Abstract:The evaluation of electromagnetic parasitics is important for electromagnetic interference within power electronics systems. Simple yet accurate physics-based lumped-circuit models of these parasitics can facilitate fast analysis and better understanding of the system performance. Methods exist to reduce complex electromagnetic models to much simpler representations but, while they speed up calculation, they do not preserve physicality. In this paper, a methodology is developed for obtaining a simplified SPICE circuit from a large-scale partial element equivalent circuit (PEEC) model, where there is a clear correlation between geometry and parasitic circuit elements. To preserve correlation between equivalent circuits and physical geometry, reduction is done first for inductance and resistance; then, reduction is performed for capacitance using nodes from the reduced LR model. The reduced model gives a better insight into the causes of and possible solutions to electromagnetic problems and can be used to improve the design. The method was validated on real power electronics geometries using frequency-dependent behavior of port impedances and admittances. The initial PEEC model for this example contained approximately 10 645 unknowns and was reduced to 195 elements. The calculated and measured impedances agree within 0.1 dB up to 200 MHz.

Plane-Pair PEEC Model for Power Distribution Networks with Sub-Meshing Techniques

Plane-Pair PEEC Modeling for Package Power Layer Nets with Inductance Extraction

Investigation of Power Distribution Planes with Multi-Slots Using Plane-pair PEEC Method

Plane-pair PEEC method for impedance analysis of multi-slots power distribution network with experimental validation

Modeling Multilayer Power/ground Planes in Printed Circuit Boards and Electronic Packages Using Microwave Networks

Integral-Equation Equivalent-Circuit Method for Modeling of Noise Coupling in Multilayered Power Distribution Networks

Accurate and efficient computation of power plane pair inductance

The Efficient Equivalent Model for Decoupling Capacitors of Power Distribution Network

In-package P/G Planes Analysis and Optimization Based on Transmission Matrix Method

Efficient, Simulation of Power Distribution Network by Using Integral-Equation and Modal-Decoupling Technology

Efficient Calculation of Near-Field from PDN Using Equivalent Magnetic Current Modal

An Efficient PEEC-Based Method for Full-Wave Analysis of Microstrip Structures

A Novel Combined Equivalent Networks Analysis for Power and Ground Planes with Narrow Slots

'Dog-Bone' Geometry Modeling Based on PEEC for Package PDN

Efficient Modeling of Rerouted Return Currents in Multilayered Power-Ground Planes by Using Integral Equation

Development of Simple Physics-Based Circuit Macromodel from PEEC

Analysis of Multilayer Structure Near- and Far-Field Radiation by the Coupled PP-PEEC and Field-Equivalence Principle Method

Extraction of Equivalent Network of Arbitrarily Shaped Power-Ground Planes with Narrow Slots Using a Novel Integral Equation Method

Emission and Susceptibility Modeling of Finite-Size Power-Ground Planes Using a Hybrid Integral Equation Method

PCB PDN Prelayout Library for Top-Layer Inductance and the Equivalent Model for Decoupling Capacitors

A Novel Approach for System Level Package Modeling to Address Signal and Power Integrity Issues