Abstract:Unique spindle microstructures with an apex angle of ∼20° bring the ability of directional water collection to various biosystems (i.e., spider silk and cactus stem). This has great potential to solve the insufficient interfacial wetting for mechanical interlocking formation between polymers and substrates. In this study, the bioinspired spindle microstructures were easily fabricated through the deposition of molten materials by a nanosecond laser with an overlap ratio of 21% between laser spots and achieved superior interfacial wetting for commercial epoxy adhesive on aluminum substrates. Detailed analyses show that there are four mechanisms responsible for the superior interfacial wettability of bioinspired spindle microstructures: the Laplace pressure difference, newly formed aluminum oxide, the capillary effect, and no extra pressure from a trapped atmosphere. Consequently, the bioinspired spindle surface microstructures achieve a maximum improvement of ∼16 and ∼39% in interfacial bonding strength before and after water soak exposure compared to the as-received condition. Moreover, the stable interfacial wettability of bioinspired spindle microstructures ensures that the improved joint strength varied little with an increase in surface roughness from ∼1.7 to ∼12.8 μm. However, the interfacial wettability of common dimple microstructures deteriorated with an increase in surface roughness, which is indicated by the decreasing rule in the quadratic polynomial function of the interfacial bonding strength as the surface roughness increases from ∼2.1 to ∼18.2 μm.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c21857?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c21857</a>.Figures S1–S12, showing various illustrations, surface morphologies, optical images, and interfacial wetting; Tables S1–S3, showing mechanical properties and chemical compositions (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c21857/suppl_file/am0c21857_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Mushroom-Shaped Micropillars for Robust Nonwetting Surface by Electrohydrodynamic Structuring Technique

Microstructured Shape Memory Polymer Surfaces with Reversible Dry Adhesion.

Manufacturing of mushroom-shaped structures and its hydrophobic robustness analysis based on energy minimization approach

Mushroom-Shaped Microfiber Array By Electrohydrodynamic Structuring Process For Superhydrophobicity

Biomimetic mushroom-shaped microfibers for dry adhesives by electrically induced polymer deformation.

Mushroom-Shaped Micropillar With a Maximum Pull-Off Force

Directional rebound of compound droplets on asymmetric self-grown tilted mushroom-like micropillars for anti-bacterial and anti-icing applications

Fabrication of Polymethyl Methacrylate (PMMA) Hydrophilic Surfaces Using Combined Offset-Tool-Servo Flycutting and Hot Embossing Methods

Fabrication of Well-Defined Mushroom-Shaped Structures for Biomimetic Dry Adhesive by Conventional Photolithography and Molding

Tuning Microparticle Porosity During Single Needle Electrospraying Synthesis Via A Non-Solvent-Based Physicochemical Approach

Femtosecond laser-induced shape memory polymer micropillar with tunable wettability and reversible adhesion for underwater oil droplet lossless transfer

Femtosecond Laser Regulated Ultrafast Growth of Mushroom-Like Architecture for Oil Repellency and Manipulation

A Design Strategy for Mushroom-Shaped Microfibrils with Optimized Dry Adhesion: Experiments and Finite Element Analyses

Robust Superhydrophobic Conical Pillars from Syringe Needle Shape to Straight Conical Pillar Shape for Droplet Pancake Bouncing.

Facile Fabrication of Functional PDMS Surfaces with Tunable Wettablity and High Adhesive Force Via Femtosecond Laser Textured Templating

Development of Robust Amphiphobic Hierarchical Structure on Polymer Substrate by Thermal Imprinting and Sputter Etching

Spindle-Shaped Surface Microstructure Inspired by Directional Water Collection Biosystems to Enhance Interfacial Wetting and Bonding Strength

Precise Controlling of Friction and Adhesion on Reprogrammable Shape Memory Micropillars

Effects of Contact Cap Dimension on Dry Adhesion of Bioinspired Mushroom-Shaped Surfaces

A Super Anisotropic Wetting Microstructure Based on Combination of Sharp Edge and Sharp Corner