Abstract:Accurately predicting the tool remaining useful life (RUL) is critical for maximizing tool utilization and saving machining costs. Various physical model-based or data-driven prediction methods have been developed and successfully applied in different machining operations. However, many uncertain factors affect tool RUL during the cutting process, making it challenging to create a precise physical model to characterize the degradation of tool performance. The success of the purely data-driven technique depends on the amount and quality of the training samples, it does not consider the physical law of tool wear, and the interpretability of the prediction results is poor. This paper presents a data-model linkage approach for tool RUL prediction based on deep feature fusion and Wiener process to address the above limitations. A convolutional stacked bidirectional long short-term memory network with time-space attention mechanism (CSBLSTM-TSAM) is developed in the data-driven module to fuse the multi-sensor signals collected during the cutting process and then obtain the mapping relationship between signal features and tool wear values. In the physical modeling module, a three-stage tool RUL prediction model based on the nonlinear Wiener process is established by considering the evolution law of different wear stages and multi-layer uncertainty, and the corresponding probability density function is derived. The real-time estimated tool wear of the data-driven module is used as the observed value of the physical model, and the model parameters are dynamically updated by the weight-optimized particle filter (WOPF) algorithm under a Bayesian framework, thereby realizing the data-model linkage tool RUL prediction. Milling experiments demonstrate that the proposed method not only improves RUL prediction accuracy, but also has good generalization ability and robustness for prediction tasks under different working conditions.

A Hybrid Approach to Cutting Tool Remaining Useful Life Prediction Based on the Wiener Process

Non-linear Wiener process–based cutting tool remaining useful life prediction considering measurement variability

Tool remaining useful life prediction considering wear state based on hybrid attention network

Cutting tool wear prediction based on the multi-stage Wiener process

Data-model linkage prediction of tool remaining useful life based on deep feature fusion and Wiener process

Remaining useful life prediction for an adaptive skew-Wiener process model

Enhanced Wear Prediction of Tunnel Boring Machine Disc Cutters for Accurate Remaining Useful Life Estimation Using a Hybrid Model

Three-Stage Wiener-Process-Based Model for Remaining Useful Life Prediction of a Cutting Tool in High-Speed Milling

A hybrid method for cutting tool RUL prediction based on CNN and multistage Wiener process using small sample data

Remaining Useful Life Prediction Based on Spindle Load and Cutting Process Parameters in Machining

Hybrid data-driven physics-based model fusion framework for tool wear prediction

Research on the Milling Tool Wear and Life Prediction by Establishing an Integrated Predictive Model

Prediction of the remaining useful life of cutting tool using the Hurst exponent and CNN-LSTM

A novel approach for predicting tool remaining useful life using limited data

Remaining Useful Life Prediction for a Nonlinear Heterogeneous Wiener Process Model With an Adaptive Drift

Cutting tool prognostics enabled by hybrid CNN-LSTM with transfer learning

Cutting tool remaining useful life prediction based on robust empirical mode decomposition and Capsule-BiLSTM network

Research on tool remaining useful life prediction algorithm based on machine learning

Remaining Useful Life Prediction of Rolling Element Bearings Based on Hybrid Drive of Data and Model

Tool wear prediction based on convolutional bidirectional LSTM model with improved particle swarm optimization

Note on cellular degeneration in the protonema of polytrichum commune