Abstract:Poly(vinylidene difluoride) (PVDF) has become the polymer matrix of choice for fabrication of wearable electronics and physiological monitoring devices. Despite possessing a high piezoelectric constant, additives are required to increase the charge transfer from PVDF matrix to connected signal readout units. Many of these additives also stabilize the β-phase of PVDF, which is associated with highest piezoelectric coefficients. However, most of the additives used are often brittle ceramic-phase materials resulting in decreased flexibility of the devices and offsetting the gain in β-phase content. Intrinsically conducting polymers (ICP), on the other hand, are ideal candidates to improve the device-related properties of PVDF, due to their higher flexibility than ceramic fillers as well as ability to form conducting network in PVDF membranes. This work reports the performance and device feasibility of PVDF-polycarbazole (PCZ) electrospun nanofiber membranes. A higher β-phase was observed by FTIR spectroscopy in PVDF/PCZ compared to other PVDF phases. Moreover, a higher open-circuit potential was recorded over PVDF/polyaniline composites, which were studied for comparison. The addition of PCZ reduced the flexibility of pure PVDF nanofibers by 20% only. Besides, the work investigated the bacterial biofouling and cell compatibility of the matrix, as essential properties to examine any putative medical device application. PVDF/PCZ membranes were then used to develop a nanogenerator, which was capable of instantly lighting an entire LED array employing the rectified output power, and charged up a 2.2 μF capacitors using a bridge rectifier through a vertical compressive force applied periodically. Finally, the nanogenerator demonstrated electrical energy harvesting from movements of various parts of the human body, such as toe and heel movement and wrist bending. In conclusion, PCZ can be considered as an attractive, biocompatible, and anti-biofouling conducting polymer for electrical actuation and flexible electronic device applications.

Cardiomyocytes Driven Piezoelectric Nanofiber Generator with Anisotropic Enhancement

In Vitro Cardiomyocyte-Driven Biogenerator Based on Aligned Piezoelectric Nanofibers

Myocardial Cell Pattern on Piezoelectric Nanofiber Mats for Energy Harvesting

Energy harvesting using uniaxially aligned cardiomyocytes

Conformal piezoelectric energy harvesting and storage from motions of the heart, lung, and diaphragm.

Electromechanical Modeling of Energy Harvesting from the Motion of Left Ventricle in Closed Chest Environment

Flexible Fiber-Based Hybrid Nanogenerator for Biomechanical Energy Harvesting and Physiological Monitoring

Multimaterial Printing of Serpentine Microarchitectures with Synergistic Mechanical/Piezoelectric Stimulation for Enhanced Cardiac‐Specific Functional Regeneration

An experimental study on a piezoelectric vibration energy harvester for self-powered cardiac pacemakers

Flexible Nanogenerator from Electrospun PVDF-Polycarbazole Nanofiber Membranes for Human Motion Energy-Harvesting Device Applications

Piezoelectric Nanogenerator Based on Electrospun Cellulose Acetate/Nanocellulose Crystal Composite Membranes for Energy Harvesting Application

Self-powered pacemaker based on all-in-one flexible piezoelectric nanogenerator

High-performance sono-piezoelectric nanocomposites enhanced by interfacial coupling effects for implantable nanogenerators and actuators

Ultra-flexible Piezoelectric Devices Integrated with Heart to Harvest the Biomechanical Energy

Electroactive biomaterials synergizing with electrostimulation for cardiac tissue regeneration and function-monitoring

Hybrid Piezoelectric/Triboelectric Wearable Nanogenerator Based on Stretchable PVDF-PDMS Composite Films

In vivo cardiac power generation enabled by an integrated helical piezoelectric pacemaker lead

Heart Energy Harvesting and Cardiac Bioelectronics: Technologies and Perspectives

In Vivo Self-Powered Wireless Cardiac Monitoring Via Implantable Triboelectric Nanogenerator.

Mesoporous Piezoelectric Polymer Composite Films with Tunable Mechanical Modulus for Harvesting Energy from Liquid Pressure Fluctuation

Direct Powering a Real Cardiac Pacemaker by Natural Energy of a Heartbeat.