Microwave-assisted Facile Synthesis of Yellow Fluorescent Carbon Dots from O-Phenylenediamine for Cell Imaging and Sensitive Detection of Fe3+ and H2O2

Li Song,Yanyan Cui,Chunfang Zhang,Zhongbo Hu,Xiangfeng Liu

DOI: https://doi.org/10.1039/c6ra02554d

IF: 4.036

2016-01-01

RSC Advances

Abstract:CDs synthesized from o-phenylenediamine through microwave-assisted method show great potential for Fe3+ and H2O2 detection as well as cell imaging.

What problem does this paper attempt to address?

Microwave-assisted Synthesis of N,P-doped Carbon Dots for Fluorescent Cell Imaging

Hua Li,Fang-Qi Shao,Si-Yuan Zou,Qi-Jing Yang,Hong Huang,Jiu-Ju Feng,Ai-Jun Wang

DOI: https://doi.org/10.1007/s00604-015-1714-2

2015-01-01

Mikrochimica Acta

Abstract:Nitrogen and phosphorus co-doped carbon dots (N,P-C-dots) were prepared by microwave-assisted thermolysis of N-phosphonomethyl aminodiacetic acid and ethylenediamine. N,P-C-dots exhibit bright blue fluorescence with an emission maximum at 418 nm. Experimental results show that they have uniform dispersion with the average size of 3.3 nm, a fluorescence decay time of 7.8 ns, a quantum yield of 17.5 %, low toxicity, and good stability. All these make them an excellent choice as a fluorescent nanomaterial for use in cellular imaging.
Microwave-assisted Hydrothermal Synthesis of Carbon Dots Based on Tyrosine and Their Application in Ion Detection and Bioimaging

Huang He,Li Chunguang,Shi Zhan,Feng Shouhua

DOI: https://doi.org/10.7503/cjcu20190076

2019-01-01

Abstract:Cabon dots(CDs) were synthesized utilizing tyrosine as carbon source, ethanediamine as passivant through a green microwave-assisted hydrothermal way. The size of CDs can be adjusted by the dose of ethane-diamine. The as-prepared CDs have uniform size and good dispersibility, showing blue or green fluorescence. The as-prepared CDs can change their fluorescence(from blue to yellow) by changing the excitation light and the emission light can be kept without large decay. The as-synthesized CDs have good selectivity on the detection of Fe3+ with a limit of detection(LOD) of 0.82 nmol/L, and a detection limit of 2.98 nmol/L. The as-synthesized CDs also have great biocompatibility and low biotoxicity, and can be utilized as a probe to label AD293 cells, marking the cytoplasm of the cells.
Microwave synthesis of chitosan-based carbon dots for Al3+ detection and biological application

Ke Jian,Liming Fu,Yujie Zhang,Hongmei Zhang,Xiangjun Guo,Xihui Zhao

DOI: https://doi.org/10.1016/j.ijbiomac.2024.129413

Abstract:Yellow fluorescent carbon dots (Y-CDs) were prepared via microwave method using chitosan and o-phenylenediamine as the main raw materials. The obtained Y-CDs possesses good water solubility, excellent biocompatibility and luminous stability. During the microwave pyrolysis carbonization process, the surface of Y-CDs was modified with the functional groups such as amino and carboxyl, which can bind to Al3+ by forming complexes, further improving the selectivity and sensitivity of the Al3+ detection. And the fluorescence of Y-CDs was quenched by Al3+ by static quenching process. More importantly, Y-CDs as fluorescent sensor was further applied for the determination of Al3+ in the real water samples with high reliability and accuracy. In addition, Y-CDs present potential application in biological imaging. The cultivated zebrafish embryos with Y-CDs displayed clearly in vivo uptake and metabolic fluorescence images, further confirming its low toxicity and excellent biocompatibility.
Microwave-assisted synthesis of wavelength-tunable photoluminescent carbon nanodots and their potential applications.

Hongying Liu,Zhimei He,Li-Ping Jiang,Jun-Jie Zhu

DOI: https://doi.org/10.1021/am508994w

IF: 9.5

2015-01-01

ACS Applied Materials & Interfaces

Abstract:A facile and rapid strategy was developed for the synthesis of ultrabright luminescent carbon nanodots (CDs) with tunable wavelength from 464 to 556 nm by introducing glutaraldehyde into the precursor solution under microwave irradiation. The fluorescence properties, including excitation and emission wavelength, quantum yield, and size of the CDs, were adjusted by changing the amount of glutaraldehyde and poly(ethylenimine). Several methods such as high-resolution transmission electron microscopy, X-ray photoelectron spectroscopy, and dynamic light scattering, UV-vis, fluorescence, and Fourier transform infrared spectroscopy were employed to study the morphology and the properties of CDs. The luminescence mechanism was also discussed. In addition, confocal microscopy imaging revealed that the as-prepared CDs could be used as effective fluorescent probes in the cell imaging without obvious cytotoxicity. Moreover, a novel sensor for the detection of Co(2+) was proposed on the basis of Co(2+)-induced fluorescence quenching. These superior properties demonstrated the potential application of the CDs in cellular imaging and ion sensing.
Ultra-fast microwave-assisted synthesis of photoluminescent carbon dots with an ultra-high quantum yield for H2O2 detection

Xiaoyu Zhao,Mengyuan Zhang,Zhenghua Zhang

DOI: https://doi.org/10.1016/j.jece.2022.109008

IF: 7.7

2022-01-01

Journal of Environmental Chemical Engineering

Abstract:The conventional hydrothermal bottom-up synthesis for preparing carbon dots (CDs) usually requires stringent conditions and high energy consumption, whereas the quantum yield (QY) of CDs remains at a relatively low level. Herein, CDs exhibiting strong blue photoluminescence (PL) with an ultra-high QY (up to 94.4%) were prepared via a simple one-step microwave-assisted route using citric acid (CA) and o-phenylenediamine (o-PD) as precursors. The operating conditions, including reaction time, solvent species, amount of solvent, and precursor molar ratio, were optimized. The CDs synthesized within 3.5 min of microwave heating in ethylene glycol (EG) at a CA-to-PD molar ratio of 5:1 exhibited the highest QY (94.4%). A synergistic PL mechanism of the molecule state and carbon core state emissive centers was proposed according to the characterization results of CDs. Moreover, the proof-to-concept H2O2 fluorescent detection performances of the prepared CDs confirmed their great application potential as probe materials. Through directly mixing the CD products and H2O2, a strong PL response could be rapidly detected after merely 1 min, and the detection limit was calculated to be as low as 8.6 nM. Besides, the CDs exhibited high biocompatibility, making them suitable for in-vivo detection of H2O2. Therefore, this work provides a novel and efficient approach for synthesis of ultra-high QY CDs that can be directly applied in biological detection.
One-pot Microwave-assisted Synthesis of Passivated Fluorescent Carbon Dots for Fe(III) Detection

Xu Yuan,Chen Yanhua,Ding Lan

DOI: https://doi.org/10.7503/cjcu20180031

2018-01-01

Abstract:Carbon dots (CDs) were synthesized through one-pot microwave-assisted synthesis method using citric acid as carbon source, glycerol as solvent and passivation agent. The obtained CDs have uniform size and good dispersion. The proposed synthesis method is rapid, simple and eco-friendly. The CDs were applied to detecting Fe3+ in practical water samples based on fluorescence(FL) quenching mechanism with a linear range of 5-50 mu mol/L, a detection limit of 2.16 mu mol/L and the recoveries of 96.8%-106.0%, which showed good feasibility in detection of Fe3+ in practical water samples.
Rapid Solid-Phase Microwave Synthesis of Highly Photoluminescent Nitrogen-Doped Carbon Dots for Fe(3+) Detection and Cellular Bioimaging.

Guili He,Minghan Xu,Mengjun Shu,Xiaolin Li,Zhi Yang,Liling Zhang,Yanjie Su,Nantao Hu,Yafei Zhang

DOI: https://doi.org/10.1088/0957-4484/27/39/395706

IF: 3.5

2016-01-01

Nanotechnology

Abstract:Recently, carbon dots (CDs) have been playing an increasingly important role in industrial production and biomedical field because of their excellent properties. As such, finding an efficient method to quickly synthesize a large scale of relatively high purity CDs is of great interest. Herein, a facile and novel microwave method has been applied to prepare nitrogen doped CDs (N-doped CDs) within 8 min using L-glutamic acid as the sole reaction precursor in the solid phase condition. The as-prepared N-doped CDs with an average size of 1.64 nm are well dispersed in aqueous solution. The photoluminescence of N-doped CDs is pH-sensitive and excitation-dependent. The N-doped CDs show a strong blue fluorescence with relatively high fluorescent quantum yield of 41.2%, which remains stable even under high ionic strength. Since the surface is rich in oxygen-containing functional groups, N-doped CDs can be applied to selectively detect Fe3+ with the limit of detection of 10(-5) M. In addition, they are also used for cellular bioimaging because of their high fluorescent intensity and nearly zero cytotoxicity. The solid-phase microwave method seems to be an effective strategy to rapidly obtain high quality N-doped CDs and expands their applications in ion detection and cellular bioimaging.
Yellow-Emissive Carbon Dot-Based Optical Sensing Platforms: Cell Imaging and Analytical Applications for Biocatalytic Reactions.

Hongxia Li,Xu Yan,Shanpeng Qiao,Geyu Lu,Xingguang Su

DOI: https://doi.org/10.1021/acsami.7b17619

IF: 9.5

2018-01-01

ACS Applied Materials & Interfaces

Abstract:Carbon dots (CDs) have attracted increasing interest in bioimaging and sensing recently. Herein, we present a simple synthetic strategy to prepare yellow-emissive CDs (λem = 535 nm) by one-pot hydrothermal treatment of p-phenylenediamine and aspartic acid. The as-prepared CDs possess outstanding optical features, excellent biocompatibility, and low cytotoxicity, especially for fluorescence (FL) cellular imaging. Interestingly, by combining the quenching and recognition ability of silver nanoparticles (AgNPs) with the optical capacity of CDs, a label-free strategy for specifically monitoring H2O2-generated biocatalytic processes was proposed, such as glucose oxidase-induced conversion of glucose, cholesterol oxidase-catalyzed oxidization of cholesterol, and bienzyme of acetylcholinesterase and choline oxidase-mediated reaction of acetylcholine. In this process, AgNPs act as a "nanoquencher" to decrease the FL intensity of CDs via surface plasmon-enhanced energy-transfer mechanism. The enzymatic oxidation product (H2O2) subsequently etches the AgNPs to silver ions, thus recovering the FL of CDs, which enabled this proposed nanosensor to sensitively detect H2O2-generated biocatalytic processes. The above results pave the way to implement CDs as FL labels for biosensors and biological imaging.
Large-Scale Synthesis of Tunable Fluorescent Carbon Dots Powder for Light-Emitting Diodes and Fingerprint Identification

Lei Zhao,Dong Zhang,Xin Wang,Yang Li,Zihan Li,Hua Wei,Boxuan Yao,Gongtao Ding,Zifan Wang

DOI: https://doi.org/10.3390/molecules28155917

IF: 4.6

2023-08-08

Molecules

Abstract:The emergence and fast development of carbon dots (CDs) provide an unprecedented opportunity for applications in the field of photoelectricity, but their practicability still suffers from complicated synthesis procedures and the substrate dependence of solid-state fluorescence. In this study, we design a unique microwave-assisted solid-phase synthesis route for preparing tunable fluorescent CD powders with yellow, orange, and red fluorescence (Y-CDs, O-CDs, R-CDs) by simply adjusting the mass ratio of reactants, a method which is suitable for the large-scale synthesis of CDs. The Y-/O-/R-CDs were systematically characterized using physics and spectroscopy techniques. Based on the perfect solid-state fluorescence performance of the proposed fluorescent CD powders, the Y-/O-/R-CDs were successfully applied for the construction of multi-color and white light-emitting diode devices at low cost. Furthermore, the Y-CDs displayed much higher yield and luminous efficiency than the O-CDs and R-CDs and were further used for fingerprint identification on the surfaces of glass sheets and tinfoil. In addition, the R-CD aqueous solution fluorescence is sensitive to pH, suggesting its use as a pH indicator for monitoring intracellular pH fluctuations. The proposed series of fluorescent powders composed of CDs may herald a new era in the application of optical components and criminal investigation fields.

chemistry, multidisciplinary,biochemistry & molecular biology
Yellow Carbon Dots for Fluorescent Water Sensing, Relative Humidity Sensing, and Anticounterfeiting Applications.

Yafeng Deng,Shaoyun Huang,Jinli Li,Yihua Zhou,Jun Qian

DOI: https://doi.org/10.1007/s10895-023-03214-2

2023-01-01

Journal of Fluorescence

Abstract:Most fluorescent probes based on carbon dots (CDs) fluorescence color or intensity change are still used for detection in solution, but in practical fluorescence detection applications, detection in the solid state is necessary. Therefore, a CDs-based fluorescence sensing device is designed in this paper, which can be used for water detection in liquid and solid states. Using oPD as a single precursor, yellow fluorescent CDs (y-CDs) were prepared by hydrothermal method, which can be used in the field of water detection and anti-counterfeiting by using its solvent-sensitive properties. First, y-CDs can be used to visually and intelligently detect the water content in ethanol. Secondly, it can be used to detect the Relative Humidity (RH) of the environment by combining it with cellulose to form a fluorescent film. Finally, y-CDs can also be used as a fluorescent material for fluorescence anti-counterfeiting.
Microwave-Synthesized Narrow Emitting Carbon Dots and Their Tunable Fluorescence for Sensing Application

Xiao-Lan Wei,Qin-Lin Shi,Lan Jiang,Yu Qin,Qin-Ling Shi

DOI: https://doi.org/10.1039/d3nj02694a

IF: 3.3

2023-07-21

New Journal of Chemistry

Abstract:Fluorescent carbon dots (CDs) with narrow emissions have been mostly prepared under high temperatures and high pressures, besides long reaction times and tedious purification processes, which greatly limits their large-scale production. In contrast, the microwave-assisted solvothermal method can produce CDs simply and rapidly, but often results in wide-emissive CDs with full widths at half maximum (FWHM) larger than 80 nm. In this study, the microwave synthesis of CDs was improved by using ethylene glycol as the solvent and sodium thiosulfate as the oxidant. Consequently, narrow emissive CDs with FWHM of only 35 nm were obtained from phloroglucinol, which were purified by a simple precipitation using a mixed solvent of ethanol and dichloromethane. The structural characterizations of the obtained CDs reveal that the sulfur element could be doped in the carbon structure with the addition of thiosulfate. It was also demonstrated that the photoluminescent efficiency of the CDs is greatly determined by their carbon core structures and edge groups. In addition, the fluorescence of CDs could be tuned significantly from the blue to the green by changing the dispersing solvent. Accordingly, the prepared CDs were successfully applied for the sensing of water content in organic solvents.

chemistry, multidisciplinary
Facile Preparation of Cu-doped Carbon Dots for Naked-Eye Discrimination of Phenylenediamine Isomers and Highly Sensitive Ratiometric Fluorescent Detection of H2O2.

Dandan Zhao,Yijun Huang,Huixiang Ouyang,Bingfang Shi,Suping Li,Shengyu Chen,Shulin Zhao

DOI: https://doi.org/10.1016/j.talanta.2021.123110

IF: 6.1

2021-01-01

Talanta

Abstract:Changing a detection analyte into a colored material is a key challenge for visual discrimination of isomers. In this work, a novel fluorescent probe incorporating Cu-doped carbon dots (Cu-CDs), for the first time, was developed for naked-eye discrimination of phenylenediamine isomers and highly sensitive ratiometric fluorescence detection of H2O2. In this strategy, Cu-CDs were synthesized by a facile hydrothermal approach using citric acid, formamide, and CuCl2 as reactants. The prepared Cu-CDs exhibited outstanding peroxidase-like activity and stability. Consequently, a chemosensor platform based on Cu-CDs was constructed to enable naked-eye discrimination of phenylenediamine isomers through the H2O2-mediated oxidation reaction. Moreover, a Cu CDs-based ratiometric fluorescence sensor was proposed as a means to sensitively detect H2O2 with a detection limit of 5.0 nM. The sensor was further employed for monitoring H2O2 in human serum, indicating its potential applications in other biologically related study.
Green Synthesis of Fluorescent Carbon Dots from Ascorbic Acid and Their Application in Sensing and Biological Imaging

Xiao-Hua Hu,Xueqin An

DOI: https://doi.org/10.1016/j.nxmate.2024.100226

2024-01-01

Next Materials

Abstract:A simple, highly efficient, and environmentally friendly one-step method has been developed to synthesize fluorescent carbon dots (CDs) with the assistance of hydrogen peroxide (H2O2). Here H2O2 acts as a green accelerator to promote the preparation of CDs, while temperature plays a critical role in controlling the entire synthesis process. The prepared CDs demonstrate monodispersion, with an average diameter of ∼6.8 nm, superior stability, and excitation-dependent photoluminescent (PL) behavior. The PL mechanism of the CDs was investigated using time-resolved PL decay, revealing that the PL originates from both the defect state and the intrinsic state of the CDs. Furthermore, the CDs show significant promise as pH sensors and versatile nanothermometry devices, owing to their remarkable sensitivity to both pH and temperature, as demonstrated by the pronounced dependence of their steady-state fluorescence emission spectra. It’s worth noting that temperature and pH sensors present significant reversibility, sensitivity, and linearity. More importantly, the CDs display low cytotoxicity, good biocompatibility, and the ability to enter human breast cancer Bcap-37 cells, making them highly suitable candidates for cellular imaging and labeling.
Microwave-assisted Fabrication of Multicolor Photoluminescent Carbon Dots As a Ratiometric Fluorescence Sensor for Iron Ions

Zhongqi Sun,Zhaoyu Yang,Li Zhao,Yuheng Zhang,Yongqi Li,Juan Hou,Lan Ding

DOI: https://doi.org/10.1039/c8nj05324c

IF: 3.3

2019-01-01

New Journal of Chemistry

Abstract:Multicolor CDs were prepared by a microwave-assisted method and used as a ratiometric fluorescence sensor for the detection of iron ions.
Facile Synthesis of Yellow Emissive Carbon Dots with High Quantum Yield and Their Application in Construction of Fluorescence-Labeled Shape Memory Nanocomposite

Pei Yang,Ziqi Zhu,Xinghui Li,Tao Zhang,Wei Zhang,Minzhi Chen,Xiaoyan Zhou

DOI: https://doi.org/10.1016/j.jallcom.2020.154399

IF: 6.2

2020-01-01

Journal of Alloys and Compounds

Abstract:Synthesizing carbon dots (CDs) with efficient long-wavelength emissions (i.e., yellow-to red light) generally suffer from sophisticated approaches, time-consuming process, harsh conditions, and requirement of organic solvent; also, a further limitation of the resulting CDs is relatively low quantum yield (QY) in aqueous solution. Herein, novel yellow emitting CDs (Y-CDs) with a considerable QY of 62.8% were synthesized from a precursor comprising resorcinol and o-phenylenediamine via a facile microwave method. To probe the fluorescence mechanism, another typical resorcinol-derived CDs using ethylenediamine as dopant were fabricated as well, showing strong green emission with an absolute QY of 60.6%. Spectroscopic and structural characterizations indicated that the distinct redshift of green to yellow emission depended on the dimension of conjugated sp2-domain and the content of graphitic N heavily, while the excellent QY was highly related to the low proportion of defective sp2 carbon cluster and high nitrogen content within CDs. Moreover, the Y-CDs were confirmed to be capable of introducing additional crosslinking points in poly(vinyl alcohol) (PVA) polymer, which resulted in the Y-CDs-contained nanocomposite behaving superior and tunable water-induced shape recovery performances. Importantly, since being labeled with long-wavelength emission, the responsiveness of PVA/Y-CDs composite will contribute to its versatile utilization in biology-relevant fields.
Synthesis of Fluorescent Carbon Dots with Citric Acid for Detection of Iron (Ⅲ) and Cell Imaging

Rong TANG,Chen LI,Zhi-qiang YE,De-meng ZHANG,Xiao-jun MA,Ming-qian TAN,Jing-li YUAN

DOI: https://doi.org/10.13526/j.issn.1006-6144.2015.01.002

2015-01-01

Abstract:A one-step hydrothermal method using citric acid as carbon source was developed for the synthesis of fluorescent carbon dots(CDs).At the excitation wavelength of 310 nm,the quantum yield(QY)of fluorescent CDs is 5.3%.The emission spectra of fluorescent CDs are red-shift along with the bathochromic-shift of excitation wavelength.The as-prepared fluorescent CDs are well dispersed in water,which have an average size of about 2.9nm determined with TEM.FTIR and Zeta potential analysis showed that the fluorescence CDs might contain hydroxyl and carboxyl groups on their surfaces.Fe(Ⅲ)exhibited selective quenching effect to the fluorescent intensity of CDs,which means fluorescent CDs can be used for Fe(Ⅲ)detection.In HEPES buffer(10 mmol/L,pH =7.0)solution,the fluorescence intensity of CDs gradually decreased with Fe(Ⅲ)concentration increasing,and showed a good linear relationship in the range of 100-500μmol/L.The detection limit of this method is 112.5nmol/L.The result of cell imaging incubated with fluorescent CDs indicated that the CDs can penetrate into the B16-F10 cell,and emit multicolor fluorescence under 405 nm and 488 nm laser irradiation.These results revealed that the CDs derived from citric acid might have a potential in Fe(Ⅲ)detection and cell imaging.
Microwave-assisted Synthesis of Colorimetric and Fluorometric Dual-Functional Hybrid Carbon Nanodots for Fe3+ Detection and Bioimaging

Yupeng Shi,Jingjing Liu,Yong Zhang,Jianfeng Bao,Jingliang Cheng,Changqing Yi

DOI: https://doi.org/10.1016/j.cclet.2021.03.022

IF: 9.1

2021-01-01

Chinese Chemical Letters

Abstract:Carbon nanodots (CDs) based fluorescent nanoprobes have recently drawn much attention in chemo-/bio-sensing and bioimaging. However, it is still challenging to integrate the colorimetric and fluorometric dual readouts into a single CD. Herein, novel hybrid CDs (HCDs) are prepared by a simple microwave-assisted reaction of citric acid (CA), branched polyethyleneimine (BPEI) and potassium thiocyanate (KSCN). As-prepared HCDs show extraordinary properties, including excitation-dependent emission, satisfactory fluorescence quantum yield (46.8%), excellent biocompatibility and optical stability. Significantly, the fluorescence intensity at 450 nm exhibits linear correlation over the Fe3+ concentration from 1 mmol/L to 150 mmol/L with a detection limit (LOD) of 52 nmol/L. Meanwhile, the solution color changes from colorless to orange, and the absorbance at 460 nm increased linearly with Fe3+ concentration ranging from 0.02 mmol/L to 5 mmol/L (LOD: 3.4 mmol/L). All the evidence illustrates that the HCDs can be conditioned for specific Fe3+ sensing with colorimetric and fluorometric dual readouts, which has also been verified with paper-based microchips. The possible mechanism is attributed to the specific interactions between surface functional groups on the HCDs and Fe3+. Additionally, the HCDs are successfully applied in sensing Fe3+ in wastewater and living cells, demonstrating its potential applications in future environment monitoring and disease diagnosis. (c) 2021 Chinese Chemical Society and Institute of Materia Medica, Chinese Academy of Medical Sciences. Published by Elsevier B.V. All rights reserved.
Bright-Yellow-Emissive N-Doped Carbon Dots: Preparation, Cellular Imaging, and Bifunctional Sensing.

Kai Jiang,Shan Sun,Ling Zhang,Yuhui Wang,Congzhong Cai,Hengwei Lin

DOI: https://doi.org/10.1021/acsami.5b07255

IF: 9.5

2015-01-01

ACS Applied Materials & Interfaces

Abstract:Fluorescent carbon dots (CDs) have attracted much attention in recent years because of their superior optical and chemical properties, thus demonstrating many potential applications. However, the previously reported CDs mostly show strong emission only in the blue-light region, and the long-wavelength (i.e., yellow- to red-light) emissions are usually very weak. Such a drawback restricts their further applications, particularly in the biology-relevant fields. Herein, a rare example of N-doped CDs that emit bright-yellow fluorescence (i.e., y-CDs) is reported using 1,2,4-triaminobenzene as carbon precursor. The as-prepared y-CDs exhibit not only respectable emission quantum yield and highly optical stabilities but superior biocompatibility and biolabeling potentials. In addition, the y-CDs are found to show an interesting "ON-OFF-ON" three-state emission with the stepwise addition of Ag(+) and cysteine (Cys), indicating potential applications as a bifunctional sensing platform. Thanks to the highly intense emission of y-CDs, the gradual quenching and restoration of their fluorescence with the addition of Ag(+) and further Cys could also be observed with the naked eye. More importantly, the ensemble of the y-CDs and Ag(+) demonstrates practicability for the highly selective and sensitive detection of Cys in human plasma samples with satisfactory results.
Efficient Synthesis of Highly Fluorescent Carbon Dots by Microreactor Method and Their Application in Fe3+ Ion Detection.

Longshi Rao,Yong Tang,Zongtao Li,Xinrui Ding,Guanwei Liang,Hanguang Lu,Caiman Yan,Kairui Tang,Binhai Yu

DOI: https://doi.org/10.1016/j.msec.2017.07.046

2017-01-01

Materials Science and Engineering C

Abstract:Rapidly obtaining strong photoluminescence (PL) of carbon dots with high stability is crucial in all practical applications of carbon dots, such as cell imaging and biological detection. In this study, we proposed a rapid, continuous carbon dots synthesis technique by using a microreactor method. By taking advantage of the microreactor, we were able to rapidly synthesized CDs at a large scale in less than 5min, and a high quantum yield of 60.1% was achieved. This method is faster and more efficient than most of the previously reported methods. To explore the relationship between the microreactor structure and CDs PL properties, Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) were carried out. The results show the surface functional groups and element contents influence the PL emission. Subsequent ion detection experiments indicated that CDs are very suitable for use as nanoprobes for Fe3+ ion detection, and the lowest detection limit for Fe3+ is 0.239μM, which is superior to many other research studies. This rapid and simple synthesis method will not only aid the development of the quantum dots industrialization but also provide a powerful and portable tool for the rapid and continuous online synthesis of quantum dots supporting their application in cell imaging and safety detection.
Preparation of Tunable Full‐color Emission Carbon Dots and Their Optical Applications in Ions Detection and Bio‐imaging

Chao Xia,Mengmeng Cao,Jinfeng Xia,Danyu Jiang,Guohong Zhou,Caiyan Yu,Huili Li

DOI: https://doi.org/10.1111/jace.17112

IF: 4.186

2020-01-01

Journal of the American Ceramic Society

Abstract:In this work, we synthesized a series of novel carbon dots (CDs) by using phenylenediamines (three isomers: o-phenylenediamine, m-phenylenediamine, and p-phenylenediamine) as starting materials via facile solvothermal approach. As-prepared CDs could emit bright blue, green, yellow, orange, and red light with relatively high PLQY, individually. Optical properties could be controlled by simply varying reaction parameters. The luminescent mechanism was investigated and analyzed in detail. Finally, the blue-emitting CDs and green-emitting CDs showed many appealing properties, such as high sensitivity (limit of detection = 4.52 and 3.50 nmol/L), quick response (<2 minutes), broad response window (0-70 nmol/L), and excellent selectivity for detecting Cr6+ and Al3+ cations, respectively. Thus, they have potential to be developed as the corresponding optical probes. While as-prepared orange-emitting CDs could be applied as a bio-imaging reagent due to its long-wavelength emission, relatively high PLQY, low toxicity, excellent water solubility, and good biocompatibility.

Microwave-assisted Facile Synthesis of Yellow Fluorescent Carbon Dots from O-Phenylenediamine for Cell Imaging and Sensitive Detection of Fe3+ and H2O2

Microwave-assisted Synthesis of N,P-doped Carbon Dots for Fluorescent Cell Imaging

Microwave-assisted Hydrothermal Synthesis of Carbon Dots Based on Tyrosine and Their Application in Ion Detection and Bioimaging

Microwave synthesis of chitosan-based carbon dots for Al3+ detection and biological application

Microwave-assisted synthesis of wavelength-tunable photoluminescent carbon nanodots and their potential applications.

Ultra-fast microwave-assisted synthesis of photoluminescent carbon dots with an ultra-high quantum yield for H2O2 detection

One-pot Microwave-assisted Synthesis of Passivated Fluorescent Carbon Dots for Fe(III) Detection

Rapid Solid-Phase Microwave Synthesis of Highly Photoluminescent Nitrogen-Doped Carbon Dots for Fe(3+) Detection and Cellular Bioimaging.

Yellow-Emissive Carbon Dot-Based Optical Sensing Platforms: Cell Imaging and Analytical Applications for Biocatalytic Reactions.

Large-Scale Synthesis of Tunable Fluorescent Carbon Dots Powder for Light-Emitting Diodes and Fingerprint Identification

Yellow Carbon Dots for Fluorescent Water Sensing, Relative Humidity Sensing, and Anticounterfeiting Applications.

Microwave-Synthesized Narrow Emitting Carbon Dots and Their Tunable Fluorescence for Sensing Application

Facile Preparation of Cu-doped Carbon Dots for Naked-Eye Discrimination of Phenylenediamine Isomers and Highly Sensitive Ratiometric Fluorescent Detection of H2O2.

Green Synthesis of Fluorescent Carbon Dots from Ascorbic Acid and Their Application in Sensing and Biological Imaging

Microwave-assisted Fabrication of Multicolor Photoluminescent Carbon Dots As a Ratiometric Fluorescence Sensor for Iron Ions

Facile Synthesis of Yellow Emissive Carbon Dots with High Quantum Yield and Their Application in Construction of Fluorescence-Labeled Shape Memory Nanocomposite

Synthesis of Fluorescent Carbon Dots with Citric Acid for Detection of Iron (Ⅲ) and Cell Imaging

Microwave-assisted Synthesis of Colorimetric and Fluorometric Dual-Functional Hybrid Carbon Nanodots for Fe3+ Detection and Bioimaging

Bright-Yellow-Emissive N-Doped Carbon Dots: Preparation, Cellular Imaging, and Bifunctional Sensing.

Efficient Synthesis of Highly Fluorescent Carbon Dots by Microreactor Method and Their Application in Fe3+ Ion Detection.

Preparation of Tunable Full‐color Emission Carbon Dots and Their Optical Applications in Ions Detection and Bio‐imaging