Abstract:During the past few decades, water contamination has raised a huge concern due to rapid industrialization, agricultural wastes, metal galvanizations, and leather industries as a result of the discharge of organic pollutants, dyes and heavy metals. The present study investigates the synthesis of copper oxide nanoparticles (CuO-NPs) and graphene oxide-copper oxide nanoparticles (GO/CuO-NPs) for heavy metal ions adsorption like Ni 2+ and Cd 2+ from wastewater. For this purpose, batch and continuous adsorption studies were performed. The chemical and physical characteristics were analyzed by FTIR, XRD, SEM, and AFM. AFM analysis confirmed the hexagonal structure and an average diameter of 79.91, 82.01 and 21.45 nm for GO/CuO-NP, CuO n , and CuO m , respectively. In batch scale, it is concluded that GO/CuO-NPs showed the best adsorption capacity for Ni 2+ and Cd 2+ than CuO n and CuO m at pH value of 8, adsorbent dose of 250 mg, initial concentration of 50 mg/L, a contact time of 15 min. GO/CuO-NP showed the maximum Ni 2+ and Cd 2+ removal of 99.16 and 98.84 % respectively at 15 min contact time. Similarly, the maximum Ni 2+ and Cd 2+ ions removal of about 99.37 and 99.18 % was observed with GO/CuO-NPs at an adsorbent dose of 250 mg and 50 mg/L dye concentration. The adsorbent isotherm and kinetic analysis revealed that the results were best fitted with Langmuir isotherms and the Pseudo-second order model, respectively. While in continuous adsorption analysis, GO/CuO-NPs showed the best adsorption capacity for Ni 2+ and Cd 2+ than CuO n and CuO m at an initial concentration of 50 to 75 mg/L, a flow rate of 4 mL/min, and a bed height of 1.5 to 2 cm. However, the present study provides valuable insight into novel nanocomposites' development to eliminate Ni 2+ and Cd 2+ from industrial wastewater.

Functionalized Graphene Nanosheets As Absorbent for Copper (II) Removal from Water.

Preparation of Cotton-Based Fibrous Adsorbents for the Removal of Heavy Metal Ions.

Highly adsorptive removal of heavy metal, dye, and antibiotic pollutants using functionalized graphene nanosheets sono-electrochemically derived from graphitic waste

Acid-resistant chitosan/graphene oxide adsorbent for Cu2+ removal: The role of mixed cross-linking and amino-functionalized

Efficient Removal of Copper Ion from Wastewater Using a Stable Chitosan Gel Material

Attached β-cyclodextrin/γ-(2,3-epoxypropoxy) propyl trimethoxysilane to graphene oxide and its application in copper removal

Removal of copper ions by cellulose nanocrystal-based hydrogel and reduced adsorbents for its catalytic properties

Graphene Oxide/cufe2o4 Foam As an Efficient Absorbent for Arsenic Removal from Water

Amination/oxidization Dual-Modification of Waste Ginkgo Shells As Bio-Adsorbents for Copper Ion Removal

Functionalised graphene oxide dual nanocomposites for treatment of hazardous environmental contaminants

Eco-Friendly Carbon Nanotubes Reinforced with Sodium Alginate/Polyacrylic Acid for Enhanced Adsorption of Copper Ions: Kinetics, Isotherm, and Mechanism Adsorption Studies

Insights into the synthesis of monolithic and structured graphene bulks and its application for Cu 2+ ions removal from aqueous solution

Adsorption Behavior of Copper Ions on Graphene Oxide–chitosan Aerogel

Sulfonated Graphene Nanosheets As A Superb Adsorbent for Various Environmental Pollutants in Water

Preparation of graphene oxide/polyiminodiacetic acid resin as a high-performance adsorbent for Cu(II)

Carbon Nanoparticles As Recyclable Adsorbent for the Removal of Copper Ions

Selective adsorption of Cu(II) on amino-modified alginate-based aerogel: As a catalyst for the degradation of organic contaminant

Superhigh co-adsorption of tetracycline and copper by the ultrathin g-C3N4 modified graphene oxide hydrogels

Removal of copper ions from water using polysaccharide-constructed hydrogels

Fabrication of nitrogen-doped carbon dots biomass composite hydrogel for adsorption of Cu (II) in wastewater or soil and DFT simulation for adsorption mechanism

Copper(II) ion removal from aqueous solutions using alginate nanoparticles/ carboxymethyl cellulose/ polyethylene glycol ternary blend: Characterization, isotherm and kinetic studies