Abstract:A three-phase voltage source converter (VSC) is the most common power electronic device in power systems, but its inherent nonlinearity leads to complex AC-DC harmonic coupling phenomena. Existing studies focus on the harmonic coupling characteristics of three-phase VSCs under three-phase symmetrical conditions, but the problem under asymmetrical conditions is rarely investigated. This paper proposes a practical modeling method for harmonic state space (HSS) modeling of the VSC topology, together with a classic T/4-delay-based decoupled double synchronous reference frame (DDSRF) control system. The steady-state phase shift characteristics of the T/4 delay link for each frequency component are first analyzed, and the expansion method of the DDSRF controller in the HSS frame is derived. Compared with the conventional method, the proposed technique can provide an accurate description of the steady-state effect of the delay link without introducing additional state variables and, therefore, can reduce model complexity and computation burden. Then, the small-signal close-loop HSS model of the VSC is established, and a harmonic transfer matrix between the AC positive sequence/negative sequence and DC current of different frequencies is developed, which reveals the global harmonic coupling relationship between AC and DC grids across the VSC. Analysis shows that the T/4-delay-link significantly weakens the AC-DC inter-harmonic coupling near the fundamental frequency. Finally, the electromagnetic transient simulations are carried out based on MATLAB/Simulink, and the validity of the proposed modeling method and the model and the correctness for the analysis of harmonic coupling characteristics are verified.

Analysis, Measurement, and Compensation of the System Time Delay in A Three-Phase Voltage Source Rectifier

Modeling and Analysis of a Digitally Controlled Grid-Connected Large-Scale Centralized PV System

Fractional-order Time Delay Compensation in Deadbeat Control for Power Converters

Analyses of Static and Dynamic Reactive Power Allocation Between Synchronous Compensators and Shunt Capacitors to Counter Commutation Failures

Analysis and compensation of dead-time effect in voltage source inverters considering parasitic capacitance and ripple current

Impedance Modeling and Analysis of Three-Phase Voltage-Source Converters Viewing from DC Side

A Charging Current Ripple Suppression Strategy for Three-phase Power Conversion System Based on DC-side Harmonic Current Compensation

Dynamic Phasor Model of Line Commutated Converter Under Unbalanced Conditions

MODELING AND DESIGN OF THREE-PHASE INVERTER WITH RECTIFIER LOAD

Modelling and Analysis of Electromagnetic Time Scale Voltage Variation Affected by Power Electronic Interfaced Voltage Regulatory Devices

Research of the dead-time compensation based on the three-phase grid-connected inverter

TCSC CONTROLLER DESIGN IN CONSIDERATION OF TIME DELAY IN WIDE-AREA MEASURING SYSTEM

Overview of Power System Stability Analysis and Wide-area Control in Consideration of Time Delay

A Phase Compensator for SVC Supplementary Control to Eliminate Time Delay by Wide Area Signal Input

Graphical Evaluation of Time-Delay Compensation Techniques for Digitally Controlled Converters

A Regulator Design Method for Three-phase Voltage-source PWM Rectifiers Considering the Non-ideal Characters of the Control System

Analysis and compensation of dead-time effect considering parasitic capacitance and ripple current

Methods for Measuring and Compensating Time Delay of Active Structural Control System

On-line dead-time compensation method for dual three phase induction machine using harmonic sub-space component

Modeling and Analysis on AC-DC Harmonic Coupling of the Three-Phase Voltage Source Converter under Asymmetric Condition

Automeasurement of the Inverter Output Voltage Delay Curve to Compensate for Inverter Nonlinearity in Sensorless Motor Drives