Abstract:We designed functionalized hexagonal boron nitride (FhBN) nanoflakes with high proton conductivity in both in- and through-plane directions as next generation polymer electrolyte membranes (PEMs) for energy storage and conversion systems. The synthesis and functionalization of hBN nanoflakes with sulfonic acid (SA) groups are obtained by one-step and in situ liquid-phase exfoliation with excellent dispersibility and stability over a period of three months. The physico/chemical properties of FhBN nanoflakes were investigated by different spectroscopic and microscopic characterization, confirming chemical interactions between hBN lattice and SA groups. High concentrations (65 and 75 wt %) of FhBN nanoflakes composed with Nafion solution formed stable FhBN-Nafion nanocomposite PEMs, offering extra proton conduction sites, doubling ion-exchange capacity, and reducing the swelling ratio compared to those of Nafion. Our results demonstrate that both the in-plane and through-plane proton conductivities of FhBN-Nafion PEMs significantly improve under various conditions comparative to that of Nafion. The maximum values of both in- and through-plane conductivities for FhBN75%-Nafion PEM at 80% of humidity and 80 °C are 0.41 and 0.1 S·cm–1, respectively, which are 7 and 14 times higher than those of Nafion. The bidirectional superionic transport in highly concentrated FhBN PEMs is responsible for outstanding properties, useful for electrochemical energy devices.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c21234?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c21234</a>.FTIR spectra of FhBN-Nafion nanocomposite PEMs (Figure S1); UV–vis absorbance spectra for hBN and FhBN (Figure S2); zeta potential measurements for hBN and FhBN (Table S1); Tyndall effect (Figure S3); deconvoluted XPS spectra of N 1s in FhBN and hBN and XPS spectra of B 1s and N 1s for hBN (Figure S4); XPS elemental composition (Table S2); description of Raman spectroscopy test; TEM characterization of hBN and FhBN; structural characterization of hBN: SAED, TEM, and EDS; structural characterization of FhBN: SAED, TEM, and EDS (Figure S5); description of AFM imaging method; AFM and height analyses for FhBN, typical AFM scans of deposited FhBN nanoflakes, statistical distribution of layer number per particle, and 3D scans of deposited FhBN nanoflakes (Figure S6); SEM characterization of membranes; SEM images of hBN and FhBN nanoflakes and XRD spectra of hBN and FhBN nanoflakes (Figure S7); surface and cross-sectional SEM images of Nafion and FhBN-Nafion nanocomposite membranes (Figure S8); EDS elemental mapping of selected area of Nafion (Figure S9), FhBN65%-Nafion (Figure S10), and FhBN75%-Nafion (Figure S11); water contact angle measurements in Nafion and FhBN-Nafion PEMs (Figure S12); calculation of the activation energy from Arrhenius plots (Figure S13); procedure for calculation of water content values of membranes at T = 25 °C, RH = 80%; and determination of optical bandgaps of hBN and FhBN from the UV spectra (Figure S14) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c21234/suppl_file/am0c21234_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Sandwiching H-Bn Monolayer Films Between Sulfonated Poly(ether Ether Ketone) and Nafion for Proton Exchange Membranes with Improved Ion Selectivity

SPEEK-based composite proton exchange membrane regulated by local semi-interpenetrating network structure for vanadium flow battery

Achieving Better Balance on the Mechanical Stability and Conduction Performance of Sulfonated Poly(ether Ether Ketone) Proton Exchange Membranes Through Polydopamine/polyethyleneimine Co-Modified Poly(vinylidene Fluoride) Nanofiber As Support

High Ion Conductive and Selective Membrane Achieved through Dual Ion Conducting Mechanisms

Bidirectional Superionic Conduction in Surface-Engineered 2D Hexagonal Boron Nitrides

Novel Composite Proton Exchange Membrane with Connected Long-Range Ionic Nanochannels Constructed Via Exfoliated Nafion-Boron Nitride Nanocomposite.

Improved Performance of Sulfonated Poly Ether Ether Ketone/three-Dimensional Hierarchical Molybdenum Disulfide Nanoflower Composite Proton Exchange Membrane for Fuel Cells

Highly selective and high-performance sulfonated poly(ether ether ketone)-based hybrid membrane enabled by complexed UiO-66-NH2 and sulfonated graphitic carbon nitride for vanadium flow battery

Toward Cheaper Vanadium Flow Batteries: Porous Polyethylene Reinforced Membrane with Superior Durability

Highly selective proton exchange membranes for vanadium redox flow batteries enabled by the incorporation of water-insoluble phosphotungstic acid-metal organic framework nanohybrids

Stable Boron Nitride Nanocomposites Based Membranes for High-Efficiency Proton Conduction

Consecutive and reliable proton transfer channels construction based on the compatible interface between nanofiber and SPEEK

CNT@polydopamine Embedded Mixed Matrix Membranes for High-Rate and Long-Life Vanadium Flow Batteries

Ultra-thin h-BN doped high sulfonation sulfonated poly (ether-ether-ketone) of PTFE-reinforced proton exchange membrane

Electrospinning-assisted Construction of Rapid Proton Conduction Channels in Halloysite Nanotube-Encapsulated Ionic Liquid-Embedded Sulfonated Poly(ether Ether Ketone) Proton Exchange Membranes

Bifunctional Effects of Halloysite Nanotubes in Vanadium Flow Battery Membrane

Development of Proton Conduction Membranes in Application of Vanadium Flow Battery

Pyridine-extended proton sponge enabling high-performance membrane for flow batteries

Sub‐2‐nm Channels within Covalent Triazine Framework Enable Fast Proton‐Selective Transport in Flow Battery Membrane

Enhanced proton selectivity and stability of branched sulfonated polyimide membrane by hydrogen bonds construction strategy for vanadium flow battery

Zwitterionic interface engineering enables ultrathin composite membrane for high-rate vanadium flow battery