Abstract:As one of the key components in scanning near-field optical microscopes (SNOM), optical fiber probes can be fabricated by use of either laser-heated pulling or chemical etching. For high-resolution near-field imagine, the nearfield optical signal is rapidly attenuated as the aperture of probes decreases. It is thus important to fabricate probes optimized for aperture size and optical transmission. We present a two step fabrication method of 50%similar to 70% reproducibility to obtain probes with high optical transmission efficiency as well as small tip diameters. First, optic fiber probes with the transitional taper in hyperbolic or parabolic shape are produced by use of the simple home-made device for heating-pulling. Then, a rapid chemical etching with 40% buffered hydrofluoric acid is used to sharpen the tip while keeping the taper shape and the conic angle unchanged. The method renders us to achieve probes with tip diameters in the range of 20nm similar to 200nm and the tape angle near the tip apex in the range of 20 degrees similar to 60 degrees. Particularly, the length of the non-propagating evanescent wave modes region decreases greatly to tens of micrometers or even less. In order to test the achieved probes, we give the photon tunneling decay curve and scanning near-field optical image of holographic grating by use of PSTM mode and collection-mode SNOM, respectively. In addition, an approach curve of shear force with hyperbolic probe is shown to verify its applicability to sample-tip distance regulation on basis of the principle of shear-force.

Nondestructive Measurement of Nanofiber Diameters Using Microfiber Tip

Modeling of nanoparticle-induced Rayleigh–Gans scattering for nanofiber optical sensing

Recent Progress in Optical Micro/Nanofiber Technology

A Novel Far-Field Nanoscopic Velocimetry for Nanofluidics

Real-time Control of Micro/nanofiber Waist Diameter with Ultrahigh Accuracy and Precision

Femtoliter-scale Optical Nanofiber Sensors.

Nondestructive Profilometry of Optical Nanofibers

Ultrahigh-Precision Diameter Control of Nanofiber Using Direct Mode Cutoff Feedback

Single nanoparticle detection and sizing by using a nanoscale optical fiber

Single Nanoparticle Detection and Sizing Using a Nanofiber Pair in an Aqueous Environment.

Nanoparticles: Single Nanoparticle Detection and Sizing Using a Nanofiber Pair in an Aqueous Environment (Adv. Mater. 44/2014)

Parallel Fabrication of Silica Optical Microfibers and Nanofibers

Fabrication Methods and High-Precision Diameter Control Techniques of Optical Micro-/Nanofibers

Fabrication And Characterization Of Near-Field Optical Fiber Nanoprobes With High Resolution And High Transmission Efficiency

In-situ characterization of optical micro/nano fibers using scattering loss analysis

In situ characterization of optical micro/nano fibers using scattering loss analysis

High-Sensitivity Microfiber Strain and Force Sensors

A nanonewton force sensor using a U-shape tapered microfiber interferometer

Optical microfibers and their applications

T-type Raman spectroscopy method for determining laser absorption, thermal conductivity and air heat transfer coefficient of micro/nano fibers

Fabrication and Characterization of Fiber-Optic Nano-Probes with High Transmission Efficiency and High Resolution