Abstract:Numerical investigations of combined impingement and film cooling based on different turbulence models have been carried out and compared in the present study. The specific test case combines the complex flow physics of the jet impinging, turning and subsequent mixing with hot mainstream, which consists of jet shear layer separation, wall boundary layer transition, coolant jet detachment and reattachment. The turbulence models employed are the k  − standard, RNG, and realizable models, the k − standard, SST, and Transition SST models, and the t l k − k − model. Numerical tests have been performed at three representative blowing ratios from low to high for each turbulence model. The computed cooling effectiveness from  equation models tend to be underpredicted at low blowing ratio while numerical profiles of cooling effectiveness achieve considerable agreement with the measured experiment data at moderate and high blowing ratios. In addition, the computed results from  equation models reasonably match the measured data at low blowing ratio but cooling effectiveness are markedly underpredicted at moderate and high blowing ratios. In contrast, those results from the t l k − k − model agree fairly well with those of the experiment at various blowing ratios. Owing to the nature description of the pre-transitional streamwise fluctuations in the laminar kinetic energy, the solutions from t l k − k − model clearly reveal the complex flow physics in the combined impinging and film cooling in the confined region, where the jet shear layer separation, boundary layer transition, coolant detachment and reattachment co-exist. However, the large number of specified parameters in the t l k − k − model still needs to be further optimized to reach the enhanced agreement with experimental data and obtain extensive applications for combined cooling schemes.

Numerical Analysis of Turbulent Round Jet Impingement Heat Transfer at High Temperature Difference

Numerical Analysis of Entrainment Effects on Impingement Heat Transfer at High Temperature Difference

Numerical Study On Flow And Heat Transfer Characteristics Of Jet Impingement

Numerical Study on Heat Transfer of an Impinging Turbulent Plane Jet with Confined Wall.

Heat Transfer and Flow Characteristics Predictions with a Refined K-Ε-f U Turbulent Model in Impinging Jet

Numerical Study of the Flow and Heat Transfer of a Rectangular-tube Turbulent Impinging Jet Flow

Thin liquid film flow and heat transfer under spray impingement

Numerical Study on Stagnation Point Heat Transfer by Jet Impingement in A Confined Narrow Gap

Numerical Study on Flow and Heat Transfer Characteristics of 3D Turbulent Impinging Jets

Numerical Study on Array Air Jet Heat Transfer Uniformity

Movement of Impingement Heat Transfer by A Single Circular Jet with A Confined Wall

Effect of the Nozzle Geometry on Flow Field and Heat Transfer in Annular Jet Impingement

Numerical Study of Impinging Jets Heat Transfer with Different Nozzle Geometries and Arrangements for a Ground Fast Cooling Simulation Device

Modeling and Computation of Turbulent Slot Jet Impingement Heat Transfer Using RANS Method with Special Emphasis on the Developed SST Turbulence Model

Heat Transfer and Flow Characteristics of the Jet Array Impingement

NUMERICAL INVESTIGATION OF DIFFERENT TURBULENCE MODELS APPLIED IN COMBINED IMPINGEMENT AND FILM COOLING

A developed transition simulation model for turbulent plane jet impingement heat transfer

Numerical Study of Flow and Heat Transfer of Impingement Cooling on Model of Turbine Blade Leading Edge

The Heat Transfer and Coherent Structures of the Tangential Impingement Jets in the Annular Chamber Studied with Extended Proper Orthogonal Decomposition

Modelling Of Impinging Flow And Heat Transfer In A Confined Narrow Gap

Experimental Investigation of Local and Average Heat Transfer Coefficients under an Inline Impinging Jet Array, Including Jets with Low Impingement Distance and Inclined Angle