Abstract:We report herein a study in which we reveal the role of F− incorporated in the very anodic TiO2 nanotubes prepared electrochemically from a Ti foil using a fluoride based electrolyte. X-ray absorption near edge structure (XANES), resonant X-ray emission spectroscopy (RXES), and X-ray photoelectron spectroscopy (XPS) have been used to examine the as-prepared and the annealed TiO2 nanotubes. It is found that the additional electron resulting from the substitution of O2− by self-doped F− in the TiO2 lattice is localized in the t2g state. Consequently, a localized Ti state can be tracked by a d−d energy loss peak with a constant energy of 1.6 eV in the RXES, in contrast to TiO2 nanostructures where this peak is hardly noticeable when F− is driven out of the lattice upon annealing. ■ INTRODUCTION As one of the solar-driven substrates for photovoltaics, TiO2 and its derivatives have been extensively developed and thoroughly investigated, to harvest their high photocatalytic efficiency, in recent decades. Various efforts have been devoted to the morphology exploration and optimization of TiO2 nanostructures associated with diverse applications. Typically, morphology engineering of TiO2 nanostructures using proper reactants via etching or doping is crucial to obtaining the equilibrium morphology with high surface stability and reactivity. Among them, F− deserves the most credit for the engineering of desired morphology for TiO2 nanostructures, particularly in the preparation of high-aspectratio TiO2 nanotubes (NTs). The use of proper fluoride electrolyte (e.g., HF, NH4F) during Ti anodization can not only form and sustain the nanotubular structure, but also optimize the NT architecture with desired geometry and alignment. The as-prepared TiO2 NTs aligned vertically on the Ti substrate provide not only the unidirectional electrical channel but also a large surface area, making this type of nanostructure a potential candidate for water-splitting, solar cell, and lithium ion battery applications, among many others. However, it appears that, in F-etched TiO2 nanostructures, a significant amount of F− ions is self-doped (trapped) into the as-prepared samples. Although these self-doped F− ions can be driven out via a heating process, they also have a desired effect on the functionality of the as-obtained TiO2 nanomaterials. As a matter of fact, TiO2 doping with fluorine has long been demonstrated both experimentally and theoretically, which results in the introduction of F 2p states and its concomitant Ti states in the band gap of TiO2, leading to the enhanced light absorption of TiO2 toward the visible and thus the increase of photoactivity. As for anodic TiO2 NTs, the amorphous form (as-grown with a large amount of F− ions) is reported to be a promising anode material for both lithium ion and sodium ion batteries, in which the self-doped F− ions and concomitant Ti species might enhance battery performances (e.g., increase charge carrier density and facilitate electron transfer). More interestingly, by applying a sealed annealing procedure, self-doped F− ions play a critical role in amorphousto-anatase phase transformation, in which amorphous TiO2 NTs will be tailored into truncated tetragonal bipyramidal Received: November 23, 2015 Revised: February 10, 2016 Published: February 16, 2016 Article

Tracking the Local Effect of Fluorine Self-Doping in Anodic TiO2 Nanotubes

Lawrence Berkeley National Laboratory Recent Work Title Tracking the Local Effect of Fluorine Self-Doping in Anodic TiO 2 Nanotubes Permalink

Monodisperse FeF2 Nanorods in Ionic Liquid Electrolytes: A Comprehensive Study of the Conversion Mechanism

Morphology Change and Band Gap Narrowing of Hierarchical Tio2 Nanostructures Induced by Fluorine Doping

Effects of F-Doping on the Electrochemical Performance of Na2Ti3O7 as an Anode for Sodium-Ion Batteries

Dense films formed during Ti anodization in NH4F electrolyte: Evidence against the field-assisted dissolution reactions of fluoride ions

Real Role of Fluoride Ions in the Growth of Anodic TiO 2 Nanotubes

First-principles Study on the Electronic and Optical Properties of F- and Nb-doped Anatase TiO2

The role of fluoride and phosphate anions in the formation of anodic titanium dioxide nanotubes

The relationship between the growth rate of anodic TiO 2 nanotubes, the fluoride concentration and the electronic current

Effect of Acid Solution, Fluoride Ions, Anodic Potential and Time on the Microstructure and Electronic Properties of Self-Ordered TiO 2 Nanotube Arrays

Tracking the Effect of Sodium Insertion/Extraction in Amorphous and Anatase TiO<sub>2</sub> Nanotubes

Investigation of Photocatalytic and Low-Emissivity Properties of TiO 2 :F Films Featuring Columnar Structure Prepared on SnO 2 :F Substrate by Sol–gel Method

F-Doped NaTi2(PO4)3/C Nanocomposite As a High-Performance Anode for Sodium-Ion Batteries.

Effects of N and F doping on structure and photocatalytic properties of anatase TiO2 nanoparticles

Electrochemical Preparation and Characterization of Surface-Fluorinated TiO2 Nanoporous Film and Its Enhanced Photoelectrochemical and Photocatalytic Properties

Synthesis Of Fluorine-Doped Alpha-Fe2o3 Nanorods Toward Enhanced Lithium Storage Capability

Nanomechanical and Material Properties of Fluorine-Doped Tin Oxide Thin Films Prepared by Ultrasonic Spray Pyrolysis: Effects of F-Doping

Tracking the E Ff Ect of Sodium Insertion / Extraction in Amorphous and Anatase TiO 2 Nanotubes

Atomic-scale observation of geometric frustration in a fluorine-intercalated infinite layer nickelate superlattice

Fluoride doping Li4Ti5O12 nanosheets as anode materials for enhanced rate performance of lithium-ion batteries