Abstract:To simulate the non-uniform frost growth in flow direction for humid air flowing through a freezing channel, a 2D numerical frosting model based on dynamic meshes technique is developed in the current work via the secondary development of commercial ANSYS Fluent. The computation domain consists of both frost layer and humid air regions, and the local heat and vapor fluxes at the surface of frost layer are determined by numerical temperature and vapor fraction fields in the humid air region rather than by empirical correlations. The frost layer is treated as a growing packed bed with heat and mass transfer dominated by molecular diffusion, where local absorption coefficient of vapor desublimation and local vapor fraction are both determined by solving the pseudo steady vapor diffusion equation with a source term theoretically. The interface of frost layer and humid air regions is treated as two walls for the iteration of its temperature, of which the humid air side is specified with the temperature equal to the frost-side counterpart and the frost side takes the heat flux including the extra latent heat caused by vapor deposit. User-defined functions are compiled to implement the above treatments to ANSYS Fluent. Frosting experiments in the literature are simulated with the current model for validation. How the profile of frost layer evolves with time in the frosting process is explored. The contours and profiles of velocity, temperature and vapor fraction are presented to discuss the effects of heat and mass transfer on frost formation. Numerical results demonstrate that the proposed CFD model can predict the frost growth and densification with a relative deviation less than 5% compared with experiments. Besides, the computation load of current model is small due to no solution of complex multiphase flow. In addition, dynamic meshes help current model to capture the interface of frost layer and humid air regions accurately.

Phase change mass transfer model for frost growth and densification

Frosting model based on phase change driving force

Analysis of the frost layer growth process based on melting-reconsolidation

Experimental and Numerical Investigations of Frost Formation on Wavy Plates

Numerical Simulations of Frost Growth Using Mixture Model on Surfaces with Different Wettability

A modified CFD model for frosting on a horizontal plate

Prediction of heat and mass transfer inside 3D frost microstructure

Numerical Simulation of Frosting on Wavy Fin-and-tube Heat Exchanger Surfaces

A Semi-Empirical Model for Predicting Frost Properties

Numerical Simulation of Frost Layer Growth on a Horizontal Plate

A CFD Model of Frost Formation Based on Dynamic Meshes Technique Via Secondary Development of ANSYS Fluent

Numerical simulation of frost formation in diffusion limited aggregation

Theoretical Analysis of Interface Transformation During Frost Crystal Growth

A Model of the Defrost Process

Frost model and numerical simulation of air-heating fin-tube vaporizer

Simulation of heat–water–mechanics process in a freezing soil under stepwise freezing

A novel model of heat-water-air-stress coupling in unsaturated frozen soil

Meso-scale mechanical model for mortar deformation under freeze thaw cycles

Frost-Air Interface Characterization Under Natural Convection

Three phase heat and mass transfer model for unsaturated soil freezing process: Part 1 - model development

Numerical Simulation on Frost of Cryogenic Finned-Tube Vaporizer Based on Fractal Theory