Abstract:In recent years, a new generation of storage ring based light sources, known as diffraction limited storage rings (DLSRs), whose emittance approaches the diffraction limit for the range of X ray wavelengths of interest to the scientific community, has garnered significant attention worldwide. Researchers have begun to design and build DLSRs. Among various DLSR proposals, the hybrid multibend achromat (HMBA) lattice enables sextupole strengths to be maintained at a reasonable level when minimizing the emittance; hence, it has been adopted in many DLSR designs. Based on the H7BA lattice, the design of the Advanced Photon Source Upgrade Project (APSU) can effectively reduce emittance by replacing six quadrupoles with antibends. Herein, we discuss the feasibility of designing an APSU type HMBA lattice for the Southern Advanced Photon Source, a mid energy DLSR light source with ultralow emittance that has been proposed to be built adjacent to the China Spallation Neutron Source. Both linear and nonlinear dynamics are optimized to obtain a detailed design of this type of lattice. The emittance is minimized, while a sufficiently large dynamic aperture (DA) and momentum acceptance (MA) are maintained. A design comprising 36 APSU type H7BAs, with an energy of 3 GeV and a circumference of 972 m, is achieved. The horizontal natural emittance is 20 pm rad, with a horizontal DA of 5.8 mm, a vertical DA of 4.5 mm, and an MA of 4%, as well as a long longitudinal damping time of 120 ms. Subsequently, a few modifications are performed based on the APSU type lattice to reduce the longitudinal damping time from 120 to 44 ms while maintaining other performance parameters at the same level.

Optimizing the Lattice Design of a Diffraction-Limited Storage Ring with a Rational Combination of Particle Swarm and Genetic Algorithms

Low emittance lattice optimization using multiobjective genetic algorithm

Simultaneous Optimization of Beam Emittance and Dynamic Aperture for Electron Storage Ring Using Genetic Algorithm

Design of a Hybrid Ten-Bend-achromat Lattice for a Diffraction-Limited Storage Ring Light Source

Towards the Ultimate Storage Ring: the Lattice Design for Beijing Advanced Photon Source

Advances in Physical Design of Diffraction-Limited Storage Ring

Design of a Diffraction-Limited Storage Ring Lattice Using Longitudinal Gradient Bends and Reverse Bends

Design Study of APSU Type Hybrid MBA Lattice for Mid Energy DLSR

Numerical optimization of a low emittance lattice cell

DA Optimization Experiences in the HEPS Lattice Design

Study of solution diversity in multi-objective optimization of storage ring lattice

PEPX-type Lattice Design and Optimization for the High Energy Photon Source

A Hybrid Multi-Objective Optimization Method and Its Application to Electromagnetic Device Designs

A Fast Method for Multi-Objective Nonlinear Dynamics Optimization of a Storage Ring

Nonlinear optimization for a low‐emittance storage ring

Emittance optimization under magnet strength limitation for a multi-bend achromat lattice

Comparing the Performance of MOGA and MOPSO in Optimization of the HEPS Performance

Geometrical Optimization of Arrayed Waveguide Grating with Low Diffraction Order

A Hybrid Algorithm Based on NSGA-II and MOPSO for Multi-objective Designs of Electromagnetic Devices

A Hybrid Diffractive Optical Element Design Algorithm Combining Particle Swarm Optimization and a Simulated Annealing Algorithm

Emittance optimization using particle swarm algorithm