Abstract:The hot deformation behavior of TZM-1.0 wt% ZrO 2 alloy in the temperature range of 1000–1600 °C and strain rate range of 0.005–1 s −1 was studied by hot compression method. The constitutive equation and hot working diagram were established, and the microstructure evolution was emphatically analyzed by SEM and EBSD. The results indicate that the flow stress decreases with the increase of temperature and the decrease of strain rate, and ZrO 2 particles can improve the stability of TZM alloy in rate-control during hot deformation. The constitutive equation accurately predicted the correlation coefficient as high as 0.9685, calculated the average activation energy Q = 426 kJ mol −1 , and obtained the best process parameters of 1150 °C–1250 °C /0.01–0.05 s −1 under 0.7 strain. The unstable zone was mainly composed of a small number of coarse grains and a large number of fine grains. The main reason for flow instability was the disharmonious deformation between coarse and fine grains during compression. The optimum hot working zone consists of more uniform equiaxed grains. However, EBSD observed that at a strain rate of 1 s −1 , the recrystallization fraction at 1600 °C was lower than 1200 °C, and the dynamic recrystallization (DRX) and texture evolution trends at 1200 °C and 1600 °C were completely different. The abnormal changes in recrystallization fraction and texture evolution at 1600 °C were due to the competition between deformed grain growth and DRX on energy storage consumption, and the effect of deformed grain growth on energy storage consumption was greater than that of DRX. At 1600 °C/1 s −1 , the growth of deformed grains was dominant, exhibiting strong texture components in the [001] direction, with〈100〉fibers as the main component and the highest peak texture strength. As the strain rate decreases, DRX dominates and weakens the texture strength, resulting in a significant decrease in fibers.

Temperature Dependence of Micro-Deformation Behavior of the Porous Tungsten/Zr-Based Metallic Glass Composite

Influence of Zrc Content on the Elevated Temperature Tensile Properties of Zrcp/W Composites

The Influence of Crystal Defects on the Elastic Properties of Tungsten Metals

High temperature deformation behaviors of a CuZr-based bulk metallic glass composite

Temperature-dependent deformation behavior of a CuZr-based bulk metallic glass composite

Structural transformation and rheological processes in bulk metallic glass Zr41Ti14Cu12.5Ni10Be22.5

Mechanical Behavior of A Zr-Based Metallic Glass at Elevated Temperature under High Strain Rate

Change in free volume during the homogeneous flow of Zr-based bulk metallic glass matrix composite

Deformation and fracture behavior of tungsten fiber-reinforced bulk metallic glass composite subjected to transverse loading

Homogeneous plastic deformation in a Cu-based bulk amorphous alloy

Anisotropic compressive deformation behaviors of tungsten fiber reinforced Zr-based metallic glass composites

Atomistic Processes of high-temperature plastic deformation of nanoscale body-centered cubic tungsten

Work Toughening Effect in Zr 41 Ti 14 Cu 12.5 Ni 10 Be 22.5 Bulk Metallic Glass

Synthesis and Property of Short Tungsten Fibre/zr-Based Metallic Glass Composite

Temperature Effect on Fracture of a Zr-Based Bulk Metallic Glass

Effect of temperature and strain rate on deformation behavior in metallic glassy films

Improved Tensile Ductility by Severe Plastic Deformation for Nano-Structured Metallic Glass.

Tailoring mechanical heterogeneity, nanoscale creep deformation and optical properties of nanostructured Zr-based metallic glass

Anisotropic tensile properties of tungsten fiber reinforced Zr based metallic glass composites

Deformation behavior and microstructure evolution of TZM alloy with 1.0 wt%ZrO 2 under high temperature compression

Constitutive model for high temperature deformation behavior of Ti–Zr–Ni–Be bulk metallic glass in supercooled liquid region