Abstract:The uniformity of the cell size of aluminum foams prepared by traditional melt foaming and gas injection methods is difficult to control. In order to improve the controllability of cell size and mechanical performance of aluminum foam, an A356 matrix syntactic foam was prepared by the improved stir casting process. Moreover, the compressive property of the syntactic foam was studied and compared with other metal foams. Al2O3 hollow spheres with the diameters of 3-5mm were added in the molten A356 alloy, then the syntactic foam can be obtained after stirring and compaction. The hollow spheres in the syntactic foam are random loose packed. The volume fraction of 3-3.5 mm hollow spheres in the syntactic foam could reach to 56%. The total densities of the syntactic foams are around 1.79 g/cm(3). Through the analysis both in macroscopic and microscopic, the interfacial bonding between aluminum matrix and hollow spheres was proved to be good even after mechanical cutting. The quasi-static compression result showed that the plateau stress of the syntactic foam with 3-3.5mm hollow spheres could reach up to 46 MPa, and the corresponding densification strain energy is 20 MJ/m(3). Moreover, the plateau region is flat, long and relatively high. The syntactic foam with the hollow spheres of 3-4 mm diameter has the highest overall porosity and the best compressive performance. Compared with other traditional aluminum foams, this syntactic foam has advantages in energy absorption performance and the adjustability of cell size.

Ultralight Co/Ag Composite Foams: Synthesis, Morphology and Compressive Property

Compressive Behavior of Lightweight Concrete Using Aerogel-Reinforced Expanded Polystyrene Foams

Extrusion Foaming Of Lightweight Polystyrene Composite Foams With Controllable Cellular Structure For Sound Absorption Application

Highly Sensitive Large Strain Cellulose/multiwalled Carbon Nanotubes (mwcnts)/thermoplastic Polyurethane (TPU) Nanocomposite Foams: from Design to Performance Evaluation

A Novel Method for Synthesizing Ultralight Silver Foams by the Silver Mirror Reaction

Preparation and characterization of light weight aluminum matrix syntactic foams with high energy absorbing capacity

Ultralight and High-Strength Bulk Alumina/zirconia Composite Ceramic Foams Through Direct Foaming Method

Ultrahigh-strength Cellulose Nanofiber Foams Via the Synergy of Freeze-Casting and Solvent Exchange

Preparation and Quasi-Static Compression Properties of Hybrid Aluminum Matrix Syntactic Foam Reinforced with Glass Cenospheres and Silicon Carbide Nanowires

Compressive Behaviour of Open Cell Al–Al2O3 Composite Foams Fabricated by Sintering and Dissolution Process

Compressive Characteristics of Aluminum-Fly Ash Syntactic Foams Processed by Microwave Sintering

Microstructure and compression behavior of cenosphere filled aluminum syntactic foams

Properties and application of cenophere/aluminum composites

Compressive properties of co-continuous hollow glass microsphere/epoxy resin syntactic foams prepared using resin transfer molding

Preparation and Compressive Performance of an A356 Matrix Syntactic Foam

Lightweight epoxy foams prepared with arranged hollow-glass-microspheres/epoxy hollow spheres

Ultralight anisotropic foams from layered aligned carbon nanotube sheets

Preparation and characterization of SiC p/2024Al composite foams by powder metallurgy

Hollow glass microspheres/phenolic syntactic foams with excellent mechanical and thermal insulate performance

Ultrasound and H2O assisted scCO2 foaming technology for preparation of PS/PMMA composite foams with ultra-lightweight and super thermal-insulation

Ultralight cellulose nanofiber based foams: the effects of material formulation and nanofiber type on mechanical properties and thermal insulation