Abstract:The effects of inner surface topography on friction force and the coefficient of friction between an inner surface of needle and tissue phantom during needle insertion and on biopsy length are examined using polished, and unpolished needles. In this paper, the inner surfaces of the needles are altered by magnetic abrasive finishing (MAF), and the needle inner surfaces were smoothed from 0.43 to 0.02µm Sa (referred to as the smoothly polished needle) or 0.26µm Sa (referred to as the roughly polished needle). With polyvinyl chloride (PVC) as a tissue-mimicking phantom material, the smoothly polished needle results in the smallest inner friction force (0.0024N/mm), the smallest coefficient of friction (0.35), and the longest biopsy length (34.3mm). The roughly polished needle produces the largest inner friction force (0.0041N/mm), the largest coefficient of friction (0.56), and the shortest biopsy length (30.5mm). Although the inner surface roughness of the roughly polished needle is lower than that of the unpolished needle, the inner friction force and coefficient of friction are larger than those of the unpolished needle. This may be caused by the ridges and grooves in the circumferential direction of the roughly polished needle made with MAF. Based on the surface topography data, the ratchet mechanism is utilized to calculate the coefficient of friction. The results suggest a higher coefficient of friction in the roughly polished needle. The biopsy tests also show the shortest biopsy sample is extracted using the roughly polished needles, which exhibit the greatest inner friction force.

Five-plane Lancet Needle Design for Soft PVC Phantom Tissue Cutting

Advanced Five-Plane Lancet Needle Design, Grinding, and Tissue Insertion

The Needle With Lancet Point: Geometry for Needle Tip Grinding and Tissue Insertion Force

Modeling of geometry and insertion force of a new lancet medical needle

Cutting Force Of Hollow Needle Insertion In Soft Tissue

Optimal Needle Design for Minimal Insertion Force and Bevel Length.

Tissue Cutting Mechanics and Applications for Needle Core Biopsy and Guidance

Contributions in Medical Needle Technologies—geometry, Mechanics, Design, and Manufacturing

Modeling cutting edge geometry for plane and curved needle tips

Surface-blended Texturing of Medical Needles for Friction Reduction Using a Picosecond Laser

Modeling Of The Plane Needle Cutting Edge Rake And Inclination Angles For Biopsy

Experimental Study of Needle–tissue Interaction Forces: Effect of Needle Geometries, Insertion Methods and Tissue Characteristics

A method for predicting needle insertion deflection in soft tissue based on cutting force identification

Research on Mechanical Properties of Bevel-Tip Needle Based on Image Guidance.

Needle Deflection Modeling and Verification during Insertion into Soft Tissue

Bevel-Tip Needle Deflection Modeling, Simulation, and Validation in Multi-Layer Tissues

Blade oblique cutting of tissue for investigation of biopsy needle insertion

Effects of Needle Inner Surface Topography on Friction and Biopsy Length

A Review on Tissue-Needle Interaction and Path Planning Models for Bevel Tip Type Flexible Needle Minimal Intervention

The Tip Interface Mechanics Modeling of a Bevel-Tip Flexible Needle Insertion

Mechanics-based modeling of needle insertion into soft tissue