Abstract:As there is a small amount of deformation in the center during the rolling process of ultra-heavy plates, it is extremely easy to cause poor mechanical properties in the center. Increasing the deformation in the center is the most feasible method to eliminate the deformation effects in the cross-section of ultra-heavy plates. In this study, the gradient temperature rolling (GTR) process is compared with the traditional uniform temperature rolling (UTR) process. It is found that the GTR process can significantly increase the deformation in the center and thereby refine the grains.. The room temperature tensile test and instrumented Charpy impact test are used to test the strength at room temperature and impact energy at low temperature. Combined with the obtained impact load/energy displacement curve, the deformation and damage process under impact load are analyzed. The microstructure morphology and impact fracture obtained by different rolling processes in the center are analyzed by experimental methods such as OM, SEM, EBSD, etc. The prior austenite grain (PAG) boundary morphology is analyzed and the densities of grain boundaries are statistically quantified. The results showed that the strength, plasticity, and low-temperature toughness of the GTR process are improved compared to the UTR process, with increased dislocation density in the center microstructure, the density of PAG boundaries, and the density of packet boundaries. The size of the PAG in the center is refined by ~49%, the density of PAG boundaries increased by ~140%, the density of high-angle packet boundaries increased by ~39%, and the density of low-angle packet boundaries increased by ~49%. The crack propagation in the instrumented Charpy impact test of the GTR process showed stable expansion, indicating a ductile fracture compared to the semi-brittle fracture of the UTR process. The densities of PAG boundaries and high-angle packet boundaries are the most important factors affecting the strength and low-temperature toughness.

Proactive regulation of axial crushing behavior of thin-walled circular tube by gradient grooves

Experimental and numerical study of circular, stainless thin tube energy absorber under axial impact by a control rod

Axial crushing and energy absorption of graded hierarchical hexagonal tubes

Quasi-static Axial Crushing and Transverse Bending of Double Hat Shaped CFRP Tubes

Crashworthiness of double-gradient hierarchical multi-cell hexagonal tubes under multi-load impacts

On the crashworthiness of novel right-angle fractal gradient hierarchical multi-cell bi-tubular tubes under axial loading

Enhancing Energy Absorption of Circular Tubes under Oblique Loads Through Introducing Grooves of Non-Uniform Depths

Energy absorption characteristics of corrugated hexagonal gradient hierarchical tube

Dynamic Buckling Analyses of Functionally Graded Carbon Nanotubes Reinforced Composite (FG-CNTRC) Cylindrical Shell under Axial Power-Law Time-Varying Displacement Load

Crushing analysis of square gradient hierarchical multicellular tubes

Crushing Behavior on the Cylindrical Tube Based on Lotus Leaf Vein Branched Structure

Design and Optimization of Equal Gradient Thin-Walled Tube: Bionic Application of Antler Osteon

Combination of Taper and Hierarchy to Improve Crushing Efficiency of Thin-Walled Tubes

Effect of a Gradient Temperature Rolling Process on the Microstructure and Mechanical Properties of the Center of Ultra-Heavy Plates

Axial crushing behaviors of buckling induced triangular tubular structures

Theoretical Analysis on the Collapse of Dumbbell-Shaped Tubes

On the Fracture Possibility of Thin-Walled Tubes under Axial Crushing

Effects of displacement amplitude and normal force on fretting wear behavior of zirconium alloy tube in simulated primary water of PWR

Axial Crushing of Triangular Tubes

Quasi-static crushing behaviors and plastic analysis of thin-walled triangular tubes

Crashworthiness design of functionally graded structures with variable diameters