Abstract:Carbon-based perovskite solar cells show great potential owing to their low-cost production and superior stability in air, compared to their counterparts using metal contacts. The photovoltaic performance ofcarbon based PSCs, however, has been progressing slowly in spite of an impressive efficiency when they were first reported. One of the major obstacles is that the hole transport materials developed for state-of-the-art Au-based PSCs are not suitable for carbon-based PSCs. Here, we develop a low-temperature, solution-processed Poly(3-hexylthiophene-2,5-diyl) (P3HT)/graphene composite hole transport layer(HTL), that is compatible with paintable carbon-electrodes to produce state-of-the-art perovskitedevices. Space-charge-limited-current measurements reveal that the as-prepared P3HT/graphene composite exhibits outstanding charge mobility and thermal tolerance, with hole mobility increasing from 8.3 x 10(-3) cm(2)V(-1)s(-1) (as-deposited) to 1.2 x 10(-2)cm(2)V(-1)s(-1) (after annealing at 100 degrees C)-two orders of magnitude larger than pure P3HT. The improved charge transport and extraction provided by the composite HTL provides a significant efficiency improvement compared to cells with a pure P3HT HTL. As aresult, we report carbon-based solar cells with a record efficiency of 17.8% (certified by Newport); and the first perovskite cells to be certified under the stabilized testing protocol. The outstanding device stabilityis demonstrated by only 3% drop after storage in ambient conditions (humidity: ca. 50%) for 1680 h (non-encapsulated), and retention of ca. 89% of their original output under continuous 1-Sun illumination atroomtemperature for 600 h (encapsulated) in a nitrogen environment. (c) 2019 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology.

A low-temperature carbon electrode with good perovskite compatibility and high flexibility in carbon based perovskite solar cells.

Low-temperature Preparation Achieving 10.95%-Efficiency of Hole-Free and Carbon-Based All-Inorganic CsPbI3 Perovskite Solar Cells

Carbon Quantum Dot-Passivated Perovskite/Carbon Electrodes for Stable Solar Cells

Carbon-Based Electrode Engineering Boosts the Efficiency of All Low-Temperature-Processed Perovskite Solar Cells

All‐Carbon‐Electrode‐Based Endurable Flexible Perovskite Solar Cells

Hole Transport Free Flexible Perovskite Solar Cells with Cost-Effective Carbon Electrodes

Dendritic Growth Lowers Carbon Electrode Work Function for Efficient Perovskite Solar Cells

Work Function Tuning of Carbon Electrode to Boost the Charge Extraction in Hole Transport Layer‐Free Perovskite Solar Cells

Low-temperature solution-processed perovskite solar cells with high efficiency and flexibility.

Enhanced flexibility and light utilization for high-efficiency all-air-processed carbon-based perovskite solar cells

Back interface management by multifunctional composite carbon nanospheres electrode for efficient and stable HTL-free carbon-based perovskite solar cells

Cost effective perovskite solar cells with a high efficiency and open-circuit voltage based on a perovskite-friendly carbon electrode

Low‐Temperature‐Deposited TiO 2 Nanopillars for Efficient and Flexible Perovskite Solar Cells

Highly Stable Carbon-Based Perovskite Solar Cell with a Record Efficiency of over 18% Via Hole Transport Engineering

An Ultrathin Ferroelectric Perovskite Oxide Layer For High-Performance Hole Transport Material Free Carbon Based Halide Perovskite Solar Cells

High-Quality PEI/Ag/PEI-Zn Semitransparent Electrode for Efficient ITO-Free Flexible Organic Solar Cells and Perovskite Solar Cells

Perovskite Solar Cells: All‐Carbon‐Electrode‐Based Endurable Flexible Perovskite Solar Cells (adv. Funct. Mater. 11/2018)

Highly Efficient and Stable Perovskite Solar Cells via Modification of Energy Levels at the Perovskite/Carbon Electrode Interface

Efficiently Improving the Stability of Inverted Perovskite Solar Cells by Employing Polyethylenimine-Modified Carbon Nanotubes As Electrodes.

High photoelectric conversion efficiency and stability of carbon-based perovskite solar cells based on sandwich-structured electronic layers

Improved Interfacial Contact between "Perovskite/Electron‐Transport‐Layer" by Hydrophilic Molecule to Achieve Efficiency > 14%, Carbon‐electrode Basing, Hole‐Conductor‐Free, Low‐temperature Mesoscopic Perovskite Solar Cells