Abstract:In the field of high-capacity bidirectional converters, paralleled LLC converters are usually used to increase the output power and system power density. However, because of the production tolerances the parameters of the resonant components for each paralleled unit may not be completely identical. The gain characteristic of the LLC resonant converter is sensitive to the parameters of the resonant components. For the paralleled converters, because voltage gains can be slightly different from each other for a same input, system output current may be poorly shared among the parallel units. In this paper, novel paralleled CLLLC converters are proposed. For the proposed converters, the load current sharing performance is not sensitive to component parameter differences or derivations. Equal load sharing can be realized easily. And no additional components or controllers are needed. The gain characteristics are analyzed and they are similar with that of a single CLLLC resonant converter. The mathematical model of the paralleled converters is deduced based on fundamental harmonic approximation (FHA) method. And the load current sharing errors for the conventional and proposed paralleled CLLLC converters are compared or analyzed by introducing variables such as the load current sharing coefficient. It is shown that for the same set of component parameters, when the conventional paralleled converters are used most of the load may be supported by a single converter while the output power of another one is small. On the other hand, for the cases of parameter derivations, the current sharing performance of the novel proposed paralleled converters is obviously much better. And finally the effectiveness of current sharing for the proposed paralleled CLLLC converters is verified by simulations and experiments.

Full-Differential Paralleled High Slew Rate Linear Current Sink and Applications

Current Equalizing for a Multi-Modular Current Source Converter

Design of parallel switch power supply system for arbitrary proportion of shunt

A Digital Self-Current-Sharing Method for Modular Parallel High Step-Down LLC System

High Dynamic Performance Solar Array Simulator Based on a SiC MOSFET Linear Power Stage

Dynamic Current Balancing for Paralleled SiC MOSFETs with Circuit Mismatches Considering Circulating C Urrent in Drive Circuit

High-Power High-Dynamic-Performance Space Solar Array Simulator Using Step-Wave Tracking Output Voltage Approach

The Research on Carrier Phase-shift SPWM and Circulating Currents in Parallel Converters

Circuit-level Parallel Strategies of Three Phase PWM Converters Without Zero Sequence Circulating Current

Multichip Parallel Double-Sided Cooling Silicon Carbide Power Module With Low Parasitic Inductance and Balanced Dynamic Current

Parallel Converter Scheme for Large Power High Compensation Precision Shunt Active Power Filters

Optimized Design of Space Solar Array Simulator with Novel Three-Port Linear Power Composite Transistor Based on Multiple Cascaded SiC-JFETs

Symmetric Circuit Layout with Decoupled Modular Switching Cells for Multiparalleled SiC Mosfets

Current Discrepancy Mitigation of Input-Parallel Output-Parallel Dual-Active-Bridge Converters Using Coupled Inductors

High-efficiency Switch-Linear-hybrid Space Solar Array Simulator with a Simple Thermal Design Method for Linear Power Stage

SIGNAL PROPAGATION IN HIGH SPEED DIFFERENTIAL TRANSMISSION LINE USING PARALLELIZED FINITE-DIFFERENCE TIME-DOMAIN METHOD

An Effective Current Balancing Method for Inverters with Paralleled Silicon Carbide Power Modules

A Novel Circulating Current Suppression for Paralleled Current Source Converter Based on Virtual Impedance Concept

Comprehensive Analysis of Paralleled SiC MOSFETs Current Imbalance under Asynchronous Gate Signals

Automatic Current Sharing Of Input-Parallel Output Parallel Dual Active Bridge Converters With Coupled Inductors

Current Sharing Analysis for Novel Paralleled CLLLC Converters