Abstract:Drawing-tower fiber Bragg grating (FBG) array can be used in health monitoring of bridges, pipelines and some large-scale projects to realize temperature, stress and vibration quasi-distributed sensing. The grating array sensing system can detect the changes of the tested physical parameters by measuring the central wavelength of the grating. However, for the sensing system based on identical grating array consisting of uniform FBGs, it cannot measure accurately the shift of the reflective wavelength of a grating in the array due to the sidelobe superposition of the gratings. Compared with uniform Bragg grating, apodized FBG has smaller reflection peak sidelobes. It means that the reflection power of the apodized FBG can be concentrated to the central wavelength region, and the reflection peak signal will be not interfered with those of other gratings. In this paper, an apodized FBG array was in-line fabricated in a single mode fiber by on a drawing tower and used for dense quasi-distributed temperature sensing. The obtained apodized FBGs have a full width at half maximum (FWHM) of 0.09 nm and their sidelobes were decreased by -21.9 dB. A 1000-meter-long array consisting of 10000 apodized gratings was successfully fabricated and used for quasi-distributed temperature sensing. These gratings have good consistency, low transmission loss and good mechanical properties. Experimental results show that the array can accurately measure quasi-distributed temperature fields and the temperature sensitivity is 10.15 pm/degrees C. It is expected that the apodized grating array can find more applications in many fields.

Multichannel Fiber Bragg Grating for Temperature Field Monitoring

Air Gap Fiber Bragg Grating for Simultaneous Strain and Temperature Measurement

A Cheap and Practical FBG Temperature Sensor Utilizing a Long-Period Grating in a Photonic Crystal Fiber

A Temperature and Strain Sensor Based on a Cascade of Double Fiber Bragg Grating

High-Spatial-Resolution High-Temperature Sensor Based on Ultra-Short Fiber Bragg Gratings With Dual-Wavelength Differential Detection

Simultaneous Dynamic-Strain and Temperature Monitoring Using a Wavelength-Multiplexed Fibre-Fabry-Perôt Array with Low-Coherence Interrogation

Simultaneous Strain and Temperature Measurements with Fiber Bragg Grating Written in Novel Hi-Bi Optical Fiber

Temperature Sensor Based on Multimode Fiber Bragg Grating

A Temperature Self-Adapting Fiber Bragg Grating Dynamic Sensor System

Quasi-Distributed Temperature Sensing Using Apodized Fiber Bragg Grating Array

Simultaneous Measurement of Strain and Temperature Using Pi-Phase-Shifted Fiber Bragg Grating on Polarization Maintaining Fiber

Fiber Bragg grating temperature sensor for marine application

Sensitivity enhanced strain and temperature measurements based on FBG and frequency chirp magnification.

Temperature-controlled Fiber Bragg Grating Dynamic Strain Detection System

Simultaneous Independent Temperature and Strain Measurement Using One Fiber Bragg Grating Based on the Etching Technique

Simultaneous Measurement of Temperature and Strain Based on Compact Parallel Core–Cladding FBGs Inscribed by Femtosecond Laser Point-by-Point Method

In-fiber Bragg-grating Temperature Sensor System for Medical Applications

Intensity-Modulated Fiber Bragg Grating Sensor System Based on Radio-Frequency Signal Measurement

High Temperature High Sensitivity Optical Fibre Sensor Based on Multimode Fibre Bragg Grating

Design and Analysis of a Combined FBG Sensor for the Measurement of Three Parameters.

High-Resolution Strain/Temperature Sensing System Based on A High-Finesse Fiber Cavity and Time-Domain Wavelength Demodulation