Abstract:Purpose – The purpose of this paper is to propose a new three-phase switched reluctance motor (SRM), and achieve high-torque and low-cost. This new SRM's winding configuration uses the double-layer distributed windings, which is different from the conventional SRM's single tooth coils. Design/methodology/approach – The operating principle of new SRM is analyzed, and the voltage equation and the generated torque are deduced. Finite element method (FEM) and finite element circuit coupled method are utilized to evaluate the new motor's operating performances. The two dimensional (2D) frequency response analysis model is employed in the FEM model. Based on the 2D frequency response analysis model, the magnetic field distribution, self-inductance, and mutual-inductance for the new SRM are analyzed in detail. A co-simulation model using FE analysis package and Matlab-Simulink is proposed to simulate the new SRM drive. The simulated and experimental results verify the new SRM. Findings – For the new SRM with double-layer distributed windings, a co-simulation method is proposed to analyze its characteristics. The new SRM presents lower torque ripple coefficient and generates larger torque than the conventional SRM, with three-wire and standard full bridge power converter, rather than six-wire and asymmetric half-bridge converter for conventional SRM. Originality/value – This paper proposes a new SRM with the double-layer distributed windings driven by a standard full bridge inverter. In order to calculate dynamic characteristics of the new SRM, a co-simulation method using FEM and Simulink is proposed to simulate the new SRM drive, where the power inverter and the current chopping control algorithm are implemented.

Comparative Evaluation of a Six-Phase Switched Reluctance Motor with Double Phase Excitation Based on Two Power Converters

Investigation Of Direct Torque Control And Torque Sharing Function Strategy For Switched Reluctance Motor Applications

Power converter for switched reluctance motor with single power switch per phase and dual power supply

Multi-level Converter-Based Torque Sharing Function Control Strategy for Switched Reluctance Motors

Design and Torque Optimization of Single-phase Hybrid Switched Reluctance Motors

Study on switched reluctance motor using three-phase bridge inverter: Analysis and comparison with asymmetric bridge

Performance Evaluation on a Novel Power Converter With Minimum Number of Switches for a Six-Phase Switched Reluctance Motor.

A Novel Boost Chopper Converter-Based Torque Sharing Function Control Strategy for Switched Reluctance Motors

Analysis of average torque in switched reluctance motor with unipolar and bipolar excitations based on an improved Fourier series model

Modular Full-Bridge Converter for Three-Phase Switched Reluctance Motors With Integrated Fault-Tolerance Capability

A New Phase Current Reconstruction Scheme For Four-Phase Srm Drives Using Improved Converter Topology Without Voltage Penalty

Performance Improvement for Segmented-Stator Hybrid-Excitation SRM Drives Using an Improved Asymmetric Half-Bridge Converter

Equivalent circuit model and static performance of three phase switch reluctance motor with full bridge converter

Investigation on a Multimode Switched Reluctance Motor: Design, Optimization, Electromagnetic Analysis, and Experiment

Investigation of Skewing Effects on the Vibration Reduction of Three-Phase Switched Reluctance Motors

Switched Reluctance Motor Converters for Electric Vehicles Applications: Comparative Review

Six-phase induction machine driven by the matrix converter

A Novel Boost Converter for Segmented-Stator Hybrid-Excitation Switched Reluctance Motor Drive with High Performance

Overview of multi-phase switched reluctance motor drives for electric vehicles

Study on Energy Ratio of Switched Reluctance Motor Drive Based on Open Loop, Ccc and Ditc

A New Switched Reluctance Motor with Distributed Winding