Abstract:Superhydrophobic surfaces have garnered attention for their ability to decrease fluid resistance, which can significantly reduce energy consumption. This study aims to accurately capture critical flow phenomena in a microchannel and explore the internal drag-reduction mechanism of the flow field. To achieve this, the three-dimensional (3D) superhydrophobic surface flow field with conical microstructure is numerically simulated using the gas–liquid two-phase flow theory and Volume of Fluid (VOF) model, combined with a Semi-implicit method for the pressure-linked equation (SIMPLE) algorithm. The surface drag-reduction effect of the conical microstructure is investigated and compared it to that of the V-longitudinal groove and V-transverse groove surfaces. Additionally, the changes in the drag-reduction effect during the wear of the conical microstructure were explored. The numerical results reveal that the drag-reduction effect improves with a larger period spacing of the conical microstructure, the drag reduction rate can reach 25.23%. As the height of the conical microstructure increases, the aspect ratio (ratio of width to height) decreases, and the dimensionless pressure drop ratio and the drag-reduction ratio increase. When the aspect ratio approaches 1, the drag reduction rate can reach over 28%. indicating a more effective drag-reduction. The microstructure is most effective in reducing drag at the beginning of the wear period but becomes less effective as the wear level increases, when the high wear reaches 10, the drag reduction rate decreases to 3%. Compared to the V-shaped longitudinal groove and V-shaped transverse grooves, the conical microstructure is the most effective in reducing drag.

The Impact of Contact Angle on Flow Resistance Reduction in Hydrophobic Micro Pin Fins

FLOW AND HEAT TRANSFER IN HYDROPHOBIC MICRO PIN FINS WITH DIFFERENT CONTACT ANGLES

Characteristics of Drag Reduction in Different Cross Sections of Hydrophobic Micro Pin Fins

The Flow Resistance and Heat Transfer Characteristics of Micro Pin-Fins with Different Cross-Sectional Shapes

Flow characteristics of water in hydrophobic micro cylinders group with different contact angles

Resistance characteristics of micro pin fins with different cross-section shapes

Effect of Tip Clearance on the Heat Transfer and Pressure Drop Performance in the Micro-Reactor with Micro-Pin–fin Arrays at Low Reynolds Number

Convection heat transfer characteristics of super-hydrophobic micro pin-fins with different cross-sectional shapes

Pressure Drop and Friction Factor of a Rectangular Channel with Staggered Mini Pin Fins of Different Shapes

Effects of Heating Load on Flow Resistance and Convective Heat Transfer in Micro-Pin-Fin Heat Sinks with Different Cross-Section Shapes

Effect of different heating power on flow and convective heat transfer characteristics of triangle micro pin fins

On Interfacial Deformation and Resistance Characteristics over Superhydrophobic Surfaces: A Numerical Study

Convective heat transfer in micro pin fin heat sinks with different cross section shapes under variable heating loads

Experimental and theoretical investigations on the flow resistance reduction and slip flow in super-hydrophobic micro tubes

Numerical Study on Drag Reduction of Superhydrophobic Surfaces with Conical Microstructures in Laminar Flow

Computational Analysis of Rotating Effects on Heat Transfer and Pressure Loss of Turbulent Flow in Detached Pin Fin Arrays with Various Clearances

Flow and Heat Transfer Characteristics of Micro Pin-Fins under Jet Impingement Arrays

Experimental and Numerical Investigation of Hydrothermal Performance of a Microchannel Heat Sink with Pin Fins

Flow Structure and Heat Transfer Characteristics of a Pin-Finned Channel with Upright/curved/inclined Pin Fins under Stationary and Rotating Conditions

Heat Transfer And Pressure Loss Characteristics Of Pin-Fins With Different Shapes In A Wide Channel

Numerical Study on Flow and Heat Transfer Characteristics of Pin-Fins with Different Shapes