Abstract:Recently, sodium ion batteries (NIBs) gained increasing attention, because of its abundant reserves and relatively even geological distribution. However, the development of NIBs is greatly hampered because of the lack of appropriate active materials for both cathodes and anodes. Since the Na ion is ca. 55% larger than the Li ion, finding suitable host materials with sufficiently large interstitial space to accommodate sodium ions and to allow reversible and rapid ion insertion and extraction is very difficult. NASICON-type Na3V2(PO4)3 has recently been considered as a prospective cathode material for NIBs, because of its highly covalent 3D framework crystalline structure, high energy density (~400 Wh/kg) and good thermal stability. For anode materials, disordered carbon is particularly attractive because of their large interlayer distance and disordered structure that could accommodate sodium ions. Here, we briefly present porous carbon based electrodes for NIBs with excellent rate performance: (1) Carbon-coated nanosized Na3V2(PO4)3 embedded in the porous carbon matrix (abbreviated as CC-NVP@PCM); (2) Nitrogen-doped activated porous carbon fibers (ACFs); (3)Flexible free-standing porous carbon nanofibers (P-CNFs) with three-dimensional (3D) interconnected structure. The CC-NVP@PCM was prepared by using a facile soft-chemistry based method with post heat-treatment. It shows high rate performance (44 mAhg-1at 200C ). This ultrahigh rate performance is comparable to that of supercapacitor, but with much higher energy density. The ACFs were synthesized by pyrolysis of Ppy nanofiber precursor. It shows excellent capacity retention and extraordinary rate performance. The reversible capacity at 0.05 Ag-1 is 296 mAhg-1 and could still maintain as 72 mAg-1 at a current of 10 Ag-1. In case of the P-CNFs electrode prepared by electrospinning, it delivers a reversible capacity of 266 mAh.g-1 after 100 cycles at 0.2C, corresponding to 80.3 % of the initial charge capacity. When cycled at a current density as high as 500 mAg-1 (2C), it still delivers a reversible capacity of ~140 mAh.g-1after 1000 cycles. The improvement of electrochemical performance of these porous carbon based electrodes for NIBs is attributed to the special design and porous structure, which confined a variety of advantages: hierarchical porous channels enabling short transport length for ions and electrons, carbon coated structure resulting in low resistances, good mechanical properties leading to the excellent morphology stability.

Superior Cycle Stability of Nitrogen-Doped Graphene Nanosheets for Na-ion Batteries

Sulfur-/Nitrogen-Rich Albumen Derived "Self-Doping" Graphene for Sodium-Ion Storage.

Rayleigh-Instability-Induced Bismuth Nanorod@Nitrogen-Doped Carbon Nanotubes As A Long Cycling and High Rate Anode for Sodium-Ion Batteries

Design Nitrogen (N) and Sulfur (S) Co-Doped 3D Graphene Network Architectures for High-Performance Sodium Storage.

Capacitive Sodium-Ion Storage Based on Double-Layered Mesoporous Graphene with High Capacity and Charging/Discharging Rate.

Structure engineering and heteroatom doping-enabled high-energy and fast-charging dual-ion batteries

Construction of MoS2-nitrogen-deficient graphitic carbon nitride anode toward high performance Sodium-ions batteries

Enhanced High-Rate Capability and Long Cycle Stability of FeS@NCG Nanofibers for Sodium-Ion Battery Anodes.

High-rate, Ultralong Cycle-Life Lithium/sulfur Batteries Enabled by Nitrogen-Doped Graphene.

Interlayer-expanded MoS2 nanosheets/nitrogen-doped carbon as a high-performance anode for sodium-ion batteries

Nitrogen Doped Γ-Graphyne: A Novel Anode for High-Capacity Rechargeable Alkali-Ion Batteries.

Electrodes for Sodium-Ion Batteries with Excellent Rate Performance Using Porous Carbon Networks

Binding Sulfur-Doped Nb2O5 Hollow Nanospheres on Sulfur-Doped Graphene Networks for Highly Reversible Sodium Storage

3D nitrogen and sulfur equilibrium co-doping hollow carbon nanosheets as Na-ion battery anode with ultralong cycle life and superior rate capability

High nitrogen doped carbon nanofiber aerogels for sodium ion batteries: synergy of vacancy defects to boost sodium ion storage

Oxygen-rich graphene vertically grown on 3D N-Doped carbon foam for high-performance sodium ion batteries

Na(+) intercalation pseudocapacitance in graphene-coupled titanium oxide enabling ultra-fast sodium storage and long-term cycling

Graphene-based nitrogen-doped carbon sandwich nanosheets: a new capacitive process controlled anode material for high-performance sodium-ion batteries

Reversible Na+-extraction/insertion in nitrogen-doped graphene-encapsulated Na3V2(PO4)2F3@C electrode for advanced Na-ion battery

A densely packed Sb 2 O 3 nanosheet-graphene aerogel toward advanced sodium-ion batteries.

Enhanced Electrochemical Performance of NiSbS/NiSb/NiS Nanocomposites Anchored on Graphite Nanosheets for Sodium-Ion Battery Applications