Abstract:As one of the advanced manufacturing technologies, high-speed five-axis ball end milling has been widely used in high-end manufacturing fields because of its high efficiency, high quality, and high precision. Based on the analysis of cutting effect and response surface methodology, a series of experiments were carried out. Based on geometric modeling and numerical simulation, various tool postures are comprehensively analyzed, and the down milling process combining positive tilt angle and positive lead angle can achieve better cutting effect. The variance and interaction of the important factors affecting the surface integrity and the cutting process were analyzed, and the polynomial equations reflecting the relationship between the processing index and the input process variable were obtained. Finally, a process optimization schemes with various optimization criteria were proposed. When using a larger tilt, smaller fz and higher spindle rotation speed for multi-objective optimization, a combination of a smaller ap and a smaller ae, or a combination of a larger ap and a smaller ae is advantageous to result in high ideality. The combinations of large lead, large tilt, and high spindle speed give full play to the advantages of high-speed cutting technology. The process optimization plan will help determine the processing strategy for achieving the desired machining results and better surface quality based on actual application requirements. Finally, the future research areas are prospected for the high-performance machining technology.

Cutting Parameters Optimization Based on Cutting Force Spectrum when Ball Milling A880 Gas Turbine Blade Profiles

Machining Parameter Optimization of Milling Process Based on Uniform Design

Modeling of Non-Linear Cutting Forces for Dry Orbital Drilling Process Based on Undeformed Chip Geometry

Pareto Fronts of Machining Parameters for Trade-off among Energy Consumption, Cutting Force and Processing Time

Experimental Study on the Optimization of Ti1023 Milling Parameters

Parameter optimization of ball-end milling cutter with blunt-round edge and micro-texture on flank

A Research of Abrasion Mechanism and Tool Life of R5 Ball Milling Cutter for A880 Stream Turbine High Pressure Rotor Blade Profile Manufacturing

Aero-Engine Blade Cryogenic Cooling Milling Deformation Simulation and Process Parameter Optimization

Cutting Parameters Optimization for Constant Cutting Force in Milling

Optimizing the micro-texture and cutting parameters of ball-end milling cutters to achieve milling stability

Cutting parameter optimization based on force and heat constraint in milling TC4 titanium alloy

Cutting dynamics research on the five-axis machining of thin curved surface with barrel-taper-ball milling cutter

Optimization analysis considering the cutting effects for high-speed five-axis down milling process by employing ball end mill

Study on Groove Optimization Technology Based on the Power Spectrum Analysis

Comprehensive Evaluation Analysis and Optimization Methodology of Tool Geometric Parameters for High Speed Cutting

Study on force-thermal characteristics of ball end milling cutter with chamfered edge and micro-textured flank face

Maximum stable milling area and optimization of cutting parameters

The Dynamic Comprehensive Evaluation of the Importance of Cutting Parameters in the Side Milling TC4 Process Using an Integrated End Mill

Surface integrity optimization for ball-end hard milling of AISI D2 steel based on response surface methodology

Research on Formation Mechanism and Optimization Method of Surface Waviness of TC4 Blisk Blade

Precision and energy-efficient ball-end milling of Ti6Al4V turbine blades using particle swarm optimization