Abstract:A new dual-bandpass 180° hybrid coupler, based on four properly designed shorted-stub loaded stepped-impedance resonators, is proposed in this paper. In order to construct the collaboratively designed coupler/filter, the resonators are coupled magnetically and electrically with each other through three shorted stubs and an open coupled line, respectively. According to the approach of filter synthesis and the derived design equations, the characteristic admittances and electrical lengths of the resonators and coupling sections are determined to achieve the desired resonant frequencies, external Q factors, and internal coupling coefficients for dual passbands. A design procedure is provided. The design flexibilities for ratios of central frequencies and achievable bandwidths are explored. The component shows both filtering and power dividing functions within two specific passbands, whose good performances are demonstrated by the simulated and measured results. The two second-order passbands of a fabricated prototype are located at 2.42 and 5.84 GHz, with 4.6% and 5.2% bandwidths, respectively. The insertion losses are 1.0 and 1.4 dB over 3-dB power division. The isolations are better than 23.5 and 32.8 dB. In both the in-phase and out-of-phase responses, the in-band amplitude and phase imbalances are always within -1.6-0.6 dB and -6.5°-9.5°, respectively.

Synthesis of Dual-Band Filters with an Arbitrary Load and Asymmetric Responses

Compact dual-band bandpass filter using asymmetrical dual stub-loaded open-loops

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

Substrate Integrated Waveguide Filter with Flat Passband Based on Complex Couplings

Computer Aided Design for Dual-Band Filters with Complex Source and Load Impedances

A Hybrid Method for Flat-Passband Filter with Nonuniform Q Resonators and Predistortion

Iterative Synthesis of Dual-Band Filters with Separately Assignable Operating Bands Using Bandpass Polynomials and Prototypes

Substrate-Integrated Waveguide Bandpass Filters with Planar Resonators for System-on-Package

Synthesis of Wideband Parallel-Coupled Line Bandpass Filters With Non-Equiripple Responses

Advanced Iterative Synthesis of Equiripple Dual-Band Filters With Fully Prescribed Performance

Flexible Iterative Synthesis of Equiripple Filtering Functions

Miniaturized Dual-Band Bandpass Filter Using &#x03bb;/2 Spiral-Resonator and Loaded Open-Stub

Direct Synthesis Method for Dual-Band Bandpass Filters with Wide Fractional Bandwidth Range and Center Frequency Ratio.

Dimensional Synthesis of Symmetric Wideband Waveguide Cross-Coupled Filters Without Global Full-Wave Optimization

Design of Wideband Microstrip Filters with Non-Equiripple Responses and Low Sensitivity

Wideband microstrip bandpass filters with asymmetrically-loaded interdigital coupled lines

Synthesis Design of Dual-Band Filtering Power Dividers Based on E-Shape Resonators

Novel Design of Microstrip Bandpass Filters with a Controllable Dual-Passband Response: Description and Implementation.

Synthesis and Design of Non-Equiripple Filter with Composite Coplanar Waveguide and Slotlines

Dual-Band, Dual-Mode, Microstrip Resonator Loaded, Compact Hybrid SIW Bandpass Filter

DIMENSIONAL SYNTHESIS FOR WIDE-BAND BAND- PASS FILTERS WITH QUARTER-WAVELENGTH RES- ONATORS