Abstract:The boiling flow and heat transfer performance of four different pin-fins in microchannels are investigated through visualization experiment research. Flow boiling visualization results have been conducted by using deionized water as working fluid with circulating under flow rates in the range of 0.25~9kg/h, with the inlet temperature as 30 ℃ and heating power as 126W. The experimental results show that the flow patterns in the channel are mist flow, annular flow, isolated bubble and no bubble. And the flow pattern corresponds to the pressure change. With the increase of Re, the pressure drop in the microchannel first increases rapidly, then decreases, and finally increases again. The change process of pressure drop corresponds to the bubble heat transfer process. The corresponding heat transfer processes include film boiling、transition from film boiling to nucleation boiling、nucleation boiling and single-phase convection. At the same time, the state of bubbles in the channel can correspond to the intensity and mode of heat transfer. The average surface temperature of the bottom plate decreases with the increase of Re. The average convective heat transfer coefficient increases, then decreases and increases again with the increase of Re. The twice increases are mainly due to liquid film evaporation and single-phase flow transition. The average convective heat transfer coefficient increases with the increase of heat flux. And in four different micro-fin shapes, the heat transfer effect of triangle fin array is the best, because the disturbance of triangle to fluid is the most intense. While in the nucleation boiling region, the convective heat transfer coefficient of triangle micro-fin arrays is the largest. At that stage, the bubbles in triangle micro fin array grow and separate more easily.When the Re is less than 130, the number of bubbles in the triangle micro array is great than that in the ellipse micro array, and the bubble departure diameter is the largest, as well. And the bubble growth time and bubble waiting time are the shortest. When Re is greater than 130, the number of bubbles in the channel is relatively small, and the nucleation boiling intensity decreases. When the Re continues to increase, there are few or no bubbles in the channel, which is close to the single-phase convection. Moreover, the pressure drop, bottom temperature and convective heat transfer coefficient of triangle micro fin array change most obviously. The results show that when Re increases from 30 to 125, the bottom temperature decreases by 41 ℃, the maximum convective heat transfer coefficient reaches 16800 w / m2 · ℃, and the maximum Nu is 10.

Experimental Study on Flow Condensation Heat Transfer in a Horizontal Rectangular Channel with Ellipse-shape Pin Fins

Influences of Pin Geometry and Inclination Angle on Condensation Heat Transfer Performance of Elliptical Pin–Fin Surface

Experimental Study on Condensation Heat Transfer of FC-72 in a Narrow Rectangular Channel with Ellipse-Shape Pin Fins: Ground and Microgravity Experiments

Theoretical and Experimental Analyses of Two-Phase Flow Condensation Heat Transfer Inside the Horizontal Micro-Fin Tube

Numerical Study on Heat Transfer Performance of a New-proposed Pin-fin in an Internal Channel

Numerical Investigation of Enhanced Heat Transfer with Micro Pin Fins in Heat Exchangers

Experimental Study of Condensation Heat Transfer of R134a Inside the Micro-Fin Tubes at High Mass Flux

The simulation analysis on the influence of non-closed droplet structure on thermal/ flow performance of pin fin heat sinks

Effect of shape and distribution of pin-fins on the flow and heat transfer characteristics in the rectangular cooling channel

Flow condensation inside a multiport mini channel and a rectangular mini channel with pin fin array

Convective heat transfer of microchannel heat sinks with pinfins and jets for a heat flux up to 500 W/cm 2

Numerical Simulation of Flow and Heat Transfer Characteristics in Non-Closed Ring-Shaped Micro-Pin-Fin Arrays

Experimental study on the effect of shape on the boiling flow and heat transfer characteristics of different pin-fin microchannels

A Review on Application of Pin-Fins in Enhancing Heat Transfer

Experimental Study Of Condensation Flow Inside Horizontal Smooth, Herringbone And Three Enhanced Surface Tubes

Experimental Investigation of Innovative Internal Trailing Edge Cooling Configurations with Pentagonal Arrangement and Elliptic Pin Fin

Numerical Study of the Forced Convective Condensation on a Short Vertical Plate

Experimental Investigation of Condensation in Micro-Fin Tubes of Different Geometries

Shell-Side Flow Condensation Heat Transfer on Three-Dimensional Enhanced Surface

Experimental Investigation and Visualization of Steam Condensation Heat Transfer on Horizontal Conical Surfaces with Microgrooves

Numerical Simulation of Condensation for R410a in Horizontal Round and Flattened Minichannels