Abstract:We present three-dimensional simulations of the image formation of microstructure in near-field optical microscopy with the three-dimensional finite-difference time-domain method (FDTD). First, we calculated the intensity distributions inside and outside and the flux densities for both the tapered and parabolic fiber probes used in near-field optical microscope and nanolithography. The calculating result shows that for different kinds of shape the intensity distributions in both probes are similar and present standing wave forms; but the amplitudes and locations of peaks of the standing waves are different from each other. The intensity outward parabolic probe is higher than that outward tapered probe. Then we computed the intensity distributions of the samples which are composed of different materials by different polarization illumination. Assuming an aperture-type probe in collection-mode near-field microscope, we compare the images produced from the sample composed of three dielectric blocks in nanometer at a distance of 25nm and 150nm, respectively, under constant-high-scanning mode along with the direction of the polarization of the illuminating light, with near-field distribution of the sample without probe. The results show that the probe disturbs the original field distribution of the sample. The received signal is different from the original field distribution of the sample. However the received signal contains high frequency information of the sample in near-field region. Due to probe-sample interaction, parts of evanescent field transform into propagation wave. Only the interaction between the probe and sample in the near field makes possible to probe the high-frequency components and achieve the super-resolution. Therefore, the detected resolution depends on an assembly of the tip size, shape of the tip, distance between tip and sample, relative position and material characteristics of both tip and sample. These results provide the basis for correct interpretation of experimental work.

Study on Near-Field Image Extraction in High Power Lasers

Study of Evaluating Nearfield Beam Quality of the High Power Laser Beams

Near-field analysis of the high-power laser facility using calculated methods and a residual convolutional neural network with attention mechanism

Simulational and Experimental Investigation on the Wavefront Sensing Method Based on Near-Field Profile Acquisition in High Power Lasers

Test and Image Processing of Power Density Distributions for a High Power Laser

High-quality Near-Field Beam Achieved in a High-Power Laser Based on SLM Adaptive Beam-Shaping System

Analysis of the Beam-Pointing Stability in the High Power Laser System

Verification and analysis of stray light in high-power laser system

Image Enhancement and Luminance Analysis of Femtosecond Laser Induced Plasma Spot

THE STUDY ABOUT RELATIONSHIP BETWEEN CO-APERTURE SPLITTING RATIOS AND LASER FAR-FIELD SPOT MORPHOLOGY AND POWER

High-Precision Small-Scale Laser Focal Spot Measurements

Far-field beam quality of high-power unstable resonators TEA CO2 laser

High robustness single-shot wavefront sensing method using a near-field profile image and fully-connected retrieval neural network for a high power laser facility

Study on the near field of semiconductor laser by using scanning near field optical microscope

The Research on Measurement Technology of High Dynamic Range Laser Focal Spot

Accurate Measurement of Laser Intensity Using Photoelectron Interference in Strong-Field Tunneling Ionization.

Study on Laser Parameter Measurement System Based on Cone-Arranged Fibers and CCD Camera

Exact measurement of field divergence of laser beam by using CCD camera

The Design and Experimental Study of the Laser with Peak Power

Detection Methods of Far-field Energy Density of the High Power Pulse Laser

Study on Near-Field Optical Imaging Mechanism