Abstract:In general, an airship is equipped with hybrid-heterogeneous actuators, aerodynamic control surfaces, the vectored thrusts, and buoyant ballonets; however, moving-mass control is still introduced to a stratospheric airship for its special working condition of low atmospheric density and low airspeed. Thus, the composite control of hybrid. heterogeneous actuators is the primary object in controller design for stratospheric airship. The dynamic equation of airship is derived using the Newton Euler method, and the mechanism of moving-mass control is investigated. The control capabilities between the moving mass and the aerodynamic control surface are compared. The weighted generalized inverse (WGI) is used to design the nonlinear composite controller, where the authority of every actuator can be decided by setting the corresponding value of the control efficiency weighted matrix; thus, the control law is unchanged under different actuator configurations. Using the stratospheric airship as an example, the aerodynamic control surfaces, moving mass, and vectored thrust are combined into the composite control system, and the simulation of altitude tracking is provided. The results of the analysis show that the movements of the moving mass change the pitch and roll angles of the airship such that the passive gliding movement can be realized in the same manner as a glider in water. The moving-mass ratio and the displacement of the moving masses are the primary factors affecting the moving-mass attitude control. The moving-mass attitude motion is unaffected by airspeed; hence, it has a strong adaptability. The WGI achieves a good distribution and reconfiguration among these heterogeneous actuators and maintains the minimum control energy, thereby enhancing the reliability of the control system.

Design Of Composite Control System Based On Mpc For Unmanned Airship

A Model Predictive Control Approach for USV Autonomous Cruising Via Disturbance Learning

Get the design right, the rest is automatic: Towards an adaptive MPC controller

MPC-Based Collaborative Control of Sail and Rudder for Unmanned Sailboat

Collaborative Simulation and Integrated CMAC and PID Optimization and Control of an Aerial Work Platform

Trajectory Tracking Control for Flapping-wing UAV Based on Model-Free Predictive Control

Model Predictive Control Based on State Space and Risk Augmentation for Unmanned Surface Vessel Trajectory Tracking

Gain-Scheduling Model Predictive Control for Unmanned Airship with Lpv System Description

Composite control system of hybrid-driven mid-altitude airship

Robust Fuzzy MPC for Station-keeping of A Multi-vectored Propeller Airship Based on Path Following Method

Hybrid Aerodynamics-Based Model Predictive Control for a Tail-Sitter UAV

Attitude Control System for Quadrotor Using Robust Monte Carlo Model Predictive Control

Composite Control of Stratospheric Airships with Moving Masses

Coaxial Helicopter Attitude Control System Design by Advanced Model Predictive Control under Disturbance

Model Predictive Control for a 3-DOF Flapping-Wing Unmanned Aerial Vehicle with Control Constraints

Comparison of Linear and Nonlinear Model Predictive Control in Path Following of Underactuated Unmanned Surface Vehicles

Model Predictive Collision Avoidance Control for Object Transport of Unmanned Underwater Vehicle-Dual-Manipulator Systems

Autonomous Underwater Vehicle (AUV) Motion Design: Integrated Path Planning and Trajectory Tracking Based on Model Predictive Control (MPC)

LMI-based Saturated Control of a Multi-vectored Propeller Airship

Estimation-Based Model Predictive Control for Automatic Crosswind Stabilization of Hybrid Aerial Vehicles

Model Predictive Control for Trajectory Tracking of Unmanned Aerial Vehicles Using Robot Operating System