Abstract:Three types of all-fiber mode-selection couplers based on fused few-mode fibers (FMFs) are proposed and demonstrated. The specific mode conversions are achieved with appropriate parameters, keeping to the coupling mode theory. LP01 mode is selectively converted into the LP11, LP21, LP02 mode via a 2×2 fused fiber coupler composed of single-mode fiber (SMF) and FMF. By changing the preset parameters in fabrication, mode conversions are also realized between the LP01 and the mixed high order modes. Moreover, conversions from the LP01 mode to other higher order modes are implemented as well in a 3×3 fiber coupler comprising FMF-SMF-FMF structures. Besides, different modes are simultaneously obtained in separated channels to reduce model crosstalk. Distinguished from other techniques, symmetric and asymmetric fused biconical taper are employed in this paper. The 2×2 fiber coupler achieves the conversion from LP01 mode to a single higher order mode such as LP11 or LP21 mode over a broadband spectral range from 1530 nm to 1560 nm. Meanwhile, the mode conversion efficiency exceeding 80% is recorded in experiment, while the insertion loss remains as low as 0.8 dB. Through the comparison with all-fiber mode-selection couplers reported, the relationship between fusion-degree and conversion efficiency is further studied. The experimental results are consistent with the numerical simulations. In addition, the coupler based mode-selection with lower insertion loss and higher conversion efficiency shows potential applications in mode-division multiplexing and sensing systems.

Mode Conversion in a Tapered Fiber Via a Whispering Gallery Mode Resonator and Its Application As Add/drop Filter.

Optimization of Few-Mode-Fiber Based Mode Converter for Mode Division Multiplexing Transmission

Modes Trimming and Clustering in a Weakly Perturbed High‐Q Whispering Gallery Microresonator

An Multi-to-single Mode Conversion Experiment Using the Tapered Fiber

Resonant response and mode conversion of the microsphere coupled with a microfiber coupler

Mode Couplers and Converters Based on Dual-Core Hollow-Core Photonic Bandgap Fiber

Silicon Add-Drop Filter Based on Multimode Grating Assisted Couplers

Cascaded Microbottle Resonator and Its Application in Add–Drop Filter

Design and Experimental Study of Mode Selective All-Fiber Fused Mode Coupler Based on Few Mode Fiber

Highly efficient optical add-drop filter with an angle-polished fiber coupler

Two-Dimensional Tapered Optical Fiber Core for Whispering Gallery Mode Excitation

Polarization-modified Fano Line Shape Spectrum with a Single Whispering Gallery Mode

Broadband Wavelength-Tunable Mode Converter Based on Long-Period Fiber Gratings

A general model for taper coupling of multiple modes of whispering gallery resonators and application to analysis of coupling-induced Fano interference in a single cavity

Low-loss, High-Purity, and Ultrabroadband All-Fiber LP41 Mode Converter Employing a Mode-Selective Photonic Lantern [Invited]

Traveling wave-like Fabry-Perot resonator-based add-drop filters

Mode conversion in graded-index few-mode fiber via hollow cylindrical long-period fiber gratings

Mode conversion in tapered submicron silicon ridge optical waveguides.

Alignment-Free Coupling in Whispering Gallery Mode Resonator Based on a Tapered Capillary

An All-Fiber Mode Converter Assisted by Coiled-Fiber Long-Period Grating

Coupling Whispering-Gallery-Mode Microcavities with Modal Coupling Mechanism