Abstract:In this article, rotor designs utilizing assisted-poles are investigated for a high-torque density spoke-type permanent magnet synchronous machine (PMSM) with fractional slot concentrated winding (FSCW) to explore the rich air-gap magnetic field harmonics and torque generation mechanism. Due to their higher average torque output, spoke-type PMSMs with FSCW are increasingly used in high-torque density applications. However, slot harmonics generate torque ripples that are difficult to eliminate in FSCW spoke-type PMSMs. Removing slot harmonics from the stator or winding results in a large drop in torque since their winding factors are identical to those of the main harmonic. Therefore, rotor designs having assisted-poles (symmetrical and asymmetrical) are investigated in this work to mitigate slot harmonics and minimize torque ripples. Firstly, the air-gap flux density is analyzed for the machines having assisted-poles, and a model of interaction between the stator and rotor-MMF harmonics is created and validated through Finite element analysis (FEA) to analyze the torque production mechanism. In addition, an analytical relationship between the assisted-poles' dimensions and the generated torque harmonics is proposed. Furthermore, a generalized torque ripple reduction concept for the FSCW spoke-type PMSM having asymmetrically designed assisted-poles is presented. The proposed design and optimization method are validated through analytical calculations and FEA simulations, and a brief comparative analysis is presented for the analyzed machine prototypes. It has been established that the machine designed by applying the proposed asymmetrical assisted-poles can achieve a reduction in torque ripples while also significantly lowering cogging torque in comparison to the conventional spoke-type PMSMs and other spoke-type PMSMs with rotor having symmetrical assisted-poles.

Reduction of Sub-Harmonic Effect on the Fractional Slot Concentrated Winding Interior PM Machines by Using Spoke-Type Magnets

Influence of Rotor Configuration on Iron and Magnet Losses of Fractional-Slot IPM Machines

Influence of Stator Topologies on Average Torque and Torque Ripple of Fractional-Slot SPM Machines with Fully Closed Slots

Analysis and Reduction of Inherent Shaft Voltage in Interior Permanent Magnet Synchronous Machines

Novel Modular Fractional Slot Permanent Magnet Machines with Redundant Teeth

Investigation of Short Permanent Magnet and Stator Flux Bridge Effects on Cogging Torque Mitigation in FSPM Machines

Comparison of Optimal Design and Performance of PM Machines Having Non-Overlapping Windings and Different Rotor Topologies

Design Consideration of Fractional Slot Concentrated Winding Interior Permanent Magnet Synchronous Motor for EV and HEV Applications

Comparison of radial vibration forces in 10-pole/12-slot fractional slot surface-mounted and interior PM brushless AC machines

Design of in-wheel permanent magnet synchronous motor with concentrated fractional-slot winding and winding switching technology

Design Optimization with Outer Rotor Interior Permanent Magnet Synchronous Motor with Hybird Permanent Magnet

Investigation of Torque and Reduction of Torque Ripples through Assisted-Poles in Low-Speed, High-Torque Density Spoke-Type PMSMs

Design Optimization of Four-Layer Fraction Slot Concentrated Winding Spoke-Type Interior Permanent Magnetic Machine for Range Extender

Design and Analysis of Outer Rotor Permanent-Magnet Vernier Machines with Overhang Structure for In-Wheel Direct-Drive Application

Slot/Pole Number Combination Research of-PM Linear Motors With Fractional Slots per Pole

Fractional Slot Concentrated Winding PMSM With Consequent Pole Rotor for a Low-Speed Direct Drive: Reduction of Rare Earth Permanent Magnet

Design to Reduce Rotor Losses in Fault-Tolerant Permanent-Magnet Machines

No-load iron loss model for a fractional-slot surface-mounted permanent magnet motor based on magnetic field analytical calculation

Winding-MMF-based design and investigation of dual-winding hybrid-tooth vernier permanent magnet motor with reduced torque ripple and improved power factor

Design and Analysis of Interior Permanent Magnet Motor With Magnetic Isolation and Heat Dissipation Integrated Auxiliary Slot

A triple 3-phase fault-tolerant fractional slot concentric winding interior permanent-magnet machine with low space harmonics