Abstract:For spot scanning dark-field scattering technology, the defocus caused by the change in wafer surface height decreases the defect detection rate and size measurement repeatability. The demand for accurately and rapidly measuring the wafer surface height online is becoming increasingly urgent. The defect detection system integrates scattering, reflection, film, and topography defect detection channels. The integration of laser-triangulation-based defocus measurement into the bright-field optical path is proposed. The laser beam is directed onto the surface of the wafer, and the reflected light is transmitted through a lens onto the photosensitive surface of a four-quadrant detector. This detector captures both the strength and position of the reflected signal simultaneously. In this paper, a triangulation-modified model is established to obtain the height of each inspection spot on the wafer surface through the position signal of the reflected image. When the signal-to-noise ratio of the simulated reflection image position is 20 dB, the signal-to-noise ratio of the height measurement resolved by the triangulation-modified model is 41 dB, and the measurement error is less than 0.2 μm, indicating that the model has a noise suppression effect. The spot-scanning imaging system is established, and the height measurement results of the triangulation measurement model are verified using a laser interferometer. Within the travel range of 69 μm, the system has a measurement accuracy better than ±1 μm and a measurement repeatability better than ±0.2 μm, which meet the measurement requirements of the spot scanning imaging system. The system is utilized for defect detection and defocus measurement of the wafer surface, along with the motion mechanism, to accurately and rapidly obtain the height distribution of the wafer surface.

The Research on Measurement Technology of High Dynamic Range Laser Focal Spot

A High-Precision Laser Displacement Measurement System

High-precision laser alignment technique based on spiral phase plate

An improved schlieren method for measurement and automatic reconstruction of the far-field focal spot

Mathematic Model of Simultaneously Measuring Six-dimensional Parameters by Laser

Research on the Gauge Sensor Laser Spot

A Novel Method To Enhance The Sensitivity For Two-Degrees-Of-Freedom Straightness Measurement

Intelligent Measuring System for Performance Parameters of Laser Range Finder

Laser Spot Center Detection and Comparison Test

Analysis Of Nonlinear Self-Focusing Phenomenon In High-Power Laser System Based On Ray-Tracing

Study on Laser Parameter Measurement System Based on Cone-Arranged Fibers and CCD Camera

Research on dynamic measurement method of speckle in laser display

Application of an Image Fusion Algorithm in Measuring the Laser Beam Far-Field Divergence Angle

Research on laser spot location accuracy of low-power laser diode source applied to high precision laser measurement system

Research on the Design of Kepler Refractive Shaping System with the Long Working Focal Depth

Verification and analysis of stray light in high-power laser system

THE STUDY ABOUT RELATIONSHIP BETWEEN CO-APERTURE SPLITTING RATIOS AND LASER FAR-FIELD SPOT MORPHOLOGY AND POWER

Least-Square-Method-Based Optimal Laser Spots Acquisition and Position in Cooperative Target Measurement

A Novel Wafer Defocus Measurement Method for Spot-Scanning Imaging System Using Laser Triangulation

A Modified Multi-Exposure Fusion Method for Laser Measurement of Specular Surfaces

Research on High-Precision Position Detection Based on a Driven Laser Spot in an Extreme Ultraviolet Light Source