Abstract:The wide concern on absolute pressure calibration of acoustic transducers at low frequencies prompts the development of the pistonphone method. At low frequencies, the acoustic properties of pistonphones are governed by the pressure leakage and the heat conduction effects. However, the traditional theory for these two effects applies a linear superposition of two independent correction models, which differs somewhat from their coupled effect at low frequencies. In this paper, acoustic properties of pistonphones at low frequencies in full consideration of the pressure leakage and heat conduction effects have been quantitatively studied, and the explicit expression for the generated sound pressure has been derived. With more practical significance, a coupled correction expression for these two effects of pistonphones has been derived. In allusion to two typical pistonphones, the NPL pistonphone and our developed infrasonic pistonphone, comparisons were done for the coupled correction expression and the traditional one, whose results reveal that the traditional one produces maximum insufficient errors of about 0.1dB above the lower limiting frequencies of two pistonphones, while at lower frequencies, excessive correction errors with an explicit limit of about 3dB are produced by the traditional expression. The coupled correction expression should be adopted in the absolute pressure calibration of acoustic transducers at low frequencies. Furthermore, it is found that the heat conduction effect takes a limiting deviation of about 3dB for the pressure amplitude and a small phase difference as frequency decreases, while the pressure leakage effect remarkably drives the pressure amplitude to attenuate and the phase difference tends to be 90° as the frequency decreases. The pressure leakage effect plays a more important role on the low frequency property of pistonphones.

A Dedicated Pistonphone for Absolute Calibration of Infrasound Sensors at Very Low Frequencies

A Reference Infrasound Source with Low Distortion Based on Laser Pistonphone Technology

Nonlinear Distortion Characteristic Analysis for the Finite Amplitude Sound Pressures in the Pistonphone

Analysis of the Sound Pressure in Membrane-Sealed Pistonphone

Development Of Vibration Environment For Calibration Ultra-Low-Frequency Seismometers

Acoustic Properties of Pistonphones at Low Frequencies in the Presence of Pressure Leakage and Heat Conduction

A Long-Stroke Horizontal Electromagnetic Vibrator for Ultralow-Frequency Vibration Calibration

A calculable pistonphone for the absolute calibration of hydrophones in the frequency range from 0.5 Hz to 250 Hz

Development Of Automatic Vibration Calibration System

A Study on Finite Amplitude Standing Waves in Stepped Acoustic Resonator

A Novel Vibration-Level-Adjustment Strategy for Ultralow-Frequency Vibration Calibration Based on Frequency-Shifted Method

Investigation of sound pressure leakage effect for primary calibration down to 10 -2 Hz using a laser pistonphone system

A Study on the Pressure Leakage Correction of Pistonphones at Infrasonic Frequencies

Application of the Quartz-flexure Accelerometer to the Development of Ultra-low Frequency Vibration National Primary Standard Device

Calibration of Hydrophones Using a Frequency Domain Filter Processing Method: Theory and Experiment

High-precision and low-cost vibration generator for low-frequency calibration system

A bionic micro-electromechanical system piezo-resistive vector hydrophone that suppresses vibration noise

A New Floating Piezoelectric Microphone for Fully Implantable Cochlear Implants in Middle Ear.

Mechanical Filter-Based Differential Pressure Fiber-Optic Fabry-Perot Infrasound Sensor

Self-Aligning Optical MEMS Acoustic Sensors With nPa/√Hz Resolution

A Novel MEMS Based Piezoresistive Vector Hydrophone for Low Frequency Detection