Abstract:Geometrical distortions during the transfer process limit the adhesion strength of gecko‐inspired adhesives on curved surfaces, especially undevelopable surfaces. A method capable of growing mushroom‐shaped adhesion structures in situ on surfaces with different curvatures is realized by applying a modulated electric field. Mushroom‐shaped adhesive materials fabricated by this method exhibit superior adhesion strength on curved surfaces than all similar structures reported in recent years. Gecko‐inspired adhesives have an extraordinary impact on robotic manipulation and locomotion. However, achieving excellent adhesive performance on curved surfaces, especially undevelopable surfaces, is still challenging. This can be attributed to a considerable difference between the fabrication method and practical necessity, i.e., the adhesive structures are generally fabricated on a flat substrate whereas the manipulating surface is curved, resulting in a low adhesive strength. Here, an in‐situ growth strategy is proposed to fabricate mushroom‐shaped structures at micro/nano‐scale via electrical modulation on flat or curved surfaces. Since the adhesive structures are directly grown on target surfaces without a transfer procedure, they exhibit a large contact area and stress uniformity at the interface, corresponding to an excellent adhesive force. A comparison between grown structures using the proposed method and those fabricated using traditional approaches suggests that the adhesive forces are identical for flat testing surfaces, while the difference can be up to 4 times for developable surfaces and even 25 times for undevelopable surfaces. The proposed adhesion strategy extends the application prospects of gecko‐inspired adhesives from flat surfaces to curved ones, composed of developable and undevelopable surfaces, opening a new avenue to develop gecko‐inspired adhesive‐based devices and systems.

Fabrication of Well-Defined Mushroom-Shaped Structures for Biomimetic Dry Adhesive by Conventional Photolithography and Molding

Bioinspired Adhesive Manufactured by Projection Microstereolithography 3D Printing Technology and Its Application

Microstructured Shape Memory Polymer Surfaces with Reversible Dry Adhesion.

Biomimicking Nano-Micro Binary Polymer Brushes for Smart Cell Orientation and Adhesion Control

Rapid Prototyping of Soft Lithography Masters for Microfluidic Devices Using Dry Film Photoresist in a Non-Cleanroom Setting

Microfabrication of 3D-Polymeric Structures Using Soft Lithography for Tissue Engineering

A facile and low-cost micro fabrication material: flash foam

Switchable Dry Adhesive Based on Shape Memory Polymer with Hemispherical Indenters for Transfer Printing

Laser Direct Writing via Two-Photon Polymerization of 3D Hierarchical Structures with Cells-Antiadhesive Properties

In Situ Growth of Mushroom‐Shaped Adhesive Structures on Flat/Curved Surfaces via Electrical Modulation

Friction Contribution to Bioinspired Mushroom‐Shaped Dry Adhesives

Discretely Supported Dry Adhesive Film Inspired by Biological Bending Behavior for Enhanced Performance on A Rough Surface

A Thermal Actuated Switchable Dry Adhesive with High Reversibility for Transfer Printing

Mushroom-Shaped Micropillar With a Maximum Pull-Off Force

Fast Digital Patterning of Surface Topography Toward Three-Dimensional Shape-Changing Structures

A Photocured Bio-based Shape Memory Thermoplastics for Reversible Wet Adhesion

A simple method for producing freestanding 3D microstructures by integrated photomask micromolding

An easy-coating, versatile, and strong soy flour adhesive via a biomineralized structure combined with a biomimetic brush-like polymer

Maskless Fabrication of Small-Scale Structures Through Controlling Phase Interactions

Femtosecond Laser Regulated Ultrafast Growth of Mushroom-Like Architecture for Oil Repellency and Manipulation