Abstract:Rapid, sensitive and simultaneous determination of trace multi-elements in various plant food samples such as grain, oilseed, vegetable and tea is always a challenge thus far. In this work, a rapid determination method for Se, Cd, As and Pb in food samples by inductively coupled plasma mass spectrometry (ICP-MS) using slurry sampling electrothermal vaporization (SS-ETV) was developed. To improve the analytical sensitivity and precision as well as eliminate the memory effect, a gas turbulator line and signal delay device (SDD) were for the first time designed for the graphite furnace (GF) ETV coupled with ICP-MS. The signal acquisition parameters of ICP-MS, ashing and vaporization conditions, and the flow rates of carrier gas and gas turbulator were investigated for Se, Cd, As and Pb in food samples. Under the optimized conditions, the limits of determination (LODs) for Se, Cd, As and Pb were 0.5 ng g-1, 0.3 ng g-1, 0.3 ng g-1 and 0.6 ng g-1, respectively; the limits of quantification (LOQs) for Se, Cd, As and Pb were 1.7 ng g-1, 1.0 ng g-1, 1.0 ng g-1 and 1.9 ng g-1, respectively; linearity (R2) in the range of 1 to 4,000 ng g-1 was >0.999 using the standard addition method. This method was used to analyze 5 CRMs including rice, tea and soybeans, and the concentrations detected by this method were within the range of the certified values. The recoveries of Se, Cd, As and Pb in plant food matrices including grain, oilseed, celery, spinach, carrot and tea samples were 86-118% compared to the microwave digestion ICP-MS method; and the relative standard deviations (RSDs) were 1.2-8.9% for real food sample analysis, proving a good precision and accuracy for the simultaneous determination of multi-elements. The analysis time was less than 3 min, slurry preparation time < 5 min without sample digestion process. The proposed direct slurry sampling ICP-MS method is thus suitable for rapid and sensitive determination of Se, Cd, As and Pb in food samples with advantages such as simplicity, green and safety, as well as with a promising application potential in detecting more elements to protect food safety and human health.

Direct determination of cadmium in foods by solid sampling electrothermal vaporization inductively coupled plasma mass spectrometry using a tungsten coil trap

Direct Determination of Trace Mercury and Cadmium in Food by Sequential Electrothermal Vaporization Atomic Fluorescence Spectrometry Using Tungsten and Gold Coil Traps

Solid Sampling Graphite Fibre Felt Electrothermal Atomic Fluorescence Spectrometry with Tungsten Coil Atomic Trap for the Determination of Cadmium in Food Samples

Direct Determination of Cadmium in Rice by Solid Sampling Electrothermal Vaporization Atmospheric Pressure Glow Discharge Atomic Emission Spectrometry Using a Tungsten Coil Trap

Rapid and simultaneous detection of cadmium and mercury in foods based on solid sampling integrated electrothermal vaporization technique

Dispersive Liquid–Liquid Microextraction and Micro-Solid Phase Extraction for the Rapid Determination of Metals in Food and Environmental Waters

Determination of Cadmium in Rice and Water by Tungsten Coil Electrothermal Vaporization-Atomic Fluorescence Spectrometry and Tungsten Coil Electrothermal Atomic Absorption Spectrometry after Cloud Point Extraction.

Direct Determination of Cadmium in Wine by Thermospray Flame-heated Nickel Tube Furnace Atomic Absorption Spectrometry

Fast and Sensitive Determination of Cadmium and Selenium in Rice by Direct Sampling Electrothermal Vaporization Inductively Coupled Plasma Mass Spectrometry

Simultaneous Determination Of Trace Elements And Major Elements In Food By Icp-Ms Using Microwave Digestion For Sample Preparation

Rapid and sensitive determination of Se and heavy metals in foods using electrothermal vaporization inductively coupled plasma mass spectrometry with a novel transportation system

Rapid, Simultaneous, and Automatic Determination of Lead and Cadmium in Cereals with a New High Performance Composite Hollow Cathode Lamp Coupled to Graphite Furnace Atomic Absorption Spectrometry

Determination of Cadmium in Environmental and Biological Samples by ID-ICP-MS

Determination of Trace Cadmium in Rice by Liquid Spray Dielectric Barrier Discharge Induced Plasma −chemical Vapor Generation Coupled with Atomic Fluorescence Spectrometry

A new coupling of ionic liquid based-single drop microextraction with tungsten coil electrothermal atomic absorption spectrometry.

Investigation of Dispersive Solid-Phase Extraction Combined with Slurry Sampling Thermospray Flame Furnace Atomic Absorption Spectrometry for the Determination of Cadmium

Simultaneous Determination of Arsenic, Cadmium and Lead in Plant Foods by ICP-MS Combined with Automated Focused Infrared Ashing and Cold Trap

Direct determination of trace elements in austenitic stainless steel samples by ETV-ICPOES

Hollow-fiber Liquid-Phase Microextraction Prior to Low-Temperature Electrothermal Vaporization ICP-MS for Trace Element Analysis in Environmental and Biological Samples.

Direct Determination of Trace Elements in Micro Amounts of Biological Samples Using Electrothermal Vaporization Coupled to Icp-Aes

On-line Preconcentration and Separation of Co, Ni and Cd Via Capillary Microextraction on Ordered Mesoporous Alumina Coating and Determination by Inductively Plasma Mass Spectrometry (ICP-MS).