Abstract:Mass spectrometry is widely used analytical technique due to its high specificity for analyte identification as well as its high sensitivity.A custom mass spectrometer instrument based on a cylindrical ion trap (CIT)was built and its working parameters were optimized.An electron ionization(EI)source was chosen for experimental simplic-ity and availability of standard EI spectral libraries.The custom designed CIT was con-sisted of a pair of endcap electrodes and a ring electrode(r0=1 0 mm,z0=8.9 7 mm).A high voltage RF signal which needed to be applied directly to the ring electrode to pro-duce appropriate quadrupole was initially created by an RF generator at low voltage.A power amplifier and a voltage amplifier circuit were used to amplify to an appropriate power level.The boundary ej ection method was used.An electron multiplier,a current amplifier and NI PCIe data acquire card made up the ion detection and data acquisition system.The EI source,CIT and electron multiplier (EM)were mounted in a rail which ensured they were aligned precisely.The software designed in LabVIEW controlled the timing of the whole system.Several MATLAB programs were written to perform post-processing operations on saved MS data files.In order to obtain the optimal working pa-rameters,different values of filament current,bias voltage of EI,background pressure, voltage on the EM detector and mass scan rate were tested in the vacuum chamber.The trends of spectral peak were obtained:1)Signal intensity increased with the heating current supplied to the EI source due to the increased electron emission at higher tem-perature;2)The bias voltage of EI affected the kinetic energy of ions.With the increas-ing of the voltage,the signal intensity increased.When the voltage increased to a cer-tain range,the intensity fluctuated.In most common EI sources,a kinetic energy of 70 V was used.So the bias voltage was set as 70 V;3)Both signal intensity and resolution increased when background pressure was increased from 1×10-4to 6×10-4Pa.When the pressure further increased,the performance decreased;4)Signal intensity was pro-portional to the voltage on the EM detector.Considering the signal intensity and the lifetime of EM,a voltage of 1.75 kV was used;5)Mass scan rate had influence on the signal intensity and resolution.When the scan rate was too fast,the various ions bunched together and increased the signal intensity but reduced the resolution.Slowing the scan rate caused the peaks to spread apart resulting in increased resolution.By using the optimized parameters,several experiments were carried out.The results showed that the mass spectrum was accurate and the resolution was about 300.The MS plat-form performed well which laid a foundation of further research.To further improve resolution,axial RF will be applied to the endcap electrode to perform resonance ej ection in the following work and based on this platform the operation method for high-pressure MS will be explored.

Optimization of Performance of Toroidal Ion Trap with Trianglar Electrode by Theoretical Simulation

Geometric Optimization of Toroidal Ion Trap Based on Electric Field Analysis and SIMION Simulation

Computer Simulations of a New Toroidal-Cylindrical Ion Trap Mass Analyzer

Simulation Study On Linear Ion Trap With Asymmetric Triangular Electrodes

Research on double resonant excitation in a triangular electrode ion trap with asymmetric geometry

Simulation of Unidirectional Ion Ejection in Linear Ion Traps with Asymmetric Radiofrequency Voltage

A novel asymmetrical arc-shaped electrode ion trap for improving the performance of a miniature mass spectrometer.

Novel Linear Ion Trap Mass Analyzer Built with Triangular Electrodes

Investigation of the Effect of an Octopole Electric Field on a Linear Ion Trap and an Asymmetric Semi-Circular Linear Ion Trap Analyzer.

Geometry Optimization of Cylindrical Ion Trap

Simulation of a Miniature Linear Ion Trap with Half-Round Rod Electrodes

Optimization and Simulation of Mems Rectilinear Ion Trap

Optimization of Ion Trap Array Mass Analyzer by Computer Simulation

Theoretical Research on Performance Optimization of PCB Voltage-Divided Ion Trap Mass Analyzer

Novel Linear Ion Trap Mass Analyzer Composed of Four Planar Electrodes

A simple numerical simulation model can elucidate the key factors for designing a miniaturized ion trap mass spectrometer

Geometry Optimization for the Cylindrical Ion Trap: Field Calculations, Simulations and Experiments

Research on Key Techniques of Cylindrical Ion Trap Mass Spectrometer and Parameters Optimization

An Orbital Trap Mass Analyzer Using a Hybrid Magnetic-Electric Field: A Simulation Study

New progresses in the development of miniature ion trap mass spectrometers

Effect of Dodecapole Electric Field on Performance of Linear Ion Trap Mass Analyzer