Compensation of the Kerr Effect for Transient Optomechanically Induced Transparency in A Silica Microsphere

Zhen Shen,Chun-Hua Dong,Yuan Chen,Yun-Feng Xiao,Fang-Wen Sun,Guang-Can Guo

DOI: https://doi.org/10.1364/cleo_qels.2016.fm1a.7

2016-01-01

Abstract:We have reported an experimental studied of Kerr effect in silica microspheres and demonstrated compensation of the Kerr effect for transient optomechanically induced transparency (OMIT).

What problem does this paper attempt to address?

Direct Observation of Multimode Interference in Rare-Earth Doped Micro/nanofibers

Bigeng Chen,Qingyang Bao,Limin Tong

DOI: https://doi.org/10.1364/oe.27.026728

IF: 3.8

2019-01-01

Optics Express

Abstract:Modal inspection of optical fibers is important for multimode application but it is challenging to collect in-situ information of propagating modes for evaluation and manipulation. Here we demonstrate direct observation of multimode interference in Er3+/Yb3+ co-doped micro/nanofibers. Luminescent interference patterns are visualized by visible up-conversion of Er3+ ions and are used for establishing the existence of higher order modes co-propagating with fundamental modes. We use fast Fourier transform to analyze the patterns in detail and obtain excellent agreement between experiment and calculation on beat lengths of the interference. Effective index differences among higher order modes and a fundamental mode of a microfiber are also experimentally investigated with the assistance of interference patterns, revealing the characteristic of modal dispersions.
Dynamical behavior of optomechanical induced transparency in a silica microresonator

Chunhua Dong,Zhen Shen,Guangcan Guo

DOI: https://doi.org/10.1364/cleo_at.2014.jw2a.55

2014-01-01

Abstract:In an optomechanical resonator, the optical and mechanical excitations can be coherent converted, which induces a transparency window for a weak probe laser beam. Here, we report an experimental study of transient optomechanical-induced transparency (OMIT) using the silica microcavity with breathing modes. We have also reported experimental studies on both OMIT and light storage under nearly the same conditions also illustrates the connections between these two closely related processes. As straightforward extension of the light storage process is to use a readout pulse that couples to a different optical mode. The resulting readout process enables optical wavelength or optical mode conversion.
Cross-Kerr Effect on an Optomechanical System

Wei Xiong,Da-Yu Jin,Yueyin Qiu,Chi-Hang Lam,J. Q. You

DOI: https://doi.org/10.1103/physreva.93.023844

2016-01-01

Abstract:We study the cross-Kerr (CK) effect on an optomechanical system driven by two-tone fields. We show that in the presence of the CK effect, a bistable behavior of the mean photon number in the cavity becomes more robust against the fluctuations of the frequency detuning between the cavity mode and the control field. The bistability can also be turned into a tristability within the experimentally accessible range of the system parameters. Also, we find that the symmetric profile of the optomechanically induced transparency is broken and the zero-absorption point is shifted in the presence of the CK effect. This shift can be used to measure the strength of the CK effect and the asymmetric absorption profiles can be employed to engineer a high quality factor of the cavity.
Transparency and Tunable Slow-Fast Light in a Hybrid Cavity Optomechanical System.

Qinghong Liao,Weida Bao,Xing Xiao,Wenjie Nie,Yongchun Liu

DOI: https://doi.org/10.1364/oe.382254

IF: 2.7

2021-01-01

Crystals

Abstract:We theoretically investigate the optomechanically induced transparency (OMIT) phenomenon and the fast and slow light effects of a four-mode optomechanical system with the Kerr medium. The optomechanical system is composed of an array of three single-mode cavities and a mechanical oscillator. The three cavities are a passive cavity, a no-loss-gain cavity and a gain optical cavity, respectively. A Kerr medium is inserted in the passive cavity. We study the influence of the Kerr medium on the stability of the optomechanical system, and find that the stable regime of the optomechanical system can be adjusted by changing the Kerr coefficient. We demonstrate that the phenomenon of optomechanically induced transparency will appear when the Kerr medium exists in the optomechanical system and find that the frequency position of the absorption peak on the left increases linearly with the Kerr coefficient. In addition, we also investigate the fast and slow light effects in this system. The results show that we can control the fast and slow light by adjusting the Kerr coefficient, tunneling strength, and driving field strength. This study has potential application prospects in the fields of quantum optical devices and quantum information processing.
Interconversion of Photon-Phonon in a Silica Optomechanical Microresonator

ChunHua Dong,Zhen Shen,ChangLing Zou,GuangCan Guo

DOI: https://doi.org/10.1007/s11433-015-5652-0

2015-01-01

Science China Physics Mechanics and Astronomy

Abstract:In an optomechanical resonator, the optical and mechanical excitations can be coherently converted, which induces a transparency window for a weak probe laser beam. Here, we report an experimental study of transient optomechanically induced transparency(OMIT) using the silica microsphere with the breathing modes. The transient OMIT behavior obtained are in good agreement with theoretical calculations. In addition, the coherent interconversion between optical and mechanical excitations that can be used for light storage and readout has also been studied here. Our experimental results indicate that the light storage is closely related to the process of OMIT, and the photon-phonon conversion can be further applied to optical wavelength or optical mode conversion.
Electromagnetically induced transparency-like effect in a single polydimethylsiloxane-coated silica microtoroid

Yun-Feng Xiao,Lina He,Jiangang Zhu,Lan Yang

DOI: https://doi.org/10.1063/1.3149697

IF: 4

2009-06-08

Applied Physics Letters

Abstract:We study both experimentally and theoretically the coupling between a fiber taper and two whispering-gallery modes, which are simultaneously excited in a single pilydimethyl-siloxane-coated silica microtoroid system. The transmission spectrum of the fiber-coupled two-mode microresonator shows a sharp electromagnetically induced transparency-like window within the resonant absorption region. This line shape results from destructive interference between two optical pathways associated with two distinct coexisting modes in a single resonator. The sharp transparency peak has great potential applications in light modulation and highly sensitive biochemical sensors.

physics, applied
Manipulation of Optomechanically Induced Transparency and Absorption by Indirectly Coupling to an Auxiliary Cavity Mode.

Guo-qing Qin,Hong Yang,Xuan Mao,Jing-wei Wen,Min Wang,Dong Ruan,Gui-lu Long

DOI: https://doi.org/10.1364/oe.381760

IF: 3.8

2020-01-01

Optics Express

Abstract:We theoretically study the optomechanically induced transparency (OMIT) and absorption (OMIA) phenomena in a single microcavity optomechanical system, assisted by an indirectly coupled auxiliary cavity mode. We show that the interference effect between the two optical modes plays an important role and can be used to control the multiple-pathway induced destructive or constructive interference effect. The three-pathway interference could induce an absorption dip within the transparent window in the red sideband driving regime, while we can switch back and forth between OMIT and OMIA with the four-pathway interference. The conversion between the transparency peak and absorption dip can be achieved by tuning the relative amplitude and phase of the multiple light paths interference. Our system proposes a new platform to realize multiple pathways induced transparency and absorption in a single microcavity and a feasible way for realizing all-optical information processing.
Non-reciprocal Light Storage in a Silica Microsphere

Chunhua Dong,Zhen Shen,Changling Zou,Yanlei Zhang,Wei Fu,Guangcan Guo

DOI: https://doi.org/10.1364/cleo_si.2015.stu1i.2

2015-01-01

Abstract:We report an experimental study of Brillouin-scattering-induced transparency (BSIT) in a silica microsphere. Because of the phase-matching requirement, the non-reciprocal light storage based on the BSIT is observed in our experiment.
Optomechanically Tuned Electromagnetically Induced Transparency-Like Effect in Coupled Optical Microcavities

Guanyu Li,Xiaoshun Jiang,Shiyue Hua,Yingchun Qin,Min Xiao

DOI: https://doi.org/10.1063/1.4973194

IF: 4

2016-01-01

Applied Physics Letters

Abstract:We experimentally demonstrate the electromagnetically induced transparency (EIT)-like effect using a double-wheel microcavity coupled with a silica microtoroid cavity. To match the resonant modes of the two microcavities, we shift the resonant wavelength of the double-wheel microcavity by 1.5 nm via the optical gradient force. The EIT-like transmission spectrum is precisely controlled by changing the distance and the frequency detuning between the two coupled microcavities.
Analysis of Interference Effect in Double Optomechanically Induced Transparency System

Shengyan Liu,Zhengkai Han,Deen Li,Chaohua Tan

DOI: https://doi.org/10.3390/photonics11040289

IF: 2.536

2024-03-23

Photonics

Abstract:We propose a scheme to investigate the interference properties of a double optomechanically induced transparency system, which involves two charged nanomechanical resonators, coupled via Coulomb interaction. The results show that the opening of transparency windows is caused by a destructive interference effect only in the weak optical coupling region. For strong optical coupling, normal mode splitting dominates the transparency phenomenon. In the intermediate region, both destructive interference and normal mode splitting contribute to the transparency windows. When the Coulomb coupling is much weaker than the optical coupling, the Coulomb interaction strength linearly determines the distance between the two transparency windows, and has nearly no influence on the destructive interference effect. Otherwise, the system will work in a nonlinear region.

optics
Tuning the peak position of subwavelength silica nanosphere broadband antireflection coatings.

Fei Tao,Pritesh Hiralal,Lianbing Ren,Yong Wang,Qing Dai,Gehan Aj Amaratunga,Hang Zhou

DOI: https://doi.org/10.1186/1556-276X-9-361

2014-01-01

Nanoscale Research Letters

Abstract:Subwavelength nanostructures are considered as promising building blocks for antireflection and light trapping applications. In this study, we demonstrate excellent broadband antireflection effect from thin films of monolayer silica nanospheres with a diameter of 100 nm prepared by Langmuir-Blodgett method on glass substrates. With a single layer of compact silica nanosphere thin film coated on both sides of a glass, we achieved maximum transmittance of 99% at 560 nm. Furthermore, the optical transmission peak of the nanosphere thin films can be tuned over the UV-visible range by changing processing parameters during Langmuir-Blodgett deposition. The tunable optical transmission peaks of the Langmuir-Blodgett films were correlated with deposition parameters such as surface pressure, surfactant concentration, ageing of suspensions and annealing effect. Such peak-tunable broadband antireflection coating has wide applications in diversified industries such as solar cells, windows, displays and lenses.
Loss-induced transparency in optomechanics

H Zhang,F Saif,Y Jiao,H Jing

DOI: https://doi.org/10.1364/OE.26.025199

2018-09-17

Abstract:We study optomechanically induced transparency (OMIT) in a compound system consisting of coupled optical resonators and a mechanical mode, focusing on the unconventional role of loss. We find that optical transparency can emerge at the otherwise strongly absorptive regime in the OMIT spectrum, by using an external nanotip to enhance the optical loss. In particular, loss-induced revival of optical transparency and the associated slow-to-fast light switch can be identified in the vicinity of an exceptional point. These results open up a counterintuitive way to engineer micro-mechanical devices with tunable losses for e.g., coherent optical switch and communications.
Modified transmission spectrum induced by two-mode interference in a single silica microsphere

Chun-Hua Dong,Chang-Ling Zou,Yun-Feng Xiao,Jin-Ming Cui,Zheng-Fu Han,Guang-Can Guo

DOI: https://doi.org/10.1088/0953-4075/42/21/215401

2009-10-26

Abstract:We theoretically and experimentally study the resonant transmission spectrum of light in a fibre taper coupled with a single silica microsphere cavity system, where two whispering-gallery modes (WGMs) are simultaneously excited. By changing the taper position (correspondingly, tuning the resonant frequencies of the two WGMs and modulating their coupling conditions with the fibre taper), a sharp electromagnetically-induced- transparency-like window can be observed in the transmission spectrum. This line shape origins from the taper-mediated interference between two co-existing WGMs in a single microsphere. This measurement result agrees well with the theoretical analysis.

optics,physics, atomic, molecular & chemical
Photothermally and optomechanically induced transparency in a hybrid optomechanical system

Huayin Hu,Fan Gao,Zixiang Guan,Jinzhao Xu,Jianhao Chen,Chunchao Yu,Fang Chen,Boyun Wang,Huafeng Zhang,Lihui Sun

DOI: https://doi.org/10.1002/qua.27356

2024-02-04

International Journal of Quantum Chemistry

Abstract:Abstract We theoretically investigated the photothermally and optomechanically induced transparency (PTIT and OMIT) in an optomechanical system filled with quantum dots (QDs). In our proposed system, the right mechanical resonator couples with the optical cavity via radiation pressure, and the left mechanical resonator couples with the optical cavity through the photothermal effects. The system is driven by a strong pump field and a weak probe field. It is shown that double transparency windows can be observed due to PTIT and OMIT. When considering the Jaynes‐Cummings coupling between the QDs and the optical cavity, three transparency windows are observed. We also show that the PTIT can be adjusted by the OMIT and the QDs in the optical cavity. What is more, the coupling strength and the frequency detuning can be used effectively to change the system absorption and dispersion in the PITT transparency window. This indicates that the group delay of the probe light can also be manipulated by the system parameters. The obtained results may be applied in the optical communication such as optical buffer, and so forth.

chemistry, physical,physics, atomic, molecular & chemical,mathematics, interdisciplinary applications,quantum science & technology
Three-pathway Electromagnetically Induced Transparency in Coupled-Cavity Optomechanical System.

Fu-Chuan Lei,Ming Gao,Chunguang Du,Qing-Li Jing,Gui-Lu Long

DOI: https://doi.org/10.1364/oe.23.011508

IF: 3.8

2015-01-01

Optics Express

Abstract:Recently Qu and Agarwal [Phys. Rev. A 22, 031802 (2013)] found a three-pathway electromagnetically induced absorption (TEIA) phenomenon within a mechanically coupled two-cavity system, where there exist a sharp EIA dip in the broad electromagnetically induced transparency peak in the transmission spectrum. In this work, we study the response of a probe light in a pair of directly coupled microcavities with one mechanical mode. We find that in addition to the sharp TEIA dip within a broad EIT window as found by Qu and Agarwal, three-pathway electromagnetically induced transparency (TEIT) within the broad EIT window could also exist under certain conditions. We give explicit physical explanations and detailed calculations. Our results provide a method for controlling transition between TEIA and TEIT in coupled optomechanical systems, and reveal the multiple pathways interference is versatile for controlling light.
Compensation of Thermal Refraction Effect in High-Q Toroidal Microresonator by Polydimethylsiloxane Coating

L. He,Y-F. Xiao,C. Dong,J. Zhu,V. Gaddam,L. Yang

DOI: https://doi.org/10.1063/1.3030986

IF: 4

2008-01-01

Applied Physics Letters

Abstract:We experimentally and theoretically characterize the thermal refraction effect in a silica microtoroid and demonstrate that such effect can be reduced or even eliminated by applying a thin layer of polydimethylsiloxane (PDMS) to the surface of the silica resonator. By increasing the coating thickness, the whispering gallery modes (WGMs) experience a transition from redshift to blueshift induced by thermal absorption. Experiment results demonstrate that at the thickness of 0.52 μm, the fundamental WGM with observed Q factor of 1.5×106 shows no shift with the input optical power since the thermal refraction of the silica for this mode is compensated completely by the PDMS layer, which has an opposite thermal refraction effect. This work shows that the PDMS layer could be used to reduce thermal noise in high-Q silica microcavities for applications in sensing, lasing, and nonlinear optics.
Controlling Optomechanically Induced Transparency Through Rotation

Sankar Davuluri,Shiyao Zhu

DOI: https://doi.org/10.1209/0295-5075/112/64002

2015-01-01

Europhysics Letters

Abstract:In this article, we describe controlling the optomechanically induced transparency (OMIT) phenomena through rotation. An optomechanical cavity, which is coupled to a weak probe field and to a strong drive field, is placed along the diameter of a rotating table. When the table rotates, the centrifugal force due to rotation changes the length of the optomechanical cavity because of which the transparency window in OMIT disappears. We further point out that OMIT can be recovered by shifting both the drive and probe frequencies simultaneously. We derived an analytic parameter to estimate the minimum angular velocity that can effect OMIT for a given optomechanical cavity. In other words, we describe turning on and turning off OMIT by controlling the rotation rate. Copyright (C) EPLA, 2015
Perfect optomechanically induced transparency in two-cavity optomechanics

Lai-Bin Qian,Xiao-Bo Yan

2023-03-25

Abstract:Here, we study the controllable optical responses in a two-cavity optomechanical system, especially on the $\mathit{perfect}$ optomechanically induced transparency (OMIT) in the model which has never been studied before. The results show that the perfect OMIT can still occur even with a large mechanical damping rate, and at the perfect transparency window the long-lived slow light can be achieved. In addition, we find that the conversion between the perfect OMIT and optomechanically induced absorption can be easily achieved just by adjusting the driving field strength of the second cavity. We believe that the results can be used to control optical transmission in modern optical networks.

Quantum Physics
Brillouin Scattering Induced Transparency and Non-Reciprocal Light Storage

Chun‐Hua Dong,Zhen Shen,Chang‐Ling Zou,Yan-Lei Zhang,Wei Fu,Guang‐Can Guo

DOI: https://doi.org/10.1364/ls.2016.lf2e.1

2016-01-01

Abstract:The Brillouin scattering induced transparency in a high quality optical microresonantor is experimentally demonstrated. Due to the phase matching condition, the circulating acoustic phonon leads to non-reciprocal light storage and retrieval.
All-optically controlled mode-coupling induced transparency with tunable efficiency in a microsphere resonator

Weichen Yuan,Hongyan Fu

DOI: https://doi.org/10.1364/OL.522512

2024-08-01

Abstract:The optical analogs of electromagnetically induced transparency (EIT) have attracted vast attention recently. The generation and manipulation of EIT in microcavities have sparked research in both fundamental physics and photonic applications, including light storage, slow light propagation, and optical communication. In this Letter, the generation and tuning of an all-optically controlled mode-coupling induced transparency (MCIT) are proposed, experimentally demonstrated, and theoretically analyzed. The MCIT effect originated from the intermodal coupling between the plethora of modes generated in our fabricated optical microcavity, and the tuning of the transparency mode utilized the cavity's thermal bistability nature. Furthermore, based on our method, a novel, to the best of our knowledge, controlling of the mode shifting efficiency is also achieved with an increase up to two times and more. The proposed scheme paves a unique, simple, and efficient way to manipulate the induced transparency mode, which can be useful for applications like cavity lasing and thermal sensing.

Compensation of the Kerr Effect for Transient Optomechanically Induced Transparency in A Silica Microsphere

Direct Observation of Multimode Interference in Rare-Earth Doped Micro/nanofibers

Dynamical behavior of optomechanical induced transparency in a silica microresonator

Cross-Kerr Effect on an Optomechanical System

Transparency and Tunable Slow-Fast Light in a Hybrid Cavity Optomechanical System.

Interconversion of Photon-Phonon in a Silica Optomechanical Microresonator

Electromagnetically induced transparency-like effect in a single polydimethylsiloxane-coated silica microtoroid

Manipulation of Optomechanically Induced Transparency and Absorption by Indirectly Coupling to an Auxiliary Cavity Mode.

Non-reciprocal Light Storage in a Silica Microsphere

Optomechanically Tuned Electromagnetically Induced Transparency-Like Effect in Coupled Optical Microcavities

Analysis of Interference Effect in Double Optomechanically Induced Transparency System

Tuning the peak position of subwavelength silica nanosphere broadband antireflection coatings.

Loss-induced transparency in optomechanics

Modified transmission spectrum induced by two-mode interference in a single silica microsphere

Photothermally and optomechanically induced transparency in a hybrid optomechanical system

Three-pathway Electromagnetically Induced Transparency in Coupled-Cavity Optomechanical System.

Compensation of Thermal Refraction Effect in High-Q Toroidal Microresonator by Polydimethylsiloxane Coating

Controlling Optomechanically Induced Transparency Through Rotation

Perfect optomechanically induced transparency in two-cavity optomechanics

Brillouin Scattering Induced Transparency and Non-Reciprocal Light Storage

All-optically controlled mode-coupling induced transparency with tunable efficiency in a microsphere resonator