Abstract:The fatigue cracking of orthotropic steel deck (OSD) has long been a problem of bridge structures. It is meaningful to assess bridge fatigue life using an appropriate method. In this paper, a simplified nodal force structural stress approach aiming at the deck-rib welded joints in OSD is first proposed. The accuracy and mesh sensitivity of the calculation results by the proposed approach are investigated. Then, based on the experimental results of OSD, the effectiveness of the master S-N curve in nonultrahigh cycle fatigue region is verified. The slop and knee point of the S-N curve in ultrahigh cycle fatigue region are analyzed. Finally, an actual bridge model composed of both large-scale shell elements and small-scale solid elements is established. The influences of vehicle axle weight and deck thickness are investigated using the simplified nodal force structural stress approach. The results show that: when the mesh is uniformly divided and the stress does not change obviously along the weld direction, the simplified nodal force approach should be adopted. The proposed approach is simple, accurate, and less sensitive to meshing. It is recommended that 20-node reduced integration elements with a mesh size of 0.25 times the plate thickness should be used to limit the error to less than 1%. In a nonultrahigh cycle region (N <= 5 x 10(6)), the 95% guarantee rate master S-N curve can be used to evaluate the bridge fatigue life. The results of actual bridge analysis based on the Jiangyin Yangtze River Bridge show that under standard vehicles the results calculated by different ultrahigh cycle master S-N curves (N > 5 x 10(6)) are significantly different. The fatigue life increases with the increasing of the slope under the same knee point, but decreases with the increasing of the number of cycles at the knee point under the same slope. When the vehicle is overweight by 50%, the fatigue life is only approximately 10 years. The fatigue life prolongs significantly with the increasing of deck thickness so that it should be at least 14 mm to avoid fatigue failure during the design period.

Fatigue Crack Initiation Prediction of Cope Hole Details in Orthotropic Steel Deck Using the Theory of Critical Distances

Fatigue Behaviour of L-section Stiffener to Crossbeam Joints in Orthotropic Steel Bridge Decks

Numerical Simulation of Fatigue Cracking of Diaphragm Notch in Orthotropic Steel Deck Model

Determination of the Critical Fatigue Crack Length for Orthotropic Steel Decks

FATIGUE TEST STUDY ON ORTHOTROPIC STEEL BRIDGE DECKS WITH OPEN-SHAPED LONGITUDINAL RIBS

XFEM-based Fatigue Crack Propagation Analysis on Key Welded Connections of Orthotropic Steel Bridge Deck

Multiscale and Multifield Coupled Fatigue Crack Initiation and Propagation of Orthotropic Steel Decks

Fatigue strength and crack growth of double-side welded rib-to-deck joint in orthotropic steel decks

Fatigue Test on U-Rib-to-Deck Connections in Orthotropic Steel Bridge Decks

A Novel Method for Characterizing the Fatigue Crack Propagation of Steel Via the Weak Magnetic Effect

Fatigue Reliability Assessment for Orthotropic Steel Decks: Considering Multicrack Coupling Effects

Fatigue Process of Rib-to-deck Welded Joints of Orthotropic Steel Decks

Fatigue behaviour of root crack in stiffener-to-deck plate weld at crossbeam of orthotropic bridge decks

Numerical Simulation of Root-Deck Crack Propagation of Orthotropic Steel Bridge Deck

Fatigue Resistance Analysis of the Orthotropic Steel Deck with Arc-Shaped Stiffener

Stress Analysis of Fatigue Vulnerable Zones in Orthotropic Steel Bridge Decks

A Fatigue Life Prediction Method for Longitudinal Deck Stiffener Nodes in Large Container Vessels

Fatigue Assessment for Deck-Rib Welded Joints of Orthotropic Steel Deck Using a Simplified Nodal Force Structural Stress Approach

Distortion Induced Fatigue of Deck Plate at Rib Intersection with Diaphragm in Orthotropic Steel Deck

Fatigue Life Evaluation for Deck-Rib Welding Details of Orthotropic Steel Deck Integrating Mean Stress Effects

Fatigue Test and Evaluation of U-rib Butt Welds in Orthotropic Steel Decks