding Against Cocrmo or Al2o3 in Air and Water Environment

Nanostructure of Superlubricating Tribofilm Based on Friction-Induced a-C:H Films under Various Working Conditions: A Review of Solid Lubrication

Electronic insight into ultralow friction in hydrogenated diamond

Effect of Carbon Diffusion on Friction and Wear Behaviors of Diamond-Like Carbon Coating Against Germanium in Boundary Base Oil Lubrication

Combined Effects of Structural Transformation and Hydrogen Passivation on the Frictional Behaviors of Hydrogenated Amorphous Carbon Films

Probing Friction Properties of Hydrogen-Free DLC Films in a Nitrogen Environment Based on ReaxFF Molecular Dynamics

Nanoscale friction of tetrahedral amorphous diamond-like carbon film after thermal annealing

A study of the wear mechanism of diamond-like carbon films

Probing the low friction mechanism of hydrogen-free DLC film in oxygen and nitrogen environments by first-principles calculations and molecular dynamics simulation

Ultra-low Friction of A-C:H Films Enabled by Lubrication of Nanodiamond and Graphene in Ambient Air

Tribological Behavior of Diamond-Like Carbon Film with Different Tribo-Pairs: A Size Effect Study

Role of OH Termination in Mitigating Friction of Diamond-like Carbon under High Load: A Joint Simulation and Experimental Study

Tribological properties of diamond-like carbon films lubricated with water-emulsified engine oil

Tribological Properties and the Current State of Tribological Investigation of Diamond-like Carbon Films

The occurrence of ultralow friction even superlubricity for graphene oxide/hydrogenated diamond-like carbon composites in multi-environments