Abstract:Pulsed fiber lasers with high repetition rates play a crucial role in applications such as high-efficiency processing and bio-optical imaging. However, many ring fiber mode-locked lasers primarily focus on shortening the cavity length to achieve high repetition rate pulse output. Attention is often directed towards the gain fiber and cavity structure, with less consideration given to the challenge of increasing mode-locking threshold power. In this study, we present a high-repetition-rate annular all-fiber laser system with dispersion management. Through strategic adjustment of the intracavity dispersion away from the near-zero dispersion region and careful control of the intracavity gain strength, we have successfully lowered the mode-locking threshold power. This approach can generate pulses with a repetition rate of 439.71 MHz and a mode-locking threshold power of approximately 600 mW. Following pulse compression, the achieved pulse width is 94.8 fs. Its time-bandwidth product is 0.368. To our knowledge, this represents the highest fundamental repetition rate currently attained using a ring all-fiber resonator, accompanied by the lowest mode-locking threshold. Our work introduces a ring fiber laser system characterized by a low mode-locking threshold and a high repetition rate, offering a valuable method for achieving higher fundamental repetition rate pulses.

Linearly Frequency-Modulated Pulsed Single-Frequency Fiber Laser at 1083 Nm.

Single-frequency pulsed fiber laser based on an electro-optic modulator with injection seeding technique

Fiber-solid, Hybrid, Single-Frequency Laser (100 W) with a 100 MHz Repetition Rate and 1 Ns Pulse Width from a Spherical Aberration Compensated Four-Stage Nd:YVO4 Amplifier

Multifrequency Erbium-Doped Fiber Laser Operating at Room Temperature

589 nm laser generation by frequency doubling of a single-frequency Raman fiber amplifier in PPSLT.

Investigations of the High-Power, Single-Frequency, Sub-Microseconds, 1548-nm Fiber Laser Based on the Optical Pulse Modulation

820 Hz linewidth short-linear-cavity single-frequency fiber laser at 1.5 μm

Environmentally-stable 50-Fs Pulse Generation Directly from an Er:fiber Oscillator

Femtosecond Mode-locked Fiber Laser at 1 Μm Via Optical Microfiber Dispersion Management

Stable actively Q-switched single-frequency fiber laser at 1.5 μm based on self-injecting polarization modulation

165 MHz highly stable femtosecond Er:ZBLAN fiber laser operating at 2.8 µm

High Energy and High Power Single Frequency 1572 nm Laser With an All-Fiber MOPA

Single-frequency linear cavity erbium-doped fiber laser for fiber-optic sensing applications

Q-switched fiber laser by all-fiber piezoelectric modulation and pulsed pump

Single-frequency Q-switched erbium-doped fiber ring laser by combination of a distributed Bragg reflector laser and a Mach-Zender interferometer

400 Mw Ultrashort Cavity Low-Noise Single-Frequency Yb^3+-doped Phosphate Fiber Laser

A Compact Low Noise Single Frequency Linearly Polarized DBR Fiber Laser at 1550 nm

High-energy 100-ns single-frequency all-fiber laser at 1064 nm

High-peak-power, single-frequency, single-mode, linearly polarized, nanosecond all-fiber laser based on self-phase modulation compensation

900 MHz Fundamental Repetition Rate Femtosecond Er:fiber Laser Mode Locked by Nonlinear Polarization Evolution

439 MHz, 94 fs, low-threshold mode-locked all fiber ring laser